Drilling machines

ALZMETALL AB 3

Condition: good (used), Column drilling machine ALZMETALL AB 3 ES from training facility - Well-maintained original condition - Drilling capacity / steel: 35 mm - Throat depth: 280 mm - Table size: 600x470 mm - Drilling stroke: 180 mm Kodpfx Asycv Tded Nowt - Morse taper MK 3 - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: LxWxH 1.2x0.8x2 meters / Weight 450 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 8618030, Offer 25182 Technical Data: - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm Ksdpowq It Tjfx Ad Nswt - Rear roller and bottom roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right + left: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - With: - asymmetrical roller arrangement - crown-turned naturally hardened rollers - manual adjustment of rear rollers - pre-bending - pivotable top roller - electric foot switch for right and left rotation

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Kjdpfxoharwve Ad Newt Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Year of construction: 1978, number of spindles 3 bore capacity in steel (diameter) 40 mm Kwedpfx Aded Ih S Ss Net bore stroke 180 mm weight of the machine ca. 2,3 t

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. Kwodpfxegulr He Ad Njt column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: used, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 180 mm 3 speeds 65 - 1750 U/min table-size 600 x 470 mm total power requirement 1,6 kW weight 450 kg dimensions 1200 x 800 x 2200 mm Kwsdpfxewzmt Te Ad Nst Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light - Drill chuck

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm Kjdpfxjxabuas Ad Njwt bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm Kwedjhturcopfx Ad Not plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Condition: ready for operation (used), Beautiful Alzmetall industrial column drilling machine, ready for use and immediately available. Column drilling machine manufacturer: Alzmetall, model AB3 / ESV. The machine runs smoothly and drills precisely, just like on the first day. It is equipped with a retrofitted emergency stop switch and thus complies with DGUV Regulation 3, which was valid until 10/25 and can be renewed upon request. Technical data: - Drilling capacity in steel: 32 mm - Spindle mount: MK3 - Throat depth: 290 mm - Quill stroke: 160 mm Kodpfx Aox Tfkzod Newt - Speed range: 30 - 1600 RPM - Motor power: 380V, 4.4 A = 2.3 HP according to nameplate - Machine weight: approx. 500 kg Used machine, fully operational, in well-maintained condition. Additional accessories available. Details, video, or test run upon request. Inspection by appointment possible. Delivery no problem.

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. * Ksdpsu Idkzefx Ad Njwt

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm Kwjdjwncaiepfx Ad Not - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ES Machine No. 21703 Year of manufacture: 1981 Drilling capacity: 32 mm Spindle taper: MK 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless through variator gearbox - Intermediate gear stage for high torque at low speeds - RPM counter for spindle speed - Table height adjustable by handwheel Kedpfsvu Dv Hjx Ad Newt - Machine lamp - Emergency stop via foot switch and kick switch - Quick-action drill chuck 1 to 13 mm Space requirement L x W x H: 1200 x 650 x 1900 mm Weight: 400 kg Very good condition Machine tested with 30 mm drill diameter in steel - runs very well

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10100, table width: 300 mm, table length: 400 mm, spindle speed (max.): 1,400 rpm, drilling depth: 150 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Placing a bid obliges timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: from 200 to 1,400 rpm Drilling depth: up to 150 mm Table dimensions: 400 x 300 mm Slots: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 300 kg Kwodpfx Asxqdw Eed Nst

Condition: new, Timesavers Series 12 WW Kwedpfx Aowqf U Ujd Njt The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm.

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED Kwedpfx Adexd Trfe Nst - Thread cutting device - Coolant device B Available immediately from stock