Waterjet cutting machine

STM 3015 mit Pumpe Ecotron 40.37 mit Kran und Sauganlage neuwertig

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Dkjdohx Elfepfx Akvjr Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x Dodpfsywllyjx Akvekr • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw Dkedpfowld Tfsx Akver 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Accessories: Dsdpjvdrx Usfx Akvokr - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin removable, electrically secured - control panel on the substructure - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, loading space volume: 35,000 m³, tire size: 385 /65 R22,5, Year of construction: 2026, operation weight: 60,000 kg, chassis manufacturer: Lider, Equipment: ABS, 4 Axles Heavy-Duty Tipper. Lider Trailer for Heavy-Duty Trailers. High Quality and Durability Manufacturing. EU Standards. Dkjdpsrcb N Ejfx Akvor One-year Warranty for Manufacturing Defects. EBS or Double Line Brake Systems. Customer Requested Color. 2026 Production

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. Dsdshknbrjpfx Akvekr PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Dkodpswu Du Iofx Akvjr Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements Dkjdev Srguopfx Akvsr • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Dodehabdpepfx Akvjkr Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Djdpfx Aksym Sdysvskr