Press

New Holland BR 750 Crop Cutter

Year of construction: 2021, condition: used, Agomac log splitter • Splitting force: 18 tons • Large work table • Safe two-hand operation with automatic return Ffjdpfsx I Dq Ajx Afnet • 3 adjustable settings for splitting larger or smaller logs • Suitable for three-point hitch and fork insertion • Sturdily built • User-friendly Condition: Used Year of manufacture: 2021

Condition: used, Year of construction: 2016, front tire size: 600/70R28, rear tire size: 710/75R38, Equipment: compressed air brake,

Condition: new, axle configuration: 2 axles, loading space length: 4,250 mm, loading space width: 2,150 mm, loading space height: 600 mm, loading space volume: 5 m³, color: red, Carrying capacity: 12.000 kg Ffsdexmu Nwopfx Afnot

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Fjdpfowu Dbuox Afnjft Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: used, Year of construction: 2016, operating hours: 3,200 h, power: 232 kW (315.43 HP), next inspection (TÜV): 09/2024, Equipment: air conditioning, all wheel drive, cabin, front linkage, * Deutz-Fahr 9340 TTV * First registration: 29.04.2016 * Year of construction: 2016 * Operating hours: 3,184 h * Adjustable and heated mirrors * Automatic air conditioning * LED work lights * 60km/h top speed * Performance Steering ready with ''EASY-STEER'' function * Cat III top link for FHK with automatic catch hook * External FHK actuation with 7-pin and 3-pin front socket * Load sensing with 210 ltr/min * Additional el. control unit at the rear with 2x DW connections * Suspended and braked front axle * ISOBUS preparation Fjdjvht Hnopfx Afneft * i-Monitor 2 12'' screen with color camera * K80 ball head coupling -----Internal vehicle number: 9251----Errors and omissions excepted.

Condition: new, Year of construction: 2025, CORMAK PT260 230V Jointer-Thickness Planer – NEW VERSION Compact and precise woodworking machine for professional and hobby use The jointer-thickness planer is a versatile woodworking tool that allows for accurate flattening, thicknessing, and surface smoothing of wood. Ideal for furniture making, carpentry, and material preparation, it performs jointing, planing, edge processing, board production, and surface preparation for gluing. Featuring a durable cast iron table, three-blade cutterhead, powerful motor, and precise adjustment controls, it ensures high performance with ease of use. Applications The CORMAK PT260 230V jointer-thickness planer is ideal for: Woodworkers and craftsmen producing furniture elements, moldings, and wood structures Renovation and construction workshops processing raw and laminated timber Hobby workshops seeking a reliable, high-precision planer for home use Schools and training centers providing hands-on woodworking education on professional equipment Standard Equipment Ø75 mm cutterhead with 3 knives (250 × 30 × 3 mm) Fedpjw H R Aiofx Afneft Jointer table: 1100 × 250 mm Thickness planer table: 600 × 248 mm Adjustable aluminum fence: 700 × 150 mm (tilting 90–45°) Anti-vibration rubber feet Dust port Ø100 mm Operating manual (Polish and English) CE Declaration of Conformity Optional Accessories Mortising and drilling attachment Chip and dust extraction unit Knife setting jig Roller support stands Key Features ✅ Durable cast-iron construction ✅ Compact design suitable for small workshops ✅ Smooth and accurate planing and jointing ✅ Quick adjustments for thickness and depth ✅ Efficient chip removal via 100 mm extraction port Technical Specifications Parameter Value Cutterhead diameter 75 mm Cutterhead speed 4000 rpm Number of knives 3 Knife dimensions 250 × 30 × 3 mm Jointer table size 1100 × 250 mm Thickness planer table size 600 × 248 mm Max. jointing width 250 mm Max. jointing depth 5 mm Max. thicknessing depth 2.5 mm Max. thicknessing cutting depth 3 mm Max. workpiece height for thicknessing 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Fence tilt angle 90° – 45° Dust port diameter Ø100 mm Overall dimensions (L × W) 1100 × 250 mm Machine weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 230 V CE certification Yes

Condition: used, Year of construction: 2025, operating hours: 158 h, Equipment: onboard computer, Claas Lexion 5400 Demo machine from 2025 Engine hours: 170 Drum hours: 96 Area: 279 hectares Equipment: Generation 1 Header drive XL, two-speed Cutterbar feed roller with 2-way system, M V-channel – AUTO CONTOUR, chain, open return roller Automatic drawbar coupling Dust extraction for E-/V-/HP-channel CRUISE PILOT, pre-equipped Header brake APS threshing system – Grain/Maize (10/18/18) Drum speed: 330–930 rpm Concave bar Center ridge for straw walker, fitted JET STREAM cleaning system, incl. 3D and grass wind reduction GRAINMETER incl. returns volume measurement with CEBIS display Top and bottom sieve, standard Grain tank 10,000 liters Grain tank prepared for unloading auger with grass support XL grain tank unloading auger, Ø 330 mm Grain tank unloading capacity 110 l/s Drive for grain tank unloading 80 l/s – 130 l/s Swivelable spout – XL grain tank unloading auger, Ø 330 Standard distributor – SPECIAL CUT, PREMIUM LINE, with SV Straw chopper drive for standard distributor – Premium Driving axle M – 20-bolt, with differential lock Drive axle tires: 800/70 R38 CHO 181D, 20-bolt Access ladder with collision protection Steering axle M, adjustable Steering axle tires: 600/65 R28 x 275 IMP, 8-bolt Travel speed 40 km/h Mercedes-Benz OM936 LA – 260 kW/354 hp (Stage V), air-cooled Fuel tank 950 liters Engine PTO pump Automatic climate control with heating, incl. additional pre-filter Radio sound system, digital (DAB+) with subwoofer Storage compartments with USB-C port in B-pillar Sun blinds for side windows Footrests on steering column, right/left Smartphone holder with wireless charging function Leather armrest and leather steering wheel Camera system, pre-equipped Rear-view camera, display in terminal Camera – drawbar coupling, PROFI CAM display Camera cable – XL grain tank unloading auger Camera – grain tank unloading auger, PROFI CAM display Camera monitor – PROFI CAM Connection cable for A-pillar for CEMIS/PROFI CAM QUANTIMETER yield measurement Premium seat – leather, air-suspended LED work lights – Premium incl. work high-beam Steering interface prepared Steering system software for FIELD SCANNER Grain tank prepared for GPS PILOT Cool box, incl. instructor’s leather seat CEMOS DIALOG via CEBIS CEMOS AUTOMATIC – AUTO CROP FLOW CEMOS AUTOMATIC – AUTO SLOPE CEMOS AUTOMATIC – CRUISE PILOT Without GRAIN QUALITY CAMERA CMOTION multifunction lever Auto module Add-on module 1 Add-on module 2 Inclination sensor Steering angle sensor Fodpfx Afoxmluqenoft CLAAS communication module (LTE) FIELD SCANNER forefield sensor Locking system, standard LED rear lights, extendable Windscreen wiper system for front and side windows CAN Ethernet Gateway (CEG) GPS PILOT Ready Straw distribution plate adjustment module – standard distributor Machine connect license – 5 years Without centralized lubrication system Straw distribution plate adjustment, hydraulic – standard distributor Automatic direction adjustment for spreading Straw chopper – counter-blade/friction plate adjustment, hydraulic Dynamic steering Rear-view mirrors, electrically adjustable and heated Automatic chain lubrication for grain tank unloading Hose reel with air compressor hose and air gun Hand-wash tank including Claas Vario 770 and transport trolley Equipment: Rapeseed side knife, left Rapeseed side knife,

Condition: excellent (used), For sale: a package of power generators: -ERCOLE MARELLI 1312T 12 cylinders, twin-turbo Power: 270 kVA; 216 kW -VM V12130I 12 cylinders, twin-turbo Power: 250kVA; 200kW -VM V6130 6 cylinders Power: 100kVA Ffedjvq Ighepfx Afnjt Option to purchase individual units. Tag: generator, power generator, electricity generator, portable generator, diesel generator, gas generator, backup power, emergency power, standby generator, inverter generator

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Ffsdpfx Aou A Igcsfnot

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Ffedeki Einopfx Afnjt