Condition: used, Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Welding current continuously adjustable: 5 - 250 A Isdewvgg Nspfx Ahvshw Electrical connection: 380 V Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: used, Year of construction: 2006, suction capacity: 10,300 m³/h, negative pressure: 4,400 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing the risk of explosion. Specifications: Max. airflow: 10,300 m³/h Max. negative pressure: 4,400 Pa Filtration surface area: 126 m² Cartridge filter elements: 6 pcs Motor power: 7.5 kW Inlet diameter: 315 mm Unit dimensions: Height: 3.70 m Width: 2.00 m x 1.35 m Base: 1.45 m x 1.02 m Stock number: 1095 Ihedsx Hxycepfx Ahvjw

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Coil dispenser for wire Lincoln Idealarc DC-600 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 600 Amps at 100%. Welding equipment: Idealarc DC600 220/380/440 3/50/60 Input voltage: 220/380/440V Input current: 116/67/58A Input Hertz: 50/60 Input phase: 3 Input power: 220/380/440V/3/50/60 Iedeu Afwljpfx Ahvjhw Output range: CV:70A/13V - 780A/44V DC:90A/24V - 780A/44V Rated output: 600A/44V/100%. 680A/44V/60%.

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Ihsdjlffdyepfx Ahvjw Power: Three-phase 380V They have manual and Ce.

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Ihedpfohzbi Nox Ahvjw Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Ijdpfxsuf Nm Ho Ahvjhw Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Iedpfxou Afttj Ahvohw Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Ihodexf Hv Hspfx Ahvjw Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Ihjdpeuf A Ahofx Ahvjw Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Ihjdpfx Ahsuf Nu Revjw Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 300 kg, rotary table diameter: 600 mm, Capacity: 300 kg Max. height center of gravity: 200mm Max. eccentricity center gravity: 150mm Table diameter: 600 mm Motor power: 0,37kw Table tilting: Manual, by handwheel Rotation speed: 0,1 - 1,0 rpm Manual operation: By foot pedal (right and left hand rotation) Ihsdpfx Aouf Nk Ejhvjw Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-90 Drive: Danfoss Electrical components: Schneider

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Ihodpfx Ahjwlrukovow Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Year of construction: 2002, condition: refurbished (used), flame cutting gantry Brand: SATO Iedpfx Aehzbi Tohvjhw Model: SATRONIK HD 8000 8 Oxyfuel torches (2 TRIPLEX torches) SATO control with gas console. Year 2000 Useful cutting capacity: 6,000x24,000mm

Condition: new, load capacity: 100 kg, rotary table diameter: 400 mm, Capacity: 100kg Max. height center of gravity: 150mm Max. eccentricity. center of gravity: 100mm Table diameter: 400mm Motor power: 0,2kw Table tilt: Manual, by handwheel Rotation speed: 0.4 - 4.0 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0 - 90 Isdpfxsuf Niuo Ahvshw Inverter: Danfoss Electrical components: Schneider

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Ihodeyupl Dopfx Ahvow Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Iedpfoyupkyox Ahvehw Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Iodpfx Ajyuph Eohvohw Hand remote control and foot pedal

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Ihsdpfoyupgzsx Ahvow Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) Ijdjyupd Hopfx Ahvohw - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: ready for operation (used), Type: DS 6001.20P De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) Iodoyuk Sxspfx Ahvehw - Maximale plaatgrootte: 6000 x 2000 mm - materiaaldikte: 3 30 mm - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, input voltage: 400 V, hose package length: 22,800 mm, ground cable length: 5,000 mm, sheet thickness steel (max.): 50 mm, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm, featuring automated process setup via advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable that provides trackable usage data. Iedpfxoykp R So Ahvjhw Technical data: Cutting performance: Recommended cutting capacity: 32 mm – 500 mm/min Maximum cutting capacity: 38 mm – 250 mm/min Severance capacity: 50 mm – 125 mm/min Pierce capacity: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm D x 6.0 mm W Scope of delivery: Power cable, H105 handheld torch 22.8 m (75°), work lead with clamp, instruction manual

Condition: as good as new (ex-display), warranty duration: 12 months, type of cooling: water, hose package length: 8,000 mm, electrical fuse: 32 A, DGUV certified until: 02/2027, sheet thickness aluminum (max.): 10 mm, Primary switched-mode power source, welding characteristics of absolute top class, fully digital process control, CAN bus system, digital high-frequency ignition device with process-controlled ignition sequence, parameter database, Tiptronic for saving and recalling 100 jobs, demand-controlled cooling circuit, liquid-cooled torch, user dialogue with plain text display. Technical data: Mains voltage: 400 Volt; Fuse protection: 16 A slow-blow; Adjustment range: 3 - 300 Amps; Open-circuit voltage: 10 - 60 V; AC frequency: 30 - 20 Hz; AC balance: 10 - 90%. Welding current DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle, same for AC-DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle; Welding current DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle, same for AC-DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle. Power factor: 0.99. Protection class: IP 23 EN 60529 / IP 23. Cooling type: F. Weight: approx. 108 kg. Scope of delivery: Torch cable and user manual. Ihodpfx Ahsyhpldjvow

Condition: reconditioned (used), input voltage: 400 V, ground cable length: 5,000 mm, warranty duration: 6 months, type of cooling: water, hose package length: 8,000 mm, electrical fuse: 32 A, DGUV certified until: 03/2027, welding current (max.): 300 A, Equipment: type plate available, Water-cooled TIG welding machine with inverter technology, suitable for both direct current (DC) and alternating current (AC) welding applications. It offers features for precise welding results on a wide range of metals, including aluminum. IP23 rated; 300 amps duty cycle at 55%, and 100% at 230 amps. Scope of delivery: gas regulator, hose package. Workshop-tested used machine. Ihsdsyitdtepfx Ahvjw

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available Iedpfxsh N Sd Ue Ahvohw - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Condition: new, Year of construction: 2025, functionality: fully functional, arm reach: 1,000 mm, User-friendly operation – fast programming without prior robot experience Iedpfxox Dk Sio Ahvshw Hand-guided “drag” function: The CRP welding cobot can be easily moved by hand to the welding point. You simply guide the arm into the desired position, without complex controls or programming. Unique end-effector with joystick: The integrated rocker allows you to move the welding torch in six directions (X/Y/Z + rotations) for precise or fast positioning directly at the weld point. Rotation range: maximum –360° to +360° Maximum rotational speed: up to 250°/sec for rapid movements between welding positions Automatic point registration: With the push of a button, position, movement mode, and welding parameters are saved. This lets you create a welding program in just a few minutes. Complete welding package – plug & play solution Includes welding table for positioning and clamping your workpieces. Includes 350 A Megmeet MIG/MAG semi-automatic welder with pulse function and welding torch. Result: fast commissioning, reduced programming time, and a cobot installation that any welder can operate—even without industrial robot experience.