Iveco eurotrakker 440 for sale
Your location was not identified (Edit)
|
5
Used distribution axis for Iveco Stralis and Euro TrakkerManufacturer: MERITORComponente: MD 15Diff. Carrier: DTS35A-DTS 35 Part Number: A53200A205534Factory Number Diff.: 07091207038AchsTranslation: 3.40-matching 2nd rear axle also available. The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or ch... more
|
|
6
Friedrichsdorf, Germany
dealership location
17989 km
2014
used
Vehicle - Make: Manitou - Type: MT1440 - Drive type: Diesel - Load capacity: 4000kg - Load center: 500 - Lifting height: 13600 mm - Reach: 0 mm - Built: 2014 - Engine hours: 1780 - Internal No.: B080719 _____ Mast data - Mast type: Telescope - Lifting height: 13600 mm - Height: 2605 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensions - Leng... more
|
|
6
Rolle, CH, Switzerland
dealership location
18294 km
2001
ready for operation (used)
Machine working. Exchange due to new purchase. Dismounted and ready to be delivered. X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Berjuom0qy Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They a... more
|
|
3
Frammersbach, Germany
dealership location
17944 km
ready for operation (used)
Used excellent condition Dwkh9e more
|
|
6
Remscheid, Germany
dealership location
18036 km
ready for operation (used)
Bosch R600B CNC Systhem Board Mat.Nr. 050734-104401 + board 050764-102 , used, normal traces of use, 100% functional, supplied with photos Stfwlw more
|
|
0
Power: 5, 5kW Suitability: Rubber, plastics, organic substances 2 x 2-blade rotor 2 x 2 Statormesserreihen Rotor diameter: 150 mm Working width: 440 mm G0sj7sf Inlet cross section: approx. 150 x 440 mm Drive: 5, 5kW 4 x available (Engine numbers: 1086, 1087, 1088, 1089 / second-hand machine) more
|
|
11
Sawing machines / Bandsaws Brand: BMSY Type: 440 DGH Year of make: 2016 Demo model Capacity round 45º: 410 mm ø Capacity round 60º: 320 mm ø Bfg3neh80t Capacity round 90º: 440 mm ø Capacity square 45º: 410 mm Capacity square 90º: 440 mm Capacity square 60º: 250 mm Capacity rectangular 45º: 440 x 410 mm Capacity rectangular 60º: 440 x 250 mm Capacity rectangular 90º: 440 x 610 mm Mitre: 2 x 60 ° Working height: 860 mm Saw blade dimension: 5.200 x 34 x 1,1 mm Saw speed: 20- 100... more
|
|
4
Barntrup, Germany
dealership location
17877 km
2011
used
Single sided Edgeprofile sanding machine Brand: IMA Typ: Novimat Systems 1 G 80 / 440 Year: 2011 Left side machine Equipment: Manual adjustment for the workpiece overhang. Speed: 5 - 25 m/min. frequency controlled 1 Premilling unit with 2 motors Free space Tngmyru 1 Sanding unit for straight edges, oscilated 1 Profile sanding unit for R3 from bottom 1 Profile sanding unit for R5 from top Free space for 1 Profile sanding unit from bottom + 1 Profile sanding unit from top (The air floa... more
|
|
3
Bystronic Bystar 4020 4400w Byvision Year 2005 Model: Bystar 4020 Tot. Weight: 6500 Kg Max weight of sheets Kg/m²: 160 Metal sheets dimension : 4000×2000 mm Axes Z: 170 mm Max. thickness: Steel: 20mm Inox: 15mm Bfg0t7ggut Alluminium: 8mm Acceleration axes X/Y max 3,0 m/s² Cutting speed max. : 50m/min Contact us for information more
|
|
11
Machine will be available around mid-October 2019 and is ready for use. Steered bridge Operation via 10" colour touchscreen. Motorised walk-in ruler. Bfgyvkpjgb Front sprinkler system. Diamond pre-cut cutter. Adhesive box. Motorised pressure zone with 1 large and 2 small pressure rollers. Double-cut saws. Motorised fine milling machines. Motorised double angle cutter. Manual PVC scraper. Flat scraper. Rear sprinkler system. Polishing brushes Dimensions machine : 5000x1500x1... more
|
|
|
|
4
Remscheid, Germany
dealership location
18036 km
ready for operation (used)
Bosch 052146-204401 Board made of TR15-R amplifier module , serial number according to photo , used, normal traces of use, 100% functional, supplied with photos Bfgf2kiew7 more
|
|
3
Power: 15 kW Suitability: Plastics, wood, organic matter 3 knife rotor (rotor knife 3x2) 3 stator knife rows Rotor diameter: 320 mm Rotor width: 400 mm Teg9hhoi Inlet cross-section: About 360 x 440 mm (Machine number: 11060/used machine) more
|
|
3
4-axis CNC quick radial drilling machine Working table: 1800mmx 600mm Boom travel distance 1050mm Tool holder SK 40 Nn732 Coolant device Thread cutting device Docomentation Test protocol for mechanics and electrics more
|
|
5
Used manual transmission with auxiliary drive for Iveco Euro Cargo tipper with rope train circuit type: 2855 B 6Parent number: 8871007legisll. VAT must be deposited as a deposit when exporting outside the EU, ALL ANGABEN WITHOUT WEWEAR, ZWISCHENVERKAUF + IRRTUM VORBEHALTEN condition for the closing of the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license ... more
|
|
10
We offer you: Sub-apparatus Manufacturer: Herbert Lindner Figt9ge • Disc: approx. 440mm Hookers: 8 pcs. Groove width: approx. 14mm without power cable SKU: 000001 On request, you will of course receive a regular invoice with VAT. PLEASE ALSO TAKE NOTE OF OUR OTHER AUCTIONS - YOU CAN ALSO VISIT OUR ITEMS ON SITE! Changes and errors in the technical data and data, as well as Intermediate sale reserved!*** more
|
|
6
Remscheid, Germany
dealership location
18036 km
ready for operation (used)
Bosch R600B CNC Systhem Board Mat.Nr. 050734-104401 + board 050764-102 , used, normal traces of use, 100% functional, supplied with photos Ekdnf9x more
|
|
12
Mettenhausen, Germany
17769 km
2009
excellent (used)
L&Z Lathe V-Trade Type: BMT 1440ZH Y.O.M. 2009 Tip width 1000mm. Turning diameter over bed 356mm, over cross slide 216mm, in the crumpling 508mm. Spindle bore 38mm. Speeds 40 - 1800 rpm. Advance surges long and plan. Thread cutting: Metr. Inch. Module. Dp. Tailstock MK 3. Facilities: Bfgoub2yml 3 axes digital display. 3 Baking chuck 160mm with change jaws. 4 Baking food 200mm. Multifix with 1 piece steel holder. Coolant device. Working light. Not - Off Spindle brake. Centerin... more
|
|
4
4-axis CNC quick radial drill Work table 8000mm x 800mm Travel: X: 8000mm Y: 1050mm Z: 200mm W: 400mm Tool holder SK 40 Coolant device Zulzouaw Thread cutting device Documentation Test protocol for mechanics and electrics more
|
|
13
I sell the edge banding machine Biesse Akron 440 year 2010: Premilling Dmtiz93 Edge banding End cutting saws Tilting radius milling pneumatic adjustable Corner rounding 2-motor Radius scrapers Glue scrapers Polishing brushes Separation fluid spraying + 1 additional glue tank 303.000 meters edgebanded. CE Mark. Good condition! more
|
|
7
Cerreto D'Esi, Italy
dealership location
17814 km
2000
ready for operation (used)
Tonnage:125 Clearence between tie-bars:475x450 Screw diameter:45 Calculated shot volume:293 Min/Max mould thickness: 230-460 Core pull: 1 Euromap: 1250-440 Mov. plasten stroke: 450 Bfae3soqdo Air ejection: 1 more
|
|
5
Iveco No.: VDO 504156164Siemens No.: 1557.0001010002 dashboard of Iveco Stralis, used, different versions on Lager.Bedingung for the purchase is a business-business of the buyer and their appropriate proof. Please send us proof of your business upon completion of the purchase-commercial activity (E.g., tax identification number, business license or association or Chamber card). Shipping delivery takes place after evidence of business-Gewerbetätigkeit.Verkauf and delivery be made solely on the ba... more
|
|
5
Schutterwald, Germany
dealership location
18115 km
ready for operation (used)
Saw round material up to diameter 440 mm Saw flat 800 mm x 440 mm Masch.# 3 4015 Bauj. 1981 Stepless sawmill drive Hydraulic cut pressure regulation adjustable sawing Tub for spa fishing & cue-meal drain Spreads hydraulic Hydraulic Saegeband voltage Engine drive 4 kw, hydraulics 1.1 kw Cutting speed continuously 16 – 80 m/min Band mass 5400 x 41 x 1.3 mm Material diameter 440 mm Masch.Mass: 2580 x 990 x 1480 mm Weight about 1900 kg Be9rnwvb0e more
|
|
7
Producer DEMAG Type Ergotech System 150-440 H -120 V 2K Year 1999 Clamping unit Clamping force 150 ton Opening stroke 500 mm Distance between tie bars 500 x 500 mm Mould height min. 250 mm Mould height max. 660 mm Hvmupk9 Platen size (h x v) 750 x 750 mm Injection unit Screw diameter 45 + 35 mm Injection volume 293 + 165 cm³ Shot weight 260 + 149 g Injection pressure 1466 + 2020 bar Measurements and weight Dimensions 5,65 x 1,7 x 2,0 m Machine weight 8400 kg more
|
|
3
ST GERMAIN DE PASQUIER, France
dealership location
18526 km
ready for operation (used)
Serial number 7955 Year 1995 S/ bench (mm) 360 Pin bore (mm) 42 Th8f7r0y Distance between points (mm) 750 admitted in the broken (mm) 560 Machine equipped with: Fixed bezel Machine Weight (T) 0.9 more
|
|
7
Cerreto D'Esi, Italy
dealership location
17814 km
1987
ready for operation (used)
Tonnage:650 Clearence between tie-bars:820x820 Screw diameter:90 Min/Max mould thickness: 250-900 Uan9r8e8 Robot connection Euromap-12:Yes Core pull: 2 Mov. plasten stroke: 920 more
|
|
2
ZF Gear S5-30, S5-30, Iveco Magirus 130R80, 130R81 ... If present several times, the condition for the conclusion of the purchase is a commercial activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
|
|
3
MICROMASTER 440 without filter 3AC500-600V+10/-10% 47-63Hz Constant torque 55kW Z30wlobd Overload 150% 60S, 200% 3S square moment 75kW 850x 350x 320 (HxWxD) Protection class IP20 Ambient temperature 10+50°C without AOP/BOP more
|
|
9
Tow truck Iveco Type 75E17 total permissible weight 7.49to Built in 2004 from 1. Hd only about 169,000 km Tüv new Top Condition Air suspension rear Ball head trailer coupling 6 gear Green environmental badge Hydraulic winch Mumenk more
|
|
15
Iveco Johnston Street sweeper WITH DEUTZ REVISIONMOTOR is in perfect condition. It is built in 1999 and is ready for work immediately. Please watch the linked youtube video to see the machine in its working state. Bff2fptpxc more
|
|
7
ST GERMAIN DE PASQUIER, France
dealership location
18526 km
ready for operation (used)
Serial number v7420 Bzneltlu S/ bench (mm) 440 Distance between points (mm) 2800 Machine Weight (T) 11 more
|
|
15
Eching, Germany
dealership location
17823 km
ready for operation (used)
7.000 €
Offer Another 7 days
Truck Iveco Tipper approx. 1 piece truck Iveco tipper, FIN WJMB1VNS10C115060, 228 kW, 7.790 ccm diesel, ez: 24.03.2003, two-axle, tipper, color: orange, charging arm Hiab 085 behind cab, device for sliding shield, characteristic. PAF-W 294 from location 84174 Eching Item number: 000063288 Nn0sj Location: 84174 Eching more
|
|
2
ZF 4S-120 GP + Z90 for IVECO MAGIRUS ... The condition for the conclusion of the purchase is a business--to-business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
|
|
8
Borken/Burlo, Germany
18021 km
excellent (used)
Nuaire NU 440-600-E Laminar Flow Sterile Workbench Description Nuaire Lamina airflow Class II Type A Model NU 440-600-E. UV lamps in the utility room. Working height 76 cm. External dimensions: 1972/835/1600mm Original price 8.181 Euro TECHNICAL DATA Model NU-440-600E 230 V / 50-60 Hz / 50-60 Hz Nominal size 1.8 m (6 ft.) Cabinet style Table top/console with optional base frame Sash height 10" (254 mm) / 8" (203 mm) External dimensions (W x D x H) in. mm] 77 ⅝ x 32 ⅞ x 6... more
|
|
6
Bedburg-Hau, Germany
dealership location
18066 km
used
- Audio system: Radio MAN basic Line (radio / CD) - Window jack electric - Speed control system (Tempomat) - Central locking - Towbar: Ring spring 2040 G 150 B - Automatic climate control - Additional remote/fog lights with turn-off light - Manual gearbox ZF 16 S - Wheelbase 3.90m - Multilift teledroper - German approval - TÜV NEW - Track bar newly built into MANjt - - Engine brake, leaf-air suspension, differential lock, color glazing, underrun protection First reg... more
|
|
2
W1D 5EU Brebners, United Kingdom
dealership location
18409 km
ready for operation (used)
Bd9r0sf79q Condition Used Stock Number 00002 This listing is for a Labcold Advanced RAFR44042 Double door Refrigerator more
|
|
7
cutting diameter 440 mm saw band length 5200 mm cutting width 440 mm dimensions of saw-band 5200 x 1,1 x 34 mm band speed 19 / 46 / 65 / 90 m/min capacity 90 degrees: square 440 x 440 mm cutting range flat 610 x 440 mm Sdnulgmh capacity 45 degrees: round 440 mm capacity 45 degrees: flat 500 x 190 mm capacity 45 degrees: square 420 x 420 mm cutting range round 30° = 330 mm total power requirement 3,7 kW weight of the machine ca. 1 t dimensions of the machine ca. 2,7 x 1,2 x 1,6 m Electric 380 ... more
|
|
6
Friedrichsdorf, Germany
dealership location
17989 km
2007
used
Vehicle - Make: Jungheinrich - Type: EJC 214 3F440 - Drive type: Electric - Load capacity: 1400kg - Load center: 400 - Lifting height: 4440 mm - Reach: 0 mm C0mxbzx - Built: 2007 - Engine hours: 2695 - Internal No:: 280317-317 _____ Mast data - Mast type: Triplex - Lifting height: 4440 mm - Height: 1950 mm - Free stroke: 1500 mm - Fork carrier: 0 mm - Forks: 1200 x 0 x 0 mm _____... more
|
|
2
Transmission ZF 12 AS 2301different executing and without retarder suitable for MAN, IVECO, DAFCondition for the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on th... more
|
|
15
In the PDF file a list of the complete contents. Nn7b9 We sell everything in one piece. If you want more photos / videos, you can request them. Everything is sold excluding dismantling. more
|
|
5
table length:3000 mm table width:1500 mm burner heads: material thickness:Stahl 0,8 - 25 mm material thickness:Rostfreier Stahl 0,8 - 25 mm Be2oyethxv material thickness:Aluminium 0,8 - 12 mm beam diameter:20 mm laser source:Bylaser 4400 laser medium:Co2 total power requirement:62 kW weight of the machine ca.:13 t dimensions of the machine ca.: m Operating hours: approx. 53680 hours Laser switch-on hours: approx. 34900 hours included: - Changing table system with portal feeder: Vacuum port... more
|
|
4
W1D 5EU Brebners, United Kingdom
dealership location
18409 km
ready for operation (used)
Condition Used Gvstxs This is a listing for a Labcold Advanced RAFR44041 Double Door Refrigerator more
|
|
2
Frammersbach, Germany
dealership location
17944 km
ready for operation (used)
Condition: Bcknerk8m8 Used more
|
|
6
Subfamily: Edge gluing machine one-sided Type of attached edge: thin edge strong edge solid wood Adhesive system: EVA Max height of the panel: 60 mm Min. length of panel: 140 mm Min. width of panel: 50 mm Min. edge thickness: 0.4 mm ... more
|
|
3
Transmission ZF 12 AS 2330 TD, for IVECO Stralis, condition for the closing of the purchase is a business---business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business--to-business activity. Sales and delivery are carried out solely on the basis of our terms and cond... more
|
|
1
Toolchanger: 40 positions Cpymmb7u Renewed Siemens control (1998) Including many tools spindledia: 100 mm distance spindle-column: 1250 mm distance spindlenose-table min/max: 150/950 mm max workpieceweight: 3000 kg clampingdimensions: 1600 x 800 mm 6 T-slots - width: 18 mm more
|
|
2
Remscheid, Germany
dealership location
18036 km
ready for operation (used)
Siemens 4AP4403-8LB Transformer, used, 100% functional, shipping costs please request separately! Please ask for transport charges! Hmoq8yb more
|
|
9
W1D 5EU Brebners, United Kingdom
dealership location
18409 km
ready for operation (used)
Condition Used Bd9rfncorj This listing is for a BD Becton Dickinson PhoenixSpec Nephelometer 440910 more
|
|
4
Wiefelstede, Germany
dealership location
17866 km
used
Clamping plate, plate field, welding table, welding table, plate boring machine, straightening plate, tool holder - with holes Ø 11/9 mm Byjl9dy3 -Width 360 mm -Length 440 mm - Height 35 mm -Price per piece -Number 2 pcs -Weight 36.5 kg / St. more
|
|
|
