second-hand machinery for sale (1,767)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, Feed rate X-axis: 150,000 mm/min, Cutting width (max.): 5 mm, Workpiece length (max.): 6,200 mm, Workpiece diameter (max.): 550 mm, Sawing system is exclusively available via the auction - no other purchase possible! No minimum price - guaranteed sale at the highest bid! New price in 2005 approx. 9,000,000 EUR, new price today approx. 15,000,000 EUR Collection/shipping: Plant is ready for shipment, dismantled and loaded into 11 40-foot containers and 4 special oversize units Loading costs = 0 EUR EU shipping possible for approx. 250,000 EUR Uuubxcrpzt ASSEMBLY - Measuring conveyor: A pair of photocells in front of the log scanner monitors: Position of the upper end of the log, X and Y position of the tip, volume, conicity, length, curve, position of the curve - Log chipper: According to the log information, the rotating rollers of the first rotor are positioned in x and y direction on the center of the upper end of the log and the rotor is rotated by the angle that corresponds to the curvature of the log. - Profile chipper (chipper canter): Four surfaces of the log are chipped by chipping heads. - Cant scanning conveyor: The edge is transported in a straight line by a chain conveyor through the edge scanner and fed to the edge saw. - Edge scanner: The edge curvature and profile are measured in the edge scanner. Based on these measurement results, the PC optimizes the edging of the side boards in the cross-cut saw and the rip saw. - Edge saw (cant saw): In the cross-cut saw, side boards (1-2 pieces/side) are sawn from the sawn edge. The side boards are trimmed in two trimming units immediately after sawing. - EK2 separating conveyor: The separating conveyor separates the side boards and synchronizes them with the side pusher conveyor. - Cant turner: The edge turner is used to turn the edge by 90° around the longitudinal axis. - Infeed conveyor: The design of the infeed conveyor includes a chain-driven horizontal roller unit equipped with three lateral roller units. - Ripsaw: The circular saw unit of the ripsaw is mechanically similar to the cross-cut saw. The trimming unit is similar to the 2nd trimming unit of the cross-cut saw. With the rip saw, the edge is cut into side boards (1 piece/side) and middle boards (1-7 pieces). TECHNICAL DETAILS Upper end diameter: 100 - 420 mm Diameter of the large end: max. 550 mm Log length: 2.4 - 6.2 m Feed speed: 50 - 150 m/min Tilting height in the chipper edge: 75 - 410 mm Chip width in the profile chipper: 75 - 350 mm Edge saw through diameter: 75 - 350 mm Saw cut width: 4.2 - 5.2 mm Clearance height in the rip saw: 63 - 310 mm Clearance width in the rip saw: 75 - 410 mm Saw cut width: 3.6 - 5.0 mm Panel thickness: max. 50 mm Chip length: 20 - 30 mm MACHINE DETAILS Installation dimensions: approx. 10.5 x 87.5 x 8 m Total output: approx. 3,350 kW Conveyor belt: approx. 20.7 x 2.8 x 3.0 m; 11 t Log stacker: approx. 2.6 x 3.1 x 3.6 m; 6.5 t Edge conveyor belt: approx. 18.0 x 2.7 x 2.7 m; 11 t Edge saw: approx. 5.5 x 5.6 x 5.1 m; 33 t EK2 separating conveyor: approx. 10.7 x 1.8 x 3.0 m; 12 t Edge turner: approx. 1.1 x 2.5 x 3.7 m; 3 tons Infeed conveyor: approx. 6.1 x 2.2 x 1.8 m; 4 tons Ripsaw: approx. 4.8 x 6.0 x 5.1 m; 30 t Hydraulic unit: approx. 3.3 x 2.8 x 2.4 m EQUIPMENT - Log laying devices - 3 seeders - Conveyor for waste treatment - Electrical and control system - Hydraulic system - Comprehensive documentation: manual, maintenance plans, circuit diagrams, assembly plans, etc.

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, Machine/vehicle number: 181721, Clamping force: 350,000 N, Screw diameter: 18 mm, Pressure: 2.2 bar, Displacement volume: 25 cm³, Ejector force: 20,100 N, Ejector stroke: 105 mm, TECHNICAL DETAILS Clamping force: 350 kN Opening stroke: 205 mm Ejector stroke: 105 mm Ejector force: 20.1 kN Hu3Pntg Injection unit Screw diameter: 18 mm Max. stroke volume: 25 cm³ Max. screw speed: 450 rpm Max. current screw speed: 450 rpm Injection flow: 52 cm³/s Injection flow increased: 40 cm³/s Specific injection pressure: 2,200 bar Specific injection pressure increased: 2,193 bar Nozzle travel: 530 mm Nozzle contact pressure: 28.6 kN MACHINE DETAILS Machine weight: 6,700 kg L x W x H: 6 x 1.5 x 2.5 m

Condition: ready for operation (used), Functionality: fully functional, Workpiece height (max.): 60 mm, TECHNICAL DETAILS Workpiece thickness range: 10 - 60 mm Control: CNI Panel height: max. 60 mm PVC/ABS thickness: 3 mm Feed speed: 25 m/min Motorized top pressure belt: Yes Pre-milling unit: Yes Magazine tape reel holder: Yes, with 6 positions C93Dqly Grooving unit: Yes Preheating unit for the plate with lamps: Yes Infeed guide: Manual Anti-adhesion unit: Yes Gluing system: EVA, premelter for EVA glue Softforming unit: Yes End cutting unit with automatic tilt control: Yes Glue stripper: Yes Buffing unit: Yes

Condition: excellent (used), Year of construction: 2011, Operating hours: 2,132 h, Functionality: fully functional, Machine/vehicle number: 501, Spindle motor power: 3,700 W, Turning diameter: 20 mm, Rotational speed (max.): 10,000 rpm, Machining length: 250 mm, TECHNICAL DETAILS Main spindle Control: FANUC 31I - model A turning diameter: 20 mm Machining length: 250 mm Speed: 10,000 rpm Spindle power: 3.7 kW Counter spindle Speed: 10,000 rpm Spindle power: 2.2 kW B-axis Max. Drilling diameter: diam. 6 Max. Thread diameter: M5 Max. Spindle speed: 5,000 rpm MACHINE DETAILS Weight: 3.3 tons Dimensions: 2200 x 1400 x 1900 mm Switch-on time: 25,139 h or 1,508,330 min Processing time: 2,132 h or 127,879 min Cutting time: 979 h or 58,736 min Cccnujg EQUIPMENT - Bar loader IEMCA BOSS 332 - Chip conveyor

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Travel distance X-axis: 1,050 mm, Travel distance Y-axis: 6,000 mm, Travel distance Z-axis: 350 mm, Number of slots in tool magazine: 24, Swivel angle A-axis (max.): 540 °, Swivel angle B-axis (max.): 200 °, No minimum price - guaranteed sale at the highest bid! Bids must be submitted for collection by 22.10.2024. TECHNICAL DETAILS X-axis: 1050 mm Y-axis: 6000 mm Z-axis: 350 mm A-axis: 540° B-axis: 200° Universal unit: 8 kW SK 40 with 2 integrated CNC axes A and B Angular units: prepared for mounting Tool magazine: Tool chain changer with 24 places Control system: 921 Vector Software: COMPASS, Version 8 EQUIPMENT - Vacuum pump 140 m³/h with intermediate tank 250 l - Laser positioning Uh20B3Y2Kf - Integrated chip conveyor belt - Accessories and tools

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Measuring range X-axis: 900 mm, Measuring range Y-axis: 1,600 mm, Measuring range Z-axis: 800 mm, TECHNICAL DETAILS Measuring range: 900 x 1,600 x 800 mm Control unit: UC-200H Computer/CPU: Demonstrator/new device Screen: Demonstration unit Printer: Demonstration unit Software: Mitutoyo MCosmos-1 Geopak-WIN Additional hardware: Renishaw PH-10M Probe holder: Renishaw PH-10M E2Pn9Ay Probe head: Renishaw TP200 Calibration sphere: Ceramic Renishaw interchangeable rack: 1 x SCR-200 incl. 5 x TP-200 modules EQUIPMENT - Operating instructions - Various sensing spheres and extensions

Condition: ready for operation (used), Functionality: fully functional, Machine/vehicle number: 28830006532, Travel distance X-axis: 600 mm, Travel distance Y-axis: 560 mm, Travel distance Z-axis: 560 mm, Rotational speed (max.): 15,000 rpm, Swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis movement: 560 mm Z-axis movement: 560 mm C-axis movement: 360° Control: Siemens 840D Rotary storage: RS4 Speed: 15,000 rpm Number of pallets: 4 pieces MACHINE DETAILS Connected load: 80 kVA Operating voltage: 400 V, 50 Hz Hu3Omwc EQUIPMENT - Loading device on the tool changer - Tool breakage control - IKZ system - KM spray gun - Electric handwheel

Condition: ready for operation (used), Year of construction: 2006, Operating hours: 54,000 h, Functionality: fully functional, Machine/vehicle number: 199796, Clamping force: 350,000 N, Injection pressure: 2 bar, Injection weight: 45 g, Plate width: 380 mm, Plate length: 380 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: Universal machine / can be used in horizontal and vertical position Ukad28Nnxt Clamping force: 35 t Distance between the beams: 270 x 270 mm Panel dimensions: 380 x 380 mm Injection unit Screw diameter: 25 mm Injection volume: 49 cm³ Weight of the shot (PS): 45 g Injection pressure: 2,000 bar Cores: 1+2 Heating zones: 3 MACHINE DETAILS Operating hours: 54,000 h Weight: 2500 kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Turning diameter over cross slide: 762 mm, Turning length: 864 mm, Turning diameter: 432 mm, Spindle bore: 76 mm, Spindle speed (max.): 3,400 rpm, Spindle speed (min.): 30 rpm, TECHNICAL DETAILS Turning diameter over cross slide: 762 mm Turning length: 864 mm Turning diameter: 432 mm Tool turret: 12-position, VDI40 Spindle bore: 76 mm Spindle speed: max. 3,400 rpm Spindle speed: min. 30 rpm MACHINE DETAILS Total height: 1,900 mm Total length: 2,200 mm Total width: 3,300 mm Cccmvbg EQUIPMENT Tool probe Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, Travel distance X-axis: 800 mm, Travel distance Y-axis: 700 mm, Travel distance Z-axis: 600 mm, Spindle speed (min.): 20 rpm, Spindle speed (max.): 18,000 rpm, Number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Ulwmzjbgon Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping surface: 800 x 630 mm Max. Table load: 800 kg Holding torque on the table top: 3,500 Nm Table speed round: 13.6 rpm Table feed round: 3,600°/min Pallet storage: 5-fold Tool magazine Tool holder: SK40 Number of tool slots in the magazine: 120 Max. Tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input unit: 0.001 mm EQUIPMENT - Electronic manual control panel: available - Measuring probe: available - Tool breakage control: available - Flushing gun: present - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: available

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, Machine/vehicle number: 8086010645B, Turning length: 320 mm, Spindle speed (max.): 6,500 rpm, Turning diameter: 42 mm, Travel distance X-axis: 50 mm, Travel distance Y-axis: 350 mm, Travel distance Z-axis: 120 mm, TECHNICAL DETAILS Control: Fanuc 160i Cccod7G Workpiece diameter: max. 42 mm Workpiece length: max. 320 mm Bar passage: max. 42 mm X-axis travel: max. 50 mm Y-axis travel: max. 350 mm Z-axis travel: max. 120 mm Main spindle Spindle speed: 6,500 rpm Counter spindle spindle speed: 6,500 rpm Axes Number of linear axes: 6 Number of C-axes: 2 MACHINE DETAILS Weight: 4,700 kg Connected load: 40 kVA EQUIPMENT - Loading magazine Iemca Boss 545E 32 LL, 2011 - High-pressure system with integrated oil cooling - Kraft and Bauer extinguishing system - Chip conveyor system - Parts conveyor belt - Machine documentation

Condition: good (used), Year of construction: 2011, Operating hours: 7,003 h, Functionality: fully functional, Machine/vehicle number: 20111102, Travel distance X-axis: 800 mm, Travel distance Y-axis: 510 mm, Travel distance Z-axis: 630 mm, Controller model: Fanuc A 100, Rotational speed (max.): 10,000 rpm, Number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc A100 Technology: Belt spindle Speed: 10,000 rpm Tool holder: SK40 Traverse path X: 800 mm Travel Y: 510 mm Z travel: 630 mm Tool magazine Tool magazine: 24 stations Tool holder: SK40 Tool change time: 2.5 s Chip to chip time: 5.5 s Tool weight: 7 kg Tool length: 250 mm Table and clamping Distance spindle to table: 100 - 730 mm Clamping surface: 950 x 510 mm Workpiece weight (max.): 500 kg T-slots: 3x 18 x 160 mm Rapid traverse Rapid traverse X: 30 m/min Gpcz0C Rapid traverse Y: 30 m/min Rapid traverse Z: 30 m/min MACHINE DETAILS Weight: 6 tons Switch-on time: 33,641 h Spindle hours: 7,003 h Workpiece counter: 54254 EQUIPMENT - Chip screw - IKZ system with filter - Measuring probe, m&h IRP 25.10 - Electronic handwheel - Spindle cooler

Condition: good (used), Year of construction: 2007, Operating hours: 24,287 h, Functionality: fully functional, Machine/vehicle number: H-H5022, Travel distance X-axis: 1,270 mm, Travel distance Y-axis: 660 mm, Travel distance Z-axis: 610 mm, Controller model: Ultimax, Spindle speed (max.): 12,000 rpm, Number of slots in tool magazine: 40, TECHNICAL DETAILS Control system: Hurco Ultimax X travel: 1,270 mm Y travel: 660 mm Z travel: 610 mm Speed: 12,000 rpm Power: 15 kW Torque: 238 Nm Tool magazine Tool magazine: 40 stations Tool holder: SK40 Tool diameter: 75 mm Tool length: 300 mm Tool weight: 10 kg Table and clamping Clamping surface: 1,500 x 660 mm T-slots: 6x 18 x 1000 mm Table load (max.): 1,300 kg Spindle to table distance: 150 - 760 mm Rapid traverse Rapid traverse X: 30 m/min Rapid traverse Y: 30 m/min Rapid traverse Z: 20 m/min MACHINE DETAILS Dimensions: 3,250 x 2,350 x 2,950 mm Weight: 9 tons Uka3Cz8O9X EQUIPMENT - Chip conveyor - IKZ system with filter and high pressure - Tool measurement: laser, BLUM - Interface measuring probe prepared - Electronic handwheel - Spindle cooler

Condition: ready for operation (used), Year of construction: 2015, Operating hours: 19,718 h, Functionality: fully functional, Machine/vehicle number: 233358, Clamping force: 500,000 N, Screw diameter: 20 mm, Injection pressure: 2.5 bar, Ejector force: 30,000 N, Ejector stroke: 70 mm, TECHNICAL DETAILS Model: 375 V 500 - 100 Sliding table Operating hours: 19,718 h Clamping unit Clamping force: 50 tons Opening stroke (max.): 30 / 250 kN/mm Mold height (variable): 172 - 272 mm Clamping platen height (variable): 422 - 522 mm Stroke of the shuttle table: 650 mm Weight on shuttle table: max. 240 kg Weight of the movable molded part: max. 230 kg EUROMAP drying time: 3 - 240 s Ejector force / stroke: 30 / 70 kN / mm Injection unit Screw diameter: 20 mm Effective screw length: L/D 25 Screw stroke: max. 80 mm Calculated stroke volume: max. 31 cm³ Shot weight: max. 29 g PS Material throughput: max. 5.5 kg/h PS, 2.8 kg/h PA6.6 Injection pressure: max. 2,500 bar Holding pressure: max. 2,500 bar Gpczns Injection flow: max. 64 cm³/s Peripheral speed of the screw: max. 28 m/min Screw torque: max. 120 Nm Nozzle contact force / stroke: max. 50 kN / 180 mm Heating power / zones: 6.7 kW / 5 zones Material hopper: 25 l MACHINE DETAILS Weight: 3,700 kg Dimensions: 3,250 x 2,524 x 1,475 mm

Condition: ready for operation (used), Year of construction: 2003, Functionality: unexamined, Machine/vehicle number: 573385, Travel distance X-axis: 525 mm, Travel distance Y-axis: 400 mm, Travel distance Z-axis: 450 mm, Die-sinking EDM machine with MultiChange IMC4 TECHNICAL DETAILS Travel distance: 525 x 400 x 450 mm Y-position electrode change: 675 mm Drive: AC servo motors, digital Rapid traverse: 2 m/min Digital resolution: 0.001 mm C-axis: 1 - 20 rpm Load capacity with/without changer: 15 / 50 kg Work table: 730 x 630 mm Load: max. 1,000 kg Dielectric tank: 400 l Filter surface area: 4 m² Lifting container: 750 x 650 x 420 mm Dielectric height: 375 mm IMC 4 Electrode magazine: Double magazine Uh3Tgr9Pct Number of electrodes: 182 Gripper: Double gripper Workpiece pallet magazine: 8 pieces Size per workpiece: 320 x 320 x 240 mm (alternative) MACHINE DETAILS Main dimensions: 2.2 x 2.15 x 2.54 m Weight, ready for operation: 4.8 t Connected load: 7 kVA IMC 4 Floor space: 2,800 x 4,101 mm Connected load: 11.6 kVA

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Machine/vehicle number: R50066, Rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of axes: 2 axes Basic tools: included Spindle speed: 6,000 rpm MACHINE DETAILS Supply voltage: 400 V, 50 Hz Uh3Asqp33L

Condition: new, Year of construction: 2022, Functionality: fully functional, Laser power: 1,000 W, Sheet thickness aluminum (max.): 3 mm, Sheet thickness steel (max.): 8 mm, Sheet thickness brass (max.): 2 mm, Travel distance X-axis: 3,048 mm, Travel distance Y-axis: 1,524 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Travel X / Y / Z: 3048 / 1524 / 120 mm Speed: 100 m/min C93Cyxq Sheet weight: max. 900 kg Positioning accuracy: ± 0.05 mm/m Repeat accuracy: ± 0.03 mm Cutting head: Bodor Genius Laser source: Bodor Thinker Control: Bodor Thinker Laser power: 1kW Sheet thickness steel: 8 mm Sheet thickness stainless steel: 4 mm Sheet thickness aluminum: 3 mm Brass sheet thickness: 2 mm MACHINE DETAILS Dimensions: 4955 x 2280 x 2200 mm Weight: 7500 kg Power: 23.4 kW

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Turning length: 580 mm, Turning diameter: 100 mm, Spindle speed (max.): 8,000 rpm, Bar diameter: 36 mm, TECHNICAL DETAILS Control: Sinumerik 840 D Bar diameter: 36 mm Chuck diameter: 100 mm Turning length: 580 mm Rotation diameter over bed: 145 mm Turning diameter: 100 mm Speed: 2 x 25 - 8,000 rpm Pick-up spindle: yes Indexing: 2 x C-axis, 0.001° degrees Turret head Number of turret heads: 2 x 12-fold VDI 25 Driven tool stations: 2 x 12 Tool speed: 31 - 6,300 rpm MACHINE DETAILS Total power requirement: 50 kVA Machine weight: approx. 6 t Space requirement: approx. 4.8 x 2.2 x 2 m Fzjerl0 EQUIPMENT - SIMAG bar loader 42.1, year of construction 2000

Condition: ready for operation (used), Year of construction: 2009, Operating hours: 15,926 h, Functionality: fully functional, Machine/vehicle number: 15405042144, Travel distance X-axis: 635 mm, Travel distance Y-axis: 510 mm, Travel distance Z-axis: 460 mm, Workpiece length (max.): 790 mm, Workpiece width (max.): 560 mm, Workpiece weight (max.): 600 kg, Rotational speed (max.): 14,000 rpm, TECHNICAL DETAILS CNC control: Siemens 840D X-axis travel: 635 mm Y-axis travel: 510 mm Z-axis travel: 460 mm Feed speeds: 20 m/min Rapid traverse: 30 m/min Axis acceleration: 5 m/s² Work table Number of pallets: 1 Pallet dimensions: 560 x 790 mm Distance between spindle nose and table surface: 720 mm Max. Workpiece weight: 600 kg Spindle Max. Spindle speed: 14,000 rpm Spindle drive power: 18.5 / 15 kW (40% ED / cont) Spindle torque: 100 / 74 Nm Ukqvzpdrzn Tool system Tool holder: SK40 Number of tools in the magazine: 30 Tool diameter with free adjacent positions: 130 mm Tool diameter with occupied neighboring slots: 80 mm Max. Tool length: 300 mm Chip-to-chip time: 6 s MACHINE DETAILS Total power requirement: 35 kVA Length: 2,275 mm Width: 3,288 mm Height: 2,670 mm Hours under power: 22,597 h Spindle hours: 15,926 h

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, Clamping force: 400,000 N, Screw diameter: 25 mm, Injection pressure: 2.09 bar, Displacement volume: 69 cm³, Ejector force: 20,000 N, Ejector stroke: 100 mm, TECHNICAL DETAILS Gpczt0 Control unit: CC100 Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector stroke: 100 mm Opening max.: 570 mm Opening min.: 270 mm Size of the clamping plate: 590 x 340 mm Injection unit Screw diameter: 25 mm Length of screw: 140 mm Injection volume: 69 cm³ Injection pressure: 2,090 bar Pump drive power: 15 kW Weight: 5,400 kg

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, Machine/vehicle number: 800-10026, Saw band length: 6,650 mm, Saw band width: 38 mm, Cutting range round at 90°: 600 mm, Cutting width (max.): 808 mm, Cutting height (max.): 500 mm, Cutting range square at 90°: 808 mm, Cutting range square at 45°: 440 mm, TECHNICAL DETAILS Ukqpi2Mqhh Saw drive: 5.5 kW Hydraulic drive: 1.5 kW Cutting capacity flat at 90°: 808 x 500 mm Cutting capacity flat at 45°: 440 x 500 mm Cutting capacity round at 90°: 600 mm Cutting capacity round at 45°: 480 mm Saw head Saw head swivel range: -5° to +45° Saw blade Saw blade speed: infinitely variable 25 - 80 m/min Saw blade dimensions: 38 x 1.3 x 6,650 mm Cooling system Coolant system: cooling water MACHINE DETAILS Space requirement: 22,000 x 2,000 x 2,410 mm Transport dimensions: 13 loading meters Weight: approx. 6,000 kg

Year of construction: 2002, Operating hours: 2,500 h, Condition: ready for operation (used), Functionality: fully functional, Rotor diameter: 220 mm, Rotor width: 160 mm, Sieve perforation: 7 mm, Machine/vehicle number: 101738.200-1001, TECHNICAL DETAILS Throughput: 100 - 200 kg/h Rotor diameter: 220 mm Rotor width: 160 mm Number of rotor knives: 3 Number of stator knives: 2 Hole diameter screen: 7 mm Upz8Ly9Ws7 Inlet cross-section: approx. 400 x 400 mm Drive motor: 3/5 kW Drive power: 6.5 kW Number of gears: 2 DESCRIPTION The centrifugal force generated by the turning rotor throws the material to be crushed through the open rotor against the grinding chamber wall formed by the screen and the stator knives. This encloses a grinding chamber that is completely closed over 360°. There, between the rotor and stator knives, it is ground into a sharply cut and low-dust product. The rotor is open, which means that low masses have to be moved due to the design, resulting in low energy consumption. Through two perforated screens arranged around the grinding chamber, the unmixed regrind is now quickly discharged by an integrated, powerful extraction system, subsequently dedusted and then added to the virgin material in production. The very short dwell time of the material to be shredded in the machine also results in low specific energy consumption, low blade wear and ultimately an extremely high throughput. An electronic and load-dependent control system between the rotor and worm shaft prevents overfilling of the grinding chamber and material jams on the screen. As a rule, this enables the machine to start up from a standstill in the event of material residues. The innovative material feed and the rotor design enable a compact and energy-saving design of the granulator. The "CentriCut - super-fast cleaning" makes frequent and fast color changes possible. The integrated suction system enables the fastest possible discharge of the regrind on the one hand and very fast cleaning of the granulator on the other. This is particularly advantageous for frequent color or material changes and also enables even utilization of the system. The grinding chamber can be opened without tools via screen baskets that can be swung out to the side, which also enables a quick screen change, for example when changing the desired grain size. The machines are equipped with a fully integrated safety and noise protection housing

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Working width: 700 mm, Blade shaft diameter: 280 mm, Product length (min.): 2,500 mm, Workpiece diameter (max.): 900 mm, TECHNICAL DETAILS Trunk diameter at the thrust washer: 250 - 700 mm Root base diameter: max. 900 mm Log length: from 2,500 mm to unlimited Cycle time (average Ø of 300 mm without transport time): 20 s Cutterblock Slitter shaft cutting length: 970 mm Cutter shaft diameter: 280 mm Umyu8Txaoh Number of knives per set: 48 pieces MACHINE DETAILS Drive motor for cutter shaft: 45 kW Hydraulic unit: 5.5 kW Gear motor for turning: 2.7 / 5.5 kW EQUIPMENT - Homback reducer - Hydraulic power station - Electrical control cabinet - Centering clamps - Documentation

Condition: ready for operation (used), Year of construction: 1999, Operating hours: 57,276 h, Functionality: fully functional, TECHNICAL DETAILS Distance between uprights: 420 x 420 mm Screw 1 diameter: 30 mm Screw 2 diameter: 22 mm Iswfaam Automation: Yushin robot RB-70SL (2007) Operating hours: 57,276 h

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 38,929 h, Functionality: fully functional, Clamping force: 1,500,000 N, Screw diameter: 40 mm, Injection weight: 184 g, Ejector stroke: 175 mm, Clearance between the columns: 470 mm, TECHNICAL DETAILS Clamping force: 150 t Clamping force / increased force: max. 35 / 350 kN Opening stroke: 500 mm Mold height: 250 mm Daylight of the clamping platen: 750 mm E2Powci Distance between the columns: 470 x 470 mm Mold mounting platens (W x H): 650 x 650 mm Weight of the movable mold half: max. 800 kg Ejector force: max. 40 kN Ejector stroke: 175 mm Injection unit Screw diameter: 40 mm Effective screw length (L/D): 20 Screw stroke: max. 160 mm Injection volume: 201 cm³ Weight of the shot: 184 g Material throughput PS: max. 29 kg/h Material throughput PA6.6: max. 15 kg/h Injection pressure: max. 2,000 bar Injection flow: max. 168 cm³/s Counter and back pressure positive/negative: max. 350 / 160 bar Screw peripheral speed: max. 53 m/min Screw torque: max. 700 Nm Nozzle contact force: max. 70 kN Stroke of the nozzle retraction movement: max. 300 mm Installed cylinder heating power: 4 x 2,200 W Installed nozzle heating power: 600 W Material hopper capacity: 50 l MACHINE DETAILS Operating hours: 38,929 h Dimensions (L x W x H): 4,900 x 1,750 x 2,100 mm Weight: 4,590 kg EQUIPMENT - Core pullers: 1x - Compressed air blower: 1x