Pellet press

CPM 2000

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. Iajdpfjtxinajx Ah Nsl The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press)

Condition: new, capacity 2000 kg/h power 4,0 (5,2) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 875 mm width 735 mm height 1 410 mm insertion resp. discharge height 1 510 mm weight 55 kg material varnished steel discharge height 450 mm suitable for pomaceous fruit, turnips, potatoes, corn, etc scope of delivery schredder disc Iasdpfx Aob Nvinoh Nol

Year of construction: 1994, condition: excellent (used), Longitudinal Flow Dryer in Cabinet Design Internal chamber length approx. 4300 mm Internal chamber width approx. 750 mm Internal chamber height approx. 630 mm Chamber volume 2.3 m³ Side loading – cabinet version with loading trolley Vertical lift door, spring-assisted Manual / fully automatic control Electronic control MP 902 Longitudinal ventilation Fans: 1 unit Fan motor power 0.55 kW, 400 V, 50 Hz Heating electric 4.2 kW Required space approx. 5500 mm x 1100 mm x 1300 mm Iajdoxug Dcjpfx Ah Nol Weight INCLUDES: Aluminium stacking battens Wood moisture measurement probes Various spare parts Operating manual, electrical schematic, etc. Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Iaedpfxecbukrs Ah Nel Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. Ijdpou R Rtbefx Ah Noal The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² - Elevation, steel construction - Conveyor belts, distribution belts Iaodpfx Ajtynftoh Nol - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The system is in very good technical condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Iaedpfx Ajw Dv Aioh Njl Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h Iasdpfxjvdrtxj Ah Nol

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Ijdsr Dvdkspfx Ah Njal

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. Iaodoq Hr Rzjpfx Ah Njl - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets