Used welding smoke suction for sale (142)

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Lsdszf Hn Aspfx Anusac Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 Lasdpfsttah Ujx Anujc 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Ljdpjzd Twbsfx Anuoac Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173823, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air flow: 580 m³/h Laedpfx Aowq R Dbonusc Max. achievable negative pressure: 37,500 Pa Max. device air flow: 520 m³/h Min. air flow: 100 m³/h The Fumator Minivac 500D is a compact and reliable extraction system that efficiently removes smoke, dust, and fumes from industrial workplaces. Its space-saving design allows for easy integration into various production processes. With its innovative technology, it ensures a clean and safe working environment while remaining pleasantly quiet and low-maintenance during operation.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1010215351, overall weight: 95 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating Temperature Range: 0 – +50°C Lodpfjwq Rvwjx Anueac Operating Voltage: 400V/50Hz Control Voltage: 24V DC Connected Load: 7.5 kW Max. Device Airflow: 750 m3/h Min. Airflow: 150 m3/h Max. Vacuum: 380 mbar The Fumator Minivac 500D is a powerful and reliable extraction system designed to effectively remove smoke, dust, and fumes from industrial work areas. Its compact design enables flexible integration into various production environments, while its efficient technology ensures a clean and safe working atmosphere.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3520173969, overall weight: 87 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Lasdpfx Aowq Rt Aonujc Connected load: 5kW Max. blower air flow rate: 550 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air flow rate: 500 m3/h Min. air flow rate: 100 m3/h The Fumator Minivac 350D is a reliable and efficient extraction system specifically developed for the removal of smoke, dust, and fumes in industrial work environments. Thanks to its compact design, it can be flexibly used in various production sectors.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Ljdpjwq Ryvsfx Anueac Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume: 580 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173824, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air volume flow: 520 m³/h Min. air volume flow: 100 m³/h The Fumator Minivac 500D is a powerful and reliable extraction system designed to efficiently remove smoke, dust, and fumes from industrial work areas. Its compact design allows for flexible use in various production environments. With its advanced technology, it ensures clean and safe air quality while operating quietly and requiring minimal maintenance. Lasdpfjwq Rzgox Anujc

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Lsdpfezdqv Usx Anujac Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: used, Extraction system complete with KEMPER brand extraction arms. Extraction arms are used in areas where work processes generate harmful dusts and fumes that negatively impact the health of workers and other people in the vicinity. Extraction arms are one of the most effective systems for capturing welding fumes, as well as fumes, dusts, or vapors from other manufacturing processes. The set includes: * 4 extraction arms with a wall mount, 160mm in diameter and 2.00m in length * Pipe, diameter 250mm - 8m Ledezdir Depfx Anujac * Pipe, diameter 350mm - 8.5m * 350mm tee fitting * 250mm elbow - 3 pieces

Condition: good (used), Year of construction: 2014, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors -Manufacturer: TEKA, mobile welding fume extraction system type Strongmaster IFA -Drive: 1.1 kW -Volume flow rate: 3000 m³/h Lsdpfx Anezblyweujac -Extraction arm: Ø 160 mm x 4000 mm -Transport dimensions: 950/670/H1365 mm -Weight: 196 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Ledpfx Asdqzbrsnujac Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Lsdpfx Ansdqzcvsujac Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Lodoyq Nygspfx Anusac Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction Laodpfxol Dw U Ds Anujc is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Laedpeib Dadofx Anuec Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), Year of construction: 2017, type of input current: DC, KEMPER Dusty welding smoke extractor + 10 meter suction pipe + exhaust welding gun Holch 350-SC. 3.5 meters Kemper Dusty welding fume hood Suction power - 260 m³/h suction pipe: 10 meters Holch 350-sc 3.5m suction welding gun Filter mode - Cleanable filter Filter cleaning method - Manual Filter surface - approx. 1.35 m² Motor power - 1.6 kW Lajdpomxklhofx Anuec Power supply - 1 x 230 V / 50 Hz Filter type - Filter cartridge Filter material - ePTFE membrane Filter efficiency - > 99.9 % Dust classification - M Basic data Dimensions (W x H x H) - 300 x 300 x 690 mm Weight - 24 kg Rated current - 8.7 A Noise level - 74 dB(A) Further information Fan type - Suction turbine Hose connection - ~45 mm x 2

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. Lajdpfxowcd I Ro Anujc The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. Lasdpfx Aswcdrvsnujc ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Ledpfx Ansx Ht Rvjujac

Condition: excellent (used), Year of construction: 2022, Description *EUROMATE 4300C DUST EXTRACTION UNIT - WELDING/GRINDING FILTRATION - 1.1 kW* *DESCRIPTION* Mobile EUROMATE 4300C dust extraction unit, model 2022. Dutch professional brand specializing in welding fume extraction. Ideal for source capture on MIG/TIG welding stations, grinding, and fine dust. Replaces an extraction arm or complements a workshop. *TECHNICAL SPECIFICATIONS* Feature Detail Brand / Model EUROMATE 4300C Year 2022 Airflow ~1250 m³/h Vacuum ~2000 Pa Power 1.1 kW Power supply 230V Single-phase Filtration Cartridge + metal pre-filter Filter area 20 m² Sound level ~72 dB(A) Dimensions W 700 x D 750 x H 1100 mm approx. Weight ~95 kg *GENERAL CONDITION* Few hours of operation. Main cartridge and pre-filter in place. Wheels and handle: easy handling. *KEY BENEFITS* 1. *230V Single-phase*: Plugs into a standard 16A domestic socket. 3. *Mobile*: Braked wheels, fits through all workshop doors. 4. *EUROMATE*: Professional brand, readily available after-sales service and filters. *INCLUDED* Complete unit with cartridge and pre-filter in place. Without extraction arm, without hose. Standard Ø160 mm outlet. *LOCATION & CONTACT* Available for viewing in the 49 postcode area, 49000. Easy loading by one person: 95 kg on wheels. Lodpfx Anjzaivgousac

Condition: used, Year of construction: 1995, Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Lajdpfx Anezb Dx Ejuec Width: 600 mm Depth: 500 mm Total height: 1300 mm

Condition: used, Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Laodpfxozb Dtve Anuec Total height: 1200 mm Tubing height: 2000 mm

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ Lodpfx Aneu Nv Afsujac mobile over 4 wheels, front braked *

Condition: used, Year of construction: 2001, Technical details: weight of the machine approx.: 65 kg Ljdpfx Ajy Elyaenuoac