Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Dcodoznmpxjpfx Ac Hok Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information Dcjdsztbwhjpfx Ac Hsk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2003, condition: used, Colour: Beige Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 310 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 9000 Dcjdpfx Ajzta Acoc Hek - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Options: Welding fume extraction, Control cabinet - Transport dimensions: 1300mm x 3100mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1998, condition: used, Technical details: Dedpfow Awwfex Ac Heck pipe system - processing diameter: - mm pipe system - inlet: - mm volume flow ventilator - shred: - m³/h connection electric: 400 V Air volume: 2700 m³/h filter surface area: 52,5 m² volume: 18,7 L max. temperature: 50 Grad operating pressure: -/+ 0,1 bar weight of the machine approx.: 1250 kg Pressure max.: 5 bar dimensions L x W x H: 2,3 x 2,35 x 2,8 m Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. Dcsdpfx Aceyr I Ifo Hok AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 – 120 13 rotor knives Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 – 120 26 rotor knives

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm Djdpfx Aeyr Tlcec Heck 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Dodpfx Ajyr Tnwjc Heck Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor Dedpfx Asyr Tn Djc Heck 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12195, Infeed: 600 x 600 mm Drive: 2 x 37 kW Dedoyr Tnqjpfx Ac Hjck

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Dodpfx Aceyr Tmao Heck Inlet dimensions: 500 x 350 mm

Condition: used, machine/vehicle number: 11056, 3-blade rotor 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Dedpfx Acsyr Tihe Hjck Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Djdoyr I E Ropfx Ac Heck Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Stator blade row: 2 Rotor width: 280 mm Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm Dedpfxoyr Tmgs Ac Hjck

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Dcjdpfjyr Tpujx Ac Hjk Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor Dcodpfx Asyr Tqroc Hok 2 rows of stator knives Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Dcedpfxoyr Tx As Ac Hsk Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Rotor width: 400 mm Dcsdpfx Acoyr Tvbs Hok Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 400 x 340 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Dcedpfxeyr Txve Ac Hsk Rotor knives: 3×2 Stator knives: 2 Feed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Dsdsyr Txpopfx Ac Heck Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: used, machine/vehicle number: 12861, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Feed opening approx. 400 x 600 mm Dsdeyr Trcjpfx Ac Hsck Drive motor: 22 kW

Condition: used, machine/vehicle number: 12949, Rotor diameter: 400 mm Rotor width: 600 mm Rotor blades: 3 Dsdpfsyr Trvsx Ac Heck Stator blades: 2 Inlet cross-section approx. 400 x 600 mm Drive motor: 18.5 kW

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: Dcedpfx Acsyr I Eqj Hek This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills designed for the fine grinding of nearly all thermoplastic plastics. Typical applications include the fine pulverization of regrind material or virgin material from profile, pipe, or sheet extrusion. Additionally, these mills can be used in the food, chemical, and pharmaceutical industries. The material is fed centrally through the stationary grinding disc with a dosing device. Fine grinding takes place between the rotating and stationary grinding discs. Discharge occurs via pneumatic extraction. Dedeyr I Hhepfx Ac Hock

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Dcedpfxjyr Tkfs Ac Hok The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor knives Djdpeyr Tk Sofx Ac Hsck 2 rows of stator knives Cross section approx. 250 x 300 mm Drive: 5.5 kW