Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Bwodpfjz S Egiox Aknew Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Bwodpe Aaw U Tofx Aknow

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 387818, operating pressure: 4,000 bar, Mechanical part and the pump in working order, electric box partially defective. Buyer is responsible for de-installation and transport. Bwjde Ahd Tlepfx Aknsw

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Bwsdpfxszizkys Aknjw Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1872509, overall weight: 1,000 kg, We offer a well-maintained high-pressure water pump UHDE HP 19/15-S. Year of manufacture 2007. Condition is as new. Bjdps Ahw Erefx Aknsww

Condition: used, functionality: fully functional, SAF Plasmatome 20 with Digisaf 100 control system. Bwedpo Ahw Dusfx Aknsw The machine is suitable for plasma cutting of sheet metal and is in used condition. The system is equipped with a CNC Digisaf 100 control system. Inspection and testing are possible by appointment. Sale as shown in the photos.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Bwedpfs Ahw Upjx Aknjw Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Operating instructions and electrical diagrams are available Working stroke triggered by pneumatic foot pedal Well-maintained condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 830 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,221 kg, For sale is a Siegmund welding table system 22. Length x width = 3000 mm x 1500 mm. Bwjdpfs Ahhvvjx Aknow The table was purchased new by us in 2021 and has always performed well. Bore diameter = 22 mm, bore spacing = 100 mm. According to the list, the table includes numerous accessories and can be upgraded with additional purchases for various welding applications. • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Bedpfs Adzppex Aknoww Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Machine No.: A0320A0086 The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 43 h, machine/vehicle number: PR4-3000-0719-0385, control type: CNC control, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Bwjdpfxe Ahikqs Aknow Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: good (used), Year of construction: 2016, Welding fume extraction system F-84, manufactured in 2016, for sale! A welding fume extraction system, type F-84, manufactured in 2016, is for sale. The system is sold with a comprehensive range of accessories. Included in the scope of delivery: Bedpfs Ahq E Iex Akneww * Various exhaust pipes * Several extraction arms * Other accessories The system is ideally suited for use in workshops and industrial facilities. If you are interested or have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Bwsdpfx Ajz Eu Syeknsw Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Condition: used, Year of construction: 2013, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Bjdpfx Ake Ahx Stjnoww Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source with automatic gas console and Contour Cut Extraction table 41126ä

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 Bodpfx Ake Af Uvysneww This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Bedpfx Aj Ahm Iisknsww The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total width: 3,500 mm, total length: 8,000 mm, overall weight: 5,000 kg, input current: 16 A, FOR SALE: WellCut LC3500 CNC Oxy-Fuel Cutting Machine For sale: a Finnish-built WellCut LC3500 gantry oxy-fuel cutting machine, with a 3.5 m rail gauge and a 3,000 mm single-torch cutting width. Heavy-duty LC frame, designed for thick plate and multi-torch oxy-fuel applications. Burny CNC control with four independently switchable torch stations. Extendable, precision-machined rack-and-rail track. Manufactured by Airwell Oy, Sastamala, Finland, ensuring local availability of parts and service expertise. See the machine in operation before purchase; inspections are welcome. MACHINE OVERVIEW The WellCut LC is the heavy-duty model in Airwell’s WellCut series. It features a taller frame than the FL model, which keeps the gantry and electronics further away from the cutting heat. The LC can accommodate several oxy-fuel torch carriages simultaneously, enabling the cutting of multiple identical parts from thick steel plate in a single pass. This makes it suitable for steel service centers, fabrication shops, and heavy-plate manufacturers. The "3500" designation refers to the 3.5 m rail gauge. Bodpfxs Af Nnde Aknsww TECHNICAL SPECIFICATIONS Manufacturer: Airwell Oy, Finland Model: WellCut LC3500 Year of manufacture: [to be confirmed] Cutting process: Oxy-fuel (flame cutting) Rail gauge: 3,500 mm Cutting width, one torch: 3,000 mm Overall machine width: 3,900 mm Machine height: 1,800–2,100 mm Gantry body length: 1,280 mm Rail length / cutting length: [to be confirmed] m Torch stations: 2 (independently switchable) CNC control: Burny Drives: Omron AC servo motors, Alpha gearboxes Drive rail: Precision-machined rail with rack, mounted on a base beam Cutting table / extraction: CONTROL SYSTEM AND DRIVES The machine is operated by a Burny NC control system from Lincoln Electric, an industry-standard controller for oxy-fuel shape cutting. Panel controls for Go To, Reverse, Go, and Stop, plus a jog pad for manual positioning. Per-station Auto / Manual / Off switching for torches 1-2. Electric gas control from the panel, with manual adjustment as a backup. Panel functions for ignition, preheat, pierce time, and speed. Omron AC servo motors and Alpha precision gearboxes drive the gantry along a precision-machined rack. This ensures accurate and repeatable motion along the entire rail length. FEATURES AND EQUIPMENT Four torch stations for multi-torch oxy-fuel production. Tall LC frame for cutting hot, heavy plates. Precision-machined rack-and-rail drive track, extendable if longer plates are required. Protective covers over the rail and cable chain. Energy chain for hoses and cables along the rail. Torch height control, collision protection.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Bwsdpfx Akjx Ap A Ronow Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Bwsdpfx Akjx H Ny Tensw

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Bodpfx Akjzn Uk Dsneww Dimensions: approximately 4 x 2.5 x 3 m.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Bsdpfxe Afwzwe Akneww Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free Bsdpfe Ahqruox Aknsww • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder • Plate detection: Ohmic touch sensing • Plate alignment: Manual Additional equipment • Note: Dust extraction unit is excluded

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,500 mm, overall weight: 1,000 kg, table length: 3,000 mm, workpiece weight (max.): 4,000 kg, borehole diameter: 28 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table plate thickness: 15 mm Workpiece weight: max. 4,000 kg Bore diameter: 28 mm Bwedo Af Hdnspfx Aknjw MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,000 mm Empty weight: 1,000 kg Number of transport packages: 1 Included accessories: 4× 3D angle brackets, 300 mm (2× left, 2× right) 6× flat stops, 150 mm 6× flat stops, 225 mm 1× protractor 2× V-blocks 1× eccentric stop 1× flat angle bracket 12× clamping screws 12× quick clamps

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley Bsdpfxe Ahm Sqs Aknjww

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: Bwjdpeyxvwijfx Aknew • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: used, Year of construction: 2002, Technical details: table load: 20 t table diameter: 1500 mm Total power requirement: 12 kW Bwjdpe Ahwr Esfx Aknsw table rotating: 360 continouss Grad table - inclinable: -30 - 100 Grad swival range +/-: 130 Grad height of the swivelling axis: 1005 mm machine weight approx.: 3,7 kg rotary table revolutions per minute : Infinitely variable, hydraulically controlled drive Torque: 15.000 Nm dimensions LxWxH: 2,8 x 1,6 x 1,2 m