Waterjet cutting machines

Flow FLOW Mach 100

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty Gtsdoha E S Tspfx Afkot The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 12-Weeks delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ MULTI-TREAT SPRAY PRE TREATMENT MACHINE ✅Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated. According to the process steps, the number of tanks and how many tanks are heated are determined. ✅The heating inside the tank is provided by gas heat exchangers. The processes can be monitored, times and temperatures of all processes can be adjusted via the Plc touchscreen. ✅Any failures that may occur in the system can be observed from the electrical panel. Gsdpefggcwsfx Afkjtt ✅Automatic floats in tanks, stop the system automatically when there is not enough water or chemicals in the tanks and the amount of liquid is automatically supplied by transferring between the tanks and the system stays safe. ✅Under all tanks there is leakage pool. Leakage pool has made from 316 SS. Tanks are made of 316 Quality 2 mm Stainless Steel. The material is passed through penetration tests made of argon welded and sealed. The grids inside the tank prevent mud access to the pumps. ✅The cabin interior consists of sandwich panels 304 stainless steel and the exterior is made of powder coated sheetiron. ✅Panel thickness is 80mm. It comes from polyurethane filled stainless steel panels. PPT ring pipes and nozzles provide long life usage. ✅Thanks to the steam suction fan, vapor diffusion into the working area from the system is prevented. The washing machine doors are container type and they are sealed with silicone gaskets. ✅The movable washing platform in the cabin moves back and forth through the cabin to wash the materials. The hoses are carried by the mobile carrier system. There are separate pumps for every processes and 1 waste pump for discharging liquids from the tanks. Discharging pump will be connected to chemical discharging tank. ✅The machine floor is designed to be inclined towards the pool discharge area. ✅There are manual application liquid spray guns for every processes for manual usage. System has manual mode for pretreatment. Dripping time and process time can adjusted from the PLC panel and dripping time is valid for manual application.

Year of construction: 2024, condition: new, Machine was installed at the customer’s site but never commissioned, NEW and with full Breton warranty. Breton GENYA Switch – 5-axis CNC bridge saw with integrated vacuum suction system and tilting table. The Breton GENYA Switch is a state-of-the-art 5-axis CNC saw system with a monolithic design for maximum precision, speed, and flexibility in stone processing. It combines automated cutting processes with an integrated vacuum suction system, enabling fully automatic handling and positioning of slabs – ideal for kitchen countertops, architectural pieces, and complex cuts. Highlights: Gjdpfx Aowthlnjfkett Monoblock construction – no foundation work required, fast commissioning 5 interpolated axes – for complex geometries, angle cuts, and pockets Suction system – automatic repositioning and optimization of cutting sequence without operator intervention Exchange table, parallel set-up during main time Camera and CAD import functions – for efficient nesting and cut optimization Automatic tool changer with 10+2 tool positions -SPINDLE MOTOR ISO40 8000 RPM -Hand wheel -BLADE ALIGNMENT UNIT -VEIN MATCHING – permanent license -Linear, fixed tool magazine ISO 40 with 10+2 tool slots -Saw blade head Ø400 mm with ISO 40 tool holder -Max. saw blade Ø600 mm -AUTOMATIC LUBRICATION SYSTEM FOR GENYA -ISO 40 tool holder for milling cutters and drills -Thickness probe -Camera system -Suction system up to 500 kg -Automatic table changer with tilting table Including installation and training. Machine available at short notice.

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Gsdpshw Ng Ijfx Afkott Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Gtsdjcggy Sopfx Afket - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Gsdpfedfgg Iex Afkott C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gjdpfx Ajxluk Ssfkjtt

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Gtjdpfx Ajw N Nixefkjt Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Gsdjqwyzfjpfx Afkett Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor Gtedpfx Asxb Edzjfket - Chip conveyor - Technical documentation