Used welding sets for sale (322)

Year of construction: 2013, condition: excellent (used), From liquidation of business assets: Kjellberg TIG 321 AC/DC Year of manufacture: 2013 Pulsed operation HF ignition Water cooling Cedpfxshp U Rme Agrshd Welding range: 5-320 Amps 320 Amps at 45% duty cycle Complete, with 4-meter torch, ground cable, and pressure regulator Dimensions in mm, approximately: 1100x510x810 --Very well-maintained unit--

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm * Codpfjwtctmjx Agrshd

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 Chjdpfx Agozd Rmgersd - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Chedpfszugnzox Agred Good condition

Condition: used, Technical details: Cedez Dt Tgopfx Agrshd welding current: 500 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. *

Condition: used, Technical details: welding current: 250 A Length: 815 mm Cjdpfjz Dt S Ajx Agrjhd height: 390 mm connected load: 4,0 kVA connected load: 4,0 kW open-circuit voltage: 16 - 32 V machine weight approx.: 104 kg

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Csdpfxew Rm Sas Agrjhd Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Year of construction: 2004, functionality: fully functional, Friction welding machine RS125, max. upsetting force up to 190 tons, KUKA friction welding machine Modernized by the manufacturer KUKA, 2016. This machine is currently undergoing a complete overhaul in our workshop. The machine bed has been extended to allow welding of components up to 6 m in length, with automatic stop adjustment. Boring bar tubes with a diameter of 178 mm are included. Equipment: servo-hydraulics, facing unit, steady rest, 2/3 jaw chuck, "positioned welding" possible, e.g., for propeller shafts. Currently, the friction welding machine is being used in our production for the manufacturing of hydraulic piston rods, aluminum-brass connections, the production of small and large screw taps, and the production of pressure rollers, etc. Chedpfxeq Aurve Agrsd You are welcome to inspect this machine.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Technical data: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable Cedpfx Ajv Hzq Sjgrjhd - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Chodpjx Hi I Dsfx Agrjd -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: refurbished (used), Stable arc – for DC and AC. The V 27 is available in all power versions as a DC and AC/DC model. The V 27 is fundamentally characterized by a very stable arc. When welding with AC, the current waveform is optimized for both excellent cleaning of the aluminum oxide layer and reduced noise. Additionally, the AC/DC version features an arc spot function. Thanks to the rectangular current waveform, the V 27 excels with increased power and maximum arc stability when welding aluminum. Robust and safe: the V 27 housing. The high-end technology inside the V 27 is protected by a robust industrial housing made of metal – ideal for outdoor use. In addition, the fully load-bearing handles allow the power source to be suspended from a crane and also serve as a holder for the hose pack. The double gas cylinder securing system ensures a maximum level of safety in the production environment. Pulsing and fast pulsing up to 20 kHz. The integrated pulsing and fast pulsing function up to 20 kHz is particularly well suited for processing thin sheet metal. It also enables excellent weld pool control and guarantees perfect results – even with difficult welding tasks. Energy efficiency at full performance. The integrated standby function ensures the automatic switching on and off of individual components. Thermocontrol sensors monitor the temperature of the system and control the fan as needed. This reduces fan noise and dust levels inside the machine and also saves energy. Optimal parameters with SmartBase. Thanks to SmartBase technology, the arc is always perfectly matched to the electrode you have selected. Welding parameters, arc starting, and working range are automatically adjusted to the ideal settings. For optimal freedom, you can fine-tune the arc individually. This guarantees that you weld with the optimal arc for your needs. Technical data TIG welding Welding range 3~ 400 V:[A] 3 - 270 TIG duty cycle AC 400 V Duty cycle AC 100% (40°c):[A] 250 Duty cycle AC 60% (40°c):[A] 270 Duty cycle AC max. welding current (40°c):[%] 60 TIG duty cycle DC 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 270 Duty cycle DC max. welding current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 220 Weldable electrodes:[Ø in mm] 1.5 - 4 Electrode duty cycle Duty cycle max. welding current (40°c):[%] 80 Process-independent data Open-circuit voltage:[V] 43 - 96 Power supply 400 V Power supply voltage 3~ (50/60 Hz):[V] 400 Power supply fuse 3~ (50/60 Hz):[A] 16 Positive power supply tolerance 3~ (50/60 Hz):[%] 15 Negative power supply tolerance 3~ (50/60 Hz):[%] 15 Power plug Codpfozibw Tex Agrehd Power plug: CEE 16 Standards and approvals Protection class: IP23S Insulation class: F Standard/Norm: EN 60974-01 Labeling/Certification: CE, S Cooling type Cooling type: Gas-cooled, Water-cooled Cooling Standard cooling capacity (l/min):[kW] 1.1 Tank capacity:[l] 4.3 Dimensions Dimensions (LxWxH):[mm] 1.130 × 450 × 815 Weights Weight:[kg] 92 Weight water cooling (filled):[kg] 14.7

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Chodpfev N Hkcex Agred Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter Chsdpfxsp Am T Uj Agred - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Cedpfx Agjrfuc Horohd Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), machine/vehicle number: Nr. 94/1223. Nr. 94/1222, Ess pusher unit for transformer sheets I 30-150 Cjdpoylp Utjfx Agrshd Ess pusher unit for transformer sheets E 30-84

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system Chodpfx Agsqvp Nkorod -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V Chjdpfxswf Rgro Agred --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case Codpfxjvm U R Ej Agrjhd -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc.

Condition: used, Technical details: Length: 1120 mm height: 1480 mm power consumption: 500 A capacity at 100% ED: 390 A Chodpowqpl Dofx Agred capacity: 23 KVA welding current: 390 V weight of the machine approx.: 234 kg dimensions of machine: 1,12 x 0,58 x 1,48 m capacity: 23 kVA Hose package with welding gun Ground cable *

Condition: used, Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft-soldering unit, copper band welding unit), consisting of a main machine and control system, "PLC control, touchscreen operation". Process Description The workpiece carrier moves into the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. Codpfx Agsg Icfpjrjhd The loading gripper takes over the armature and inserts it into the welding fixture. The welding fixture moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process begins. This process is repeated until the armature is completely welded. The welding fixture moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the belt system; I0 armatures are conveyed to the removal belt. Technical Data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Inlet 4 bar, 15-23 °C approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Cedpfx Ajz I Dgxogrohd Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 128 kg dimensions L x W x H: 1,2 x 0,8 x1,2 m Chsdpfxevz Abhs Agrjd Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 4.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 4.7 m Wire feed: 4 roller drive with wire Ø for 1.0/1.2 mm *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Codpfxju U Iixo Agrjhd Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg Cedpfxevz Advo Agrehd dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: excellent (used), For sale: Rowatec Genesis 160 welding machine. Csdpfez Sk Elsx Agrehd