Used welding sets for sale (323)

Condition: good (used), Year of construction: 2010, total height: 765 mm, total width: 765 mm, total length: 2,790 mm, overall weight: 3,000 kg, set 1 (5 x in stock)  Driven Master unit CD-30 set 1 (5 x in stock) Idler Slave unit CI-30  Csdpfx Abozw Hnmeajhd Load capacity drive 15 ton Load capacity idler 15 ton Turning capacity combi 45 ton turning speed 130 - 1300 mm/Min Wheel size diameter 520 mm Wheel size width 176 mm Load capacity per section:15T Vessel range Minimum: 466 Vessel range Maximum: 6300Ø Variable rotation: yesRpm No of wheels per section:2+2 Wheel dimensions: 570 x 176Ø x mm Number of matching pieces:5 Length: 2790mm Width: 765mm Height: 765mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m Codpfeu Nwhiox Abashd 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. *

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 24 months, type of cooling: air, DGUV certified until: 10/2027, welding current (max.): 300 A, input frequency: 50 Hz, Equipment: type plate available, OTC Daihen welding machine CPTX-I 3000, 300 amps, 4-roller drive, complete with 4m welding torch, ground cable, pressure regulator, and accessories. Csdez H Uz Rjpfx Abaehd

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,210 mm, total width: 430 mm, total length: 1,200 mm, overall weight: 133 kg, type of cooling: water, electrical fuse: 32 A, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 360 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: documentation/manual, Are you looking for a high-end MIG/MAG pulsed system for demanding industrial applications? The Merkle HighPULSE touch 400 DW combines state-of-the-art inverter and pulse-arc technology with intuitive touch operation, high power reserves, and a water-cooled system – ideal for steel, stainless steel, and aluminum in series and quality production. ✓ Pulse-Arc technology up to 400 A Cedoy U D E Tjpfx Abaehd Controlled droplet transfer, less spatter, and reproducible seams – even with demanding materials. ✓ Intuitive touch operation: Fast parameter setting, saved jobs, and clear process guidance for efficient workflows. ✓ DW design with water cooling. High duty cycle and process stability under continuous load – ideal for industrial welding tasks. Areas of application: ✓ Series production in mechanical and plant engineering ✓ Aluminum, stainless steel, and steel structures ✓ Automated and manual welding workstations Scope of delivery: HighPULSE touch 400 DW power source, integrated double wire feeder, water cooling unit, water-cooled MIG/MAG torch, ground cable with clamp, 3×400 V power cable, operating instructions, etc. Special accessories: DeepArc ColdMIG HighUP Interpulse Automated Connector, 6-pin

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Chedpfx Abswbilloasd ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Chedpfxszwfpps Abajd Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Chedpoz Sk Hvofx Abaod Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: used, Year of construction: 2017, functionality: fully functional, The Jaeckel model T6 FGR K1 turning device is a versatile and reliable solution for the efficient reshaping and processing of workpieces. It is characterized by its precise control and robust construction, ensuring high accuracy and durability. The device can be easily integrated into existing production processes and allows for quick retooling as well as flexible applications. Chodpfx Aowrdt Sjbasd

Condition: ready for operation (used), Rehm Tiger 210 DC Welding Machine Manufacturer: REHM Model: TIGER 210 DC Chjdezy Eqlepfx Abajd Welding processes: WIG DC / MMA Welding current WIG: 3–210 A Welding current MMA: 3–170 A WIG 100% duty cycle: 175 A (20 °C) WIG 100% duty cycle: 140 A (40 °C) MMA 100% duty cycle: 160 A (20 °C) MMA 100% duty cycle: 120 A (40 °C) Mains voltage: 230 V / 50 Hz You are welcome to visit us for a viewing. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Cjdozgaazopfx Abaohd Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Area requirement: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, functionality: fully functional, Complete Orbital Welding System: OWC Plus Controller + Inverter T 180 + CWH 53 Weld Head Description: For sale is a high-quality, complete orbital welding system from Orbitalservice GmbH. The package includes the control unit, power source, cooling system, and a closed weld head with accessories. Ideal for precise tube welding applications. German-made quality. Components included in the package: 1. Controller & Inverter: - OWC Plus Orbital Welding Controller: Modern control unit (weight: 2.5 kg). - Inverter T 180 Basic Plus - DC: Powerful power source (3 A - 180 A), weight: 12.2 kg. - Mains cable: Connection between power source and controller (80 cm). 2. Cooling: - Water cooling unit WUK 7 Plus: 230 V version, includes two self-sealing couplings (weight: 16.2 kg). 3. Welding head & accessories: - Closed weld head CWH 53: For tube outside diameters (OD) from 6 mm to 53 mm. Includes drive unit and 8 m hose package. - Collet set: Spring-loaded set for CWH 53 (OD 19.0 mm), consists of 4 half-shells made from high-strength aluminium. 4. Other accessories: - Remote cable control RC Plus+: 8 m cable length, suitable for AVC-OSC. Codpfeyg R Svsx Abaehd - Argon pressure regulator: 3-way, chrome-plated brass. - Gas hose: 3 m, for OWC Plus control unit. Technical details: Manufacturer: Orbitalservice GmbH / Made in Germany. Original list price: approx. €15,900 (before discounts as per quotation). Condition: [Please insert current condition here; e.g.: "The system is from 2018, has seen little use and is fully functional."] Price: €6,500 plus VAT Location: PL 2 units available. Scope of delivery: Complete system as described above. More pictures available on request. Can be picked up in Poland or shipped via forwarding agent.

Condition: new, functionality: fully functional, input voltage: 400 V, type of cooling: air, welding current (min.): 30 A, welding current (max.): 400 A, input frequency: 50 Hz, iROB 401 AC/DC – MIG/MAG welding power source, new unit from stock, original packaging The iROB MIG/MAG welding power source from Abicor Binzel offers the following process options as an automation solution: • mX Standard for all base materials – the standard DC process without pulse, • mX Pulse – pulsed welding process for different penetration profiles, • mX Move DC – for TIG weld appearance / aluminum, as well as other functions. * MIG/MAG welding power source for robot applications * Welding current: 30–400 A * Processes: DC, Pulse, Move DC and others * Air-cooled * 3 × 400 V, 50/60 Hz * Fieldbus interface, e.g. EtherNet/IP * Connections for control cable, torch and MPP * Dimensions: 395 × 710 × 760 mm * Weight: 83 kg * Manufacturer: ABICOR BINZEL, Germany * Multiple units available * Accessories such as cooling unit, WiFi router, trolley and base are available as options * Extensive accessories (including torches) and other automation components are available. Please do not hesitate to inquire. Csdpe Afdriofx Abaehd Delivery/shipping possible at extra cost. Image shows a similar product image, including optional accessories (trolley).

Condition: used, Year of construction: 1997, functionality: fully functional, System consisting of: Welding robot Romat 310, ROTROL 32 TM controller and programming handset with cable, connecting cable for robot control cabinet Pedestal for robot Tactile sensor, arc seam tracking Drive for Micro SD card for program backup incl. 2 cards Quinto 503 welding machine, wire feeder Welding torch MRW 380, torch hose package Duo drive wire feed unit, torch testing gauge 15 kg wire spool holder, drum equipment Mechanical cleaning, pressure booster 2-station rotary table 4 DP 2200 (load capacity 220 kg per station) 5 m connecting cable to control cabinet Csdsyh Hl Sepfx Abaohd 1 light barrier 1 pre-selection start Wiring diagrams Documentation, functional warranty Delivery date: immediately available

Condition: used, Technical details: welding current: 350 A Length: 690 mm height: 870 mm Cedez Ep Naspfx Abaohd connection voltage: 400 V connected load: 15,7 kVA open-circuit voltage: 70 V machine weight approx.: 75 kg

Condition: new, Year of construction: 2026, functionality: limited functionality, type of input current: three-phase, total height: 1,100 mm, total width: 650 mm, total length: 1,000 mm, overall weight: 230 kg, warranty duration: 24 months, type of cooling: water, product height (max.): 8 mm, laser power: 3,000 W, Glorystar Laser ALL NEW GW-H Series Handheld Laser Welding Machine 1000-3000W GW-H series is a handheld laser welding machine that can be used for welding various metal sheets and tubes. It features fiber laser with 1000-3000W laser power options, capable of cutting stainless steel, carbon steel, aluminum, brass and other metals up to 8mm thick. The machine includes: In good condition, with all manuals and accessories. Chsdpfouc S A Eex Abasd Available with single or dual wire feeder options MAXPhotonics / Raycus laser source The welding gun features 4 mode functions: welding, weld seam cleaning, cleaning, cutting Integrated cooling system Touch control panel 24-month warranty 4 working modes:Welding，Weld seam cleaning，Cutting，Cleaning Welding head weight: 1kg Cooling method: Water cooling Shielding gas: Nitrogen or Argon Applicable materials: Stainless steel, aluminum, copper, steel, brazing, etc.

Condition: excellent (used), Rowatec MM 33 - Transformer welding machine - Transformer with thick copper winding - Power: 330A - 60%, 250A - 100% - Voltage range: 15.8V - 33V - Current protection: 22A, 400V - Stepped voltage adjustment (10 fine adjustment positions, 2 coarse adjustment positions) - Smooth wire feed adjustment Chsdpez Sb Ukjfx Abaed - 4-roller wire feeder - Welding modes: 2-stroke, 2-stroke spot welding, 2-stroke timed welding, 4-stroke, 4-stroke spot welding, 4-stroke timed welding - Smooth adjustment of pause duration and welding duration - Wire retraction time after welding

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost Cedsyaw Ecjpfx Abajhd compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!

Condition: new, Year of construction: 2026, Laser Handheld Welding Machine – Welding – Cutting – Cleaning Compact, Flexible, Easy to Use • 2kW unit for welding up to 6mm steel, 5mm stainless steel, 4mm aluminum. • All our welding units feature water cooling • Industrial-grade machines for continuous operation. • Dual-wire feeder for use with up to 2 x 15 kg flux-cored wire reels, which can be operated simultaneously or individually. When both wire reels are activated, double the amount of wire is fed, allowing for the welding of very large seams. • Includes laser safety glasses, replacement nozzles, and protective lenses -TECHNICAL DATA -Model: Revobotics 2KW LASER -Torch package length: 10m -Laser power: 2000W -Total weight: 160kg -Safety: Contact clamp Csdpfxszzktns Abaohd -Wire feeder: Ø0.8, 1.0, 1.2, 1.6, 2.0, 2.5mm (dual-wire version) -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Power supply: 32A CEE -Dimensions (L x W x H): 1000mm x 410mm x 710mm -Water cooling: Yes

Condition: used, total power requirement:6,5 kW Cheds Ad Siyopfx Abajd dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Condition: like new (used), New industrial welding machine WELDKAR Multi-GMAW 400S DP Multi-GMAW 400S DP Chsdpfx Abexf Nvijasd Features: TIG HF, LIFT TIG, MMA, MIG Double-pulse MIG Synergic operation Input voltage: 3-phase AC 400 V ± 10% Selectable water/air cooling IGBT module High duty cycle MCU control system Enhanced protection Tested at 550 V Generator-friendly Power supply: 3-phase Duty cycle: 60% at 400 A / 100% at 310 A Enables activation of dedicated pulse curves for aluminium, mild steel, and CuSi3 Waveform control for additional arc stability, even at low currents Digital control of all welding parameters Generator-friendly design allows cooperation with diesel generators, preventing failures caused by voltage spikes Protections include phase loss, overheating, overvoltage, undervoltage, and overcurrent NET PRICE: 10,000 GROSS PRICE: 12,300

Condition: ready for operation (used), EWM Integral MIG 450 DW P Pulse Welding Machine Technical data see image no. 2 Cjdeyh Enrjpfx Abajhd You are welcome to come for an inspection. We can organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. Chjdpfoyh Az Asx Abasd We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: used, machine/vehicle number: 0000622128, EWM Titan XQ 400 puls DW Compact, used Model: Titan XQ 400 puls EMC class: A Codpsyngdwefx Abashd Minimum welding current (A): 5 Maximum welding current (A): 400 Duty cycle at 40°C: 400 A / 80%, 370 A / 100% Open-circuit voltage: 82 V Mains voltage: 3 x 400 V Voltage tolerance: -25% to +20% Recommended generator power: 23.8 kVA Mains frequency: 50 Hz / 60 Hz Cooling capacity: At 1 l/min: 1000 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 Dimensions: 1150 mm x 678 mm x 972 mm Multi-process pulse MIG/MAG welder with all welding characteristics and processes, non-compact, non-modular Drive XQ and Drive XQ HP wire feeders Swivel console for wire feeder "blueCool" coolant down to -10°C (14°F), 5 l, 5 l Interconnection cable set, water-cooled, 14-pin, 1.8 m Adapter for B300 basket spool MIG/MAG function torch, with OLED graphic display, water-cooled, X-technology, 4 m Ground cable with screw clamp, 450 A / 60%, 70 mm² Pressure regulator with manometer, 30 l Mains plug, installed

Condition: new, functionality: fully functional, input voltage: 400 V, welding current (min.): 40 A, welding current (max.): 400 A, input frequency: 50 Hz, iMIG POWER 400 – Welding power source, new unit from stock, original packaging Suitable for: • MIG/MAG welding • Electrode welding (MMA) • TIG welding The power source is suitable for both professional manual operation and as a component of automated welding systems. Technical data: • Welding current: 40–400 A • Mains connection: 3 × 400 V ±10 %, 50/60 Hz • Full load current: 25 A • Max. power consumption: 17 kVA • Mains fuse: 32 A slow-blow • Working voltage: 16–34 V • Cooling type: F • Dimensions (L × W × H): 720 × 550 × 830 mm • Weight: approx. 48 kg including trolley * Manufacturer: ABICOR BINZEL, Germany * Several units available Wire feed unit, cooling unit, and other options are also available upon request. Please feel free to inquire. Delivery/shipping possible at additional cost. Codpfx Ae Afd Hgsbajhd Image shows a similar product image including optional accessories (here: wire feed unit).

Condition: like new (used), The MULTIMIG F SYN series welding machines feature state-of-the-art technology. Instead of the conventional 50 Hz frequency used in transformers, these welders operate at frequencies ranging from 20 kHz to 50 kHz. This provides the equipment with excellent dynamic response, portability, compact size, low weight, reduced energy consumption, and more. The MULTIMIG F SYN welding machines are suitable for welding various materials such as stainless steel, carbon steel, alloyed steel, etc. Therefore, they can be used in general metalworking industries, machinery and equipment repair, construction, production and repair of installations in the petrochemical industry, DIY workshops, and more. Features of the MULTIMIG F SYN series welders: - Digital control system with accurate welding parameter display Chjdpfxexfln Ue Abaed - High-performance multifunctional power source (MIG/MAG) - Dynamic control and stable welding parameters - IGBT technology for low energy consumption - Rated duty cycle: MULTIMIG 500F SYN = 500A at 60% (40°C) Specification: - Input voltage (V): 3~380/400/440±10% - Frequency (Hz): 50/60 - Input current (A): MIG 43; TIG 32; MMA 43 - Output power (kW): MIG 23; TIG 18; MMA 23 - Welding current (A): 40-500 (MIG) - Welding voltage (V): 10-50 (MIG) - Open circuit voltage (V): 63 - Duty cycle (40°C): 60% at 500A, 100% at 400A - Wire diameter (mm): Fe: 0.6/0.9/1.0/1.2/1.6; SS: 0.8/0.9/1.0/1.2/1.6; Flux-cored: 0.6/0.8/0.9/1.0/1.2/1.6 - Protection class: IP23 - Insulation class: H - Dimensions (mm): 605x240x445 - Weight (kg): 31.5 - Power factor: 0.7 Includes cooler, trolley, torch, and ground cable. Set includes: 500F SYN power source, cooler, trolley, power supply box, MB 500 4m water-cooled torch, and ground cable. Net price: 9,500 Gross price: 11,685