Used waterjet cutting machines for sale (38)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 400873, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,500 mm, pump power: 2,200 W, sheet thickness steel (max.): 120 mm, The machine was overhauled in 2026 and is serviced every 500 operating hours! TECHNICAL DETAILS Working area, X-axis: 1,500 mm Working area, Y-axis: 1,500 mm Cutting capacity, steel: 120 mm (recommended: 60 - 80 mm) Itodsy Nmtvopfx Abxeg Cutting capacity, aluminum: 120 - 200 mm Cutting capacity, plastic, stone, etc.: unknown MACHINE DETAILS Pump power: 22 kW (30 HP) Last pump overhaul: 3 operating hours ago Machine dimensions (L x W x H): 2,500 x 1,900 x 1,500 mm EQUIPMENT Spare parts Computer Water softening system

Condition: ready for operation (used), functionality: fully functional, travel distance Z-axis: 203 mm, working length: 3,200 mm, working width: 1,575 mm, The technical data is based on manufacturer specifications. The seller assumes no liability for this information! Iedpfxjy Slqxo Abxetg TECHNICAL DETAILS Working area X-axis: 3,200 mm Working area Y-axis: 1,575 mm Z-axis travel: 203 mm Table size: 3,658 x 1,956 mm Maximum material load: 1,950 kg/m² Speed: 4,572 mm/min MACHINE DETAILS Electrical connection: 3-phase, 380–480 V AC ±10% Frequency: 50–60 Hz Linear positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Ballbar circularity accuracy: ±0.064 mm Dimensions and Weight Installation area with control unit: 5,715 x 2,794 mm Weight, tank empty: 2,812 kg Height with scissors high-pressure piping: 2,921 mm Operating weight: 10,545 kg

Condition: used, Year of construction: 2014, functionality: unexamined, STM Waterjet PremiumCut 2060 5 Heads for pure water cutting Cutting Area 6000x2000 mm (Double Table System) Itedpfsy Ncnisx Abxog BFT High Pressure Pumpe Hytron 40.37

Condition: used, Year of construction: 2014, functionality: unexamined, STM Waterjet PremiumCut 6015 Isdpfxjy Ixgls Abxjtg 5 Heads for pure water cutting Cutting Area 6000x1500 mm (Double Table System) BFT High Pressure Pumpe Hytron 40.37 (60.000 hours needs to be overhauled)

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet Itodpfxoxgua Ae Abxeg 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar Ijdsxgumcepfx Abxjtg

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Iedpfxjvla U Te Abxetg Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: used, Year of construction: 2007, High-pressure pump with 3 pistons for waterjet machines Ijdpfxoxix Dke Abxstg Control cabinet for the high-pressure pump 5-axis cutting head with complete assembly

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 15 kg, Fully functional waterjet system (manufactured circa 2001) with KUKA KR15 six-axis robot. The system operates with pure waterjet cutting (without abrasive additives) and is currently still in use for processing plastic components. Offline programming, demonstration possible. Includes KMT Streamline pump (15 HP). Complete system with automatic door opening and closing. Contact us if interested! Itedeyl Niqspfx Abxsg

Condition: good (used), Year of construction: 2016, functionality: fully functional, WJS Waterjet T-Model Advanced Machine system: T-Model NCT 30 Flying Bridge, 3 x 2 m cutting table High-pressure pump: BFT Ecotron 4037, 50HP / 4000 BAR Cutting tool: WJS-Basic cutting head Abrasive disposal system: WJS-Standard Itsdpfx Asy Epb Njbxeg

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: Isdsy Ecr Hopfx Abxotg - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: new, Year of construction: 2025, operating hours: 500 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Itodsxm Rigspfx Abxog Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Itedpfjwnidhsx Abxeg

Condition: excellent (used), Year of construction: 2023, operating hours: 59 h, functionality: fully functional, machine/vehicle number: S15085092, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, type of input current: three-phase, input voltage: 400 V, pressure: 2,000 bar, Waterjet cutting machine with 1500x800 mm working area, newly installed by the manufacturer in July 2023. Very little used (less than 60 hours). Buyer financing available. Itedpfsyprq Eox Abxsg

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Iodpfx Asnab Rlsbxjtg Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: Iodpfxjnab Rze Abxotg - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available Itodpfjnab Siex Abxeg - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Itedoguqucepfx Abxeg Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Itedpfxshw Nfqe Abxsg Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Iedpfexxldcsx Abxotg Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: used, Year of construction: 2010, operating hours: 10,409 h, functionality: fully functional, working range: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6,000 bar, operating pressure: 6,000 bar, input current: 120 A, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, year of last overhaul: 2026, water pressure: 6,000 bar, pump pressure: 6,000 bar, working length: 4,000 mm, input frequency: 50 Hz, We offer this used Flow FLOW Mach 4 4020b waterjet cutting system, year of manufacture 2010. Dynamic XD | 100 HP HyperJet | NEW Drive Retrofit 2026 Manufacturer: Flow Model: FLOW Mach 4 4020b Year: 2010 Machine Description For sale is a high-performance and freshly serviced precision waterjet cutting system from the global market leader FLOW, model Mach 4 4020b. This system is equipped with Flow’s high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. Special highlight for buyers: In January 2026, the manufacturer (Flow Europe GmbH) carried out a comprehensive technical service. An official drive controller retrofit kit was installed (approx. €18,000 incl. installation). As original replacement controllers for this model year are often no longer available, this upgrade offers long-term spare parts availability and modernized electronic control. A test cut was successfully carried out following the retrofit. Technical Data • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with automatic angular error correction) was used by us only for automatic angle compensation • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Electrical requirements: 400V, 50Hz, 3-phase (120A full load) Condition & Equipment • Technical condition: Immediately operational • Maintenance history: Current technical service report from the manufacturer available (January 2026) • Upgrades: New drive controllers (retrofit kit) and overhauled wiring on C-axis • Productivity: The 6,000-bar technology enables up to 50% faster cutting compared to standard systems Inspection & Transaction • The system is currently still connected and can be viewed and demonstrated under power • Location: 78549 Spaichingen (Baden-Württemberg), Germany • Viewing can be arranged at short notice by appointment Scope of Delivery • Flow Mach 4 4020b waterjet system Iodpfxoywtits Abxotg • HyperJet 100 high-pressure pump • Control terminal including software • Technical acceptance report / service report from 01/2026 • Abrasive system: Flow Paser 4 Legal Notice (B2B): Sale only to commercial customers. Warranty, liability for material defects, and returns are excluded. Sold as seen/tested. All information is provided without guarantee, subject to errors and prior sale. If you have any questions or require further information, please feel free to contact us via message or by phone.

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Isdpfx Aox Ig Sisbxotg Optional manual swivel head available at extra cost – see pictures.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Iedpfx Abjyq Rdyoxjtg Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: ready for operation (used), Year of construction: 2009, Travelling gantry machining centre X-axis working area: 2500 mm Y-axis working area: 1000 mm Z-axis working area: 700 mm 5-axis electrospindle 6-position tool changer Immediately available Iodsynz N Ujpfx Abxjtg

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system Itodoyclvnepfx Abxog - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials