Used tool grinders for sale (182)

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) Todpfx Apezx R Awedjd -Documentation -Tool cabinet Errors and omissions excepted.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 12-09, Used tool grinding machine Manufacturer: SCHÜTTE Type: WU 405 Tedpfx Aj Aay Dqjpded Year of manufacture: 1998 Machine No.: 12/09

Condition: used, Year of construction: 1974, Clamping length: max. 635 Distance between centers: 125 Todpfx Aozcyynjpdsd Table travel: 400 Maximum grinding travel: approx. 300 Table speed, infinitely adjustable: 30-1000 mm/min Grinding spindle speed, 3 stages: 1750, 2150, 2850 1/min Weight: approx. 1800 kg

Condition: used, Year of construction: 2001, Strausak Fleximat 91L Technical Data Axes: X / Y / Z / B / C Travel distances X / Y / Z: 360 / 240 / 360 mm Rapid traverse rate X / Y / Z: 10,000 mm/min Grinding spindle speed: 1000–9000 min-1 Grinding wheel diameter max.: 160 mm Grinding spindle drive: 4 kW at 4000 min-1 Grinding spindle mount: STRAUSAK taper 1:5 Grinding spindle torque max.: 7 Nm Workpiece spindle mount: ISO 50 Tsdpfez Tc T Njx Apded Center height: 125 mm B-axis: Swiveling range: 470° B-axis: Rapid traverse rate max.: 4000°/min C-axis: Rotation range: Continuous C-axis: Angular speed max.: 14,400°/min Smallest input unit X / Y / Z: 0.001 mm Smallest input unit B / C: 0.001° Connection, weight, and dimensions Connected power: 12 kW Electrical connection: 3 × 400 V / 50 Hz Equipment and scope of supply Loading device Related accessories as shown in the photos Loading device and related accessories as shown in the photos. Technical data is subject to change without notice. Errors and prior sale are reserved. The properties and scope of supply agreed upon in the purchase contract shall apply.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Anca control system. Tsdpfx Apez Ry Tujdjd

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Year of manufacture: 1970 Colour: Grey Empty weight: 500 kg - Year: 1970 - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Tsdozry I Aopfx Apded VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,850 h, functionality: fully functional, Available from Q1/2027; equipment can still be adjusted to meet specific requirements. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear milling cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Working area: X-axis: 700 mm Y-axis: 410 mm Z-axis: 500 mm C-axis: Rotation angle 320° X3 auxiliary axis: Working area: 600 mm Grinding spindle: Tedez Dhdyspfx Apdjd Interface: HSK 80 E Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution, linear axes: 0.0001 mm Rapid traverse, linear axes: 30,000 mm/min Resolution, rotary axes: 0.001° Speed, C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as a spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840 DSL Tool changer: Dual-wheel Coolant system: Optional Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, commissioning, and handover), training, and final acceptance at the customer's site. Financing options available upon request.

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, NC Universal 5-Axis Tool-and Cutter Grinder Walter Helitronic Power Technical details: CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Tsdj Aawiqjpfx Apded Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Tjdev Hcblspfx Apded Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: used, Year of construction: 2006, Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader, Quinto software, version 4.3b, Software for cylindrical cutters, Software for conical cutters, Software for hemispherical conical cutters, Software for two-flute cutters, Software for three-flute cutters, Software for hob cutters, Software for up-and-down cutters, Software for wood drills, Software for tools with an axial angle, Software for taps, Software for step drills, Software for drills, types H and S, ISO axial software, ISO spiral software, Elbaron electrostatic mist extractor, Hydraulic workpiece clamping, Renishaw measuring probe, Automatic fire-extinguishing system, Automatic centralized lubrication system, Glass scales on the linear axes, 1 loading pallet, 16 grinding wheel flanges, 4 collets, 1 collet chuck, 1 automatic 5-jaw chuck, PMH. X-axis longitudinal movement: 380mm Y-axis transverse movement: 280 mm Z-axis vertical movement: 280 mm C-axis swivel range: 340° A-axis rotation range: 360 ° Center height: 210 mm Workpiece holder: ISO 50 Grinding wheel diameter: Max. 200 mm Drive power grinding lockers: 7,5 kW Grinding spindle speed: stepless 0 - 9000 rpm Connected load: 29 kW (400 V / 50 Hz) Dimensions W x D x H: 1590 x 1930 x 2550 mm mass: approx. 4800 kg Tedpfx Apez Rpnhodjd colour: turquoise / grey

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Tsdpfjzbt Aaex Apdjd

Condition: refurbished (used), total height: 1,050 mm, total length: 850 mm, total width: 620 mm, spindle speed (max.): 2,500 rpm, type of input current: three-phase, grinding wheel diameter: 175 mm, overall weight: 350 kg, rotational speed (max.): 2,500 rpm, grinding spindle motor power: 750 W, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2026, warranty duration: 24 months, For sale: fully overhauled, high-precision Agathon 175-A tool sharpener Accessories included with the machine: - 2 new Diametal MD16 and D91 grinding wheels Tjdpfsz R Darox Apdjd - Centralized automatic spindle lubrication - 1 articulated arm LED lamp, CCEA - 1 fixed table - 1 PET rear guard - 1 PET front guard - 1 new electrical unit, CE compliance certificate - 1 frequency converter for adjusting the spindle speed Machine price: CHF 19,900,- (excluding VAT)

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Manufacturer: KAPP Model: AST305B Year of manufacture: 1979 Serial number: 1137.05 With accessories Tsdpfxswzk R Ns Apdsd

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: FAF19SCULPTOR, grinding spindle motor power: 1,500 W, input current: 4 A, The Schneeberger Sculptor is a Swiss high-precision profile grinding machine, specifically designed for the sharpening and manufacturing of tools. The machine is fully operational and available for testing. It comes with a comprehensive set of accessories and parts. Tjdjyk S Rnjpfx Apdod

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Tedpfxjxuichj Apded

Condition: excellent (used), Year of construction: 1978, Universal tool grinding machine Manufacturer: DECKEL (Germany) Model: S11 Application: Regrinding of milling cutters, drills, and turning tools Tjdpfx Ajyzacnspdod Dimensions: approx. Length: 900 mm Width: 700 mm Height: 1,500 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Tjdpfx Apjxu E Nqsdjd Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Tedpezz Hk Nefx Apded Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: excellent (used), For sale: Professional tool grinder by HASBERG, model FSS. German-made, solid and precise construction. 📊 Technical data: Manufacturer: HASBERG Model: FSS Year of manufacture: approx. 1976 Power supply: 3-phase 220/380 V Motor power: 250 W Speed: 2750 rpm 🛠 Condition: The item is used, shows normal signs of wear, and is in good technical condition. Tedpfx Aoz Smxbopdjd The machine is fully functional and ready for operation. 📦 Included: Set of collets (various diameters – as shown in the photos) Additional grinding wheels Accessories as visible in the photos ✅ Advantages: Very robust construction (German quality) Large set of collets (high value) Precise machining and tool sharpening Ideal for workshops, tool rooms, or production ℹ️ Additional information: The set for sale is exactly as shown in the pictures. Inspection on site possible. Shipment on a pallet or personal collection possible.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A EQUIPMENT & FEATURES - Swiveling worktable ±90° Tsdpfey Er Ahox Apdsd - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar Tedpfxjzk Ek To Apded - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar - Drive: 400V, 50Hz, IE3

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Available from Q1/2027, or upon agreement. Equipment can be further adjusted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Work area: X-axis 700 mm Y-axis 410 mm Z-axis 500 mm C-axis rotation angle 320° X3 auxiliary axis: Optional Work area 600 mm Tedpfx Aez Dilfopded Grinding spindle: Interface HSK 80 E Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis: (A-axis SK50) Center height Standard 175 mm Speed as a spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840 DSL Tool changer: Double wheel Coolant system: Available upon request Extraction system: LTA Extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices from the extensive A. Haas clamping device catalog are possible. Individual, customer-specific training. Includes pre-acceptance at the manufacturer's plant, IBN (Initial Batch Numbering), training, and final acceptance at the customer's site. Financing also available upon request.

Condition: used, Year of construction: 1984, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL 465 / 84 Tedpew U Eg Dofx Apdod 380 V, 50 Hz Colour: green !!! Original paint !!! ! Machine is in conditon from seller ! motorised height adjustment, axial grinding spindle adjustment Accessories: * Dividing head Sk 40 with dividing disc 24 R with mounting points for optics * Dust extraction device without suction cup * Protective cover * 3 pcs. transport lugs * 1 set of technical sanding instructions * Operating key, operating instructions, spare parts list, wiring diagram

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Tsdpfxjzutnzs Apdsd Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Operating instructions .

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108076, grinding wheel diameter: 40 mm, overall weight: 550 kg, Used Weinig Rondamat 960 Tjdpfx Apjztzrxedjd Includes various grinding discs Shaft diameter 40mm