Used Dust Extraction System for sale (29,478)

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Fjdpeunh Uvofx Afnepb Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: used, Grinding Dust Extraction Table SAT Type SATp2 Length A: 2100 mm, Length B: 1770 mm Filter area: 17.6 m² Motor: 2.2 kW Weight: 295 kg Fpodpjwixrdjfx Afneb Mobile

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm Fsdpfxjrp Ii Ue Afnopb -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors Fpedpfx Afsx Agpzonjb The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: excellent (used), Dust extraction Walther NOVA 2000 Fpedpfx Afsivta Nonob with 2 extraction arms mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. - Equipped with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. Fpedpsx Rrlmofx Afnsb - Tested on site and in proper working order. - Testing and inspection possible.

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Fpjdpfx Aforfcpmonsb For further information or contact options, please visit our website

Year of construction: 2019, condition: good (used), Cyclon with rotating valve installed, two air intakes. piping main 600mm piping other 300 mm. Turbine with frequency converter 35 Kw. Fpodpfxopwgvxj Afneb

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.6 kW -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm Fpedpfxjca D Edj Afneb -Output connection: 150 x 110 mm -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow Fpjdpfxevzqtxo Afneb a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Fedpfoiyyxcox Afnjpb Very good condition, directly from production!!!

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, input voltage: 380 V, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Fpjdjx Hi Rxepfx Afneb Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 1992, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW Fjdpfxeb Rh U To Afnepb -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Fodjx Hh Iispfx Afnepb Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3257 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Fpsdpox Hi H Hjfx Afnsb Terms of delivery: ex location

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan Fpjdpfx Aeuncwxefnsb -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Condition: new, Year of construction: 2025, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. Fsdeuc Uchjpfx Afnepb The DCV 4500E is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h Fedsb Ilxdjpfx Afnepb -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: new, Year of construction: 2025, The DCV8900E+ professional industrial extraction unit has been designed for the most demanding working environments. It is a high-performance unit designed to remove sawdust, dust and shavings from carpentry machines, guaranteeing continuous extraction performance throughout the production cycle. Thanks to its compact design and high suction power, the central extraction unit is suitable both as a stand-alone unit and as part of a multi-point extraction system. Technical data Motor power S1 7.5 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 8900 m³/h Suction nozzle diameter 300 mm Suction speed 32 m/s Number of filters 45 Filter material Polyester (5 microns) Filter area 20 m² Fodpfxswwq Nde Afnopb Dimensions (L x W x H) 2400 x 1170 x 2240 mm Weight 500 kg Standard equipment 45 polyester filters (5 microns) metal rotor and rotor housing hermetic film containers integrated filter cleaning system

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h Fsdscii N Sepfx Afnopb -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Fpjdpfxoudalwo Afneb Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Fodpohprg Aofx Afnspb -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm -Dimensions: 540/420/H520 mm -Weight: 24 kg

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of the treatment. A certified control cabinet allows the correctness of operation to be monitored at all times. The vacuum fan, 7.5 kW / 8900 m3/h, operates on the turbine principle, and the soundproofed design of the fan enables the noise emitted during operation to be significantly reduced. Very high tightness of the entire intake system, guaranteeing the best air quality inside the plant and, during the heating period, no loss of heat. Version with one exhaust duct and one BIG-BAG! Strengths of the SCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust collector The new TC series of extraction units has a full top casing to absorb noise and vibrations generated during operation and the possibility of warm air return Very high tightness of the entire extraction system, guaranteeing the best indoor air quality and no heat loss during the heating period Powerful and quiet radial fan guaranteeing you a high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the SCVs Trouble-free filter shaking system with automatic operation Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment of the system, at the same time equipped with a mobile trolley system Control cabinet for switching the unit on/off The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA should be used It is not allowed to use this extractor in explosive atmosphere The extraction is not suitable for handling wet material (e.g. wet sawdust) The bottom beam needs to be removed before operating the extraction in order to have free access to the chip boxes Reduction - hot air return extra charge Technical specifications Fjdpfx Aeup Df Tsfnspb Supply voltage 400 V Power 7.5 kW Motor speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 45 pieces Inlet diameter 350 mm Efficiency 8900 m3/h Dimensions 2400 x 1100 x 3600 mm Net weight 540 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg Fedporw A U Ijfx Afnepb

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower Fedpfjb A Siujx Afnjpb -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg