Used Stamping Cylinder for sale (8,562)

Condition: good (used), Heidelberg Cylinder SBB 56×82 Automatic Die Cutter Dcjdpfxexgbf Ej Af Isn One of the rarest models on the market. The machine has been serviced and maintained on time. Superb condition! Format: 560x820mm Machine ready for die cutting. Fully automatic, smooth speed control, central lubrication, and safety guards. Includes frame, cylinder plate, trolleys, and a set of fillers and locks.

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Dcsdpfx Asp H Swdef Ien Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Djdpfx Afowzyg Hs Iocn

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. Djdpfxoq Nd Rbj Af Ijcn 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is ready for production. Format: 540x720mm The machine is ready for die-cutting. Dedexgbffjpfx Af Iscn Fully automatic, central lubrication. Includes a mounting frame, cylinder sheet, trolleys, and a set of fillers and locks. Transport and installation are available.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Djdpfxowmy Rij Af Iocn Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,500 h, Cylinder (oil headed) Dodpfjwiu Sgsx Af Iscn

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Kleinschmidt, double-acting hydraulic cylinder stroke 25 mm -Type: KF22F-100 -Piston: Ø 100 mm -Piston rod: Ø 56 mm -Piston rod mount: M45x1 mm -Total length extended: 355 mm -Pressure range: max. 210 bar -Number: 2x cylinders available Dedpfx Afoxltqqe Iecn -Price: per piece -Dimensions: Ø 243 x 330 mm -Weight: 36 kg/piece

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Heidelberg SBG 56x77 Dodoxltnpjpfx Af Ijcn

Condition: ready for operation (used), L-profiel: 120 x 120 x 10 mm vlak staal: 300 x 15 mm rond/vierkant staal: 40 mm ponsen: dia 28 x 13 mm U/I-profiel: 100 mm Dcodpfx Aoxllixef Ion met elektrische achteraanslag

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Dodpfx Aoxlkq Isf Iecn Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: excellent (used), functionality: fully functional, Hot foil stamping machine with digital thermostat in excellent condition! Stamping frame 100x120mm. Foil feed with unwind and rewind. Sliding table. Electrical connection 230V/50Hz. Dcedpfx Afsxivg Ao Isn

Year of construction: 2021, condition: new, Maximum Operating Pressure 700bar Capacity Class (tonnage) 200 Maximum Cylinder Capacity Advance (kN)1995 Dodpohhfa Tsfx Af Iocn Stroke (mm) 152 Collapsed Height A (mm) 430 Extended Height B (mm) 582 Outside Diameter D (mm) 247 Cylinder Bore Diameter E (mm) 190,5 Plunger Diameter F (mm) 133,4 Base to Advance Port H (mm) 57 Top To Retract Port I (mm) 96 Saddle Diameter J (mm) 133 Weight (kg) 147

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-PA-GF 170845 -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar -Number: 6x cylinders available -Price: per piece -Dimensions: 165/85/H35 mm -Weight: 1.4 kg/piece Dsdpfxjxlnnko Af Iecn

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Sakurai Aktiprint SK UV Dryer Sakurai Automatic Stacker Fully Cleaned Dedpfx Asww Eilsf Iscn

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1400 mm Dcodexg Unajpfx Af Ien Measurements depth 3000 mm Machine weight 95000 kg This Müller HUQ 630.30 was manufactured in 2001. A robust mechanical stamping press with a nominal force of 6300 kN and a stroke rate of 15–60 strokes/min. It features a slide adjustment of 200 mm and can handle coil widths from 60 to 600 mm. Ideal for steel and aluminium, it supports a maximum coil weight of 6 tons. Consider the opportunity to buy this Müller HUQ 630.30 mechanical stamping press. Contact us for more information. Application Types Stamping

Condition: ready for operation (used), Met elektrische achteraanslag Dcodpoxgv E Tefx Af Ion Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm plate thickness 6,0 mm Djdpfx Ajuiz Iwjf Iocn Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm Dsdpfx Asr D N Eqef Iocn stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-BPA-GF 532316 -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar Dcedpfjxlnlvjx Af Ijn -Number: 3x cylinders available -Price: per piece -Dimensions: 190/85/H35 mm -Weight: 1.5 kg/piece

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-20-80-BPA-GF-AJ 532316 Dcsdpfx Asxlnhdef Ien -Piston: Ø 20 mm -Stroke: 80 mm -Max. pressure: 10 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 270/85/H35 mm -Weight: 1.5 kg/piece

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-50-PA-GF Dsdpfsf Sl U Dex Af Iscn -Piston: Ø 25 mm -Stroke: 50 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 135/95/H45 mm -Weight: 1.6 kg

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-30-PA-GF 170849 -Piston: Ø 25 mm -Stroke: 30 mm -Max. pressure: 10 bar -Number: 3x cylinders available -Price: per piece -Dimensions: 105/95/H45 mm -Weight: 1.4 kg/piece Dedpfjxlncusx Af Ijcn

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-16-10-PA-GF 170832 -Piston: Ø 16 mm -Stroke: 10 mm Dcedpfx Afjxlf Rie Ien -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 60/70/H30 mm -Weight: 0.5 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, tilt cylinders -Manufacturer: Still, hydraulic cylinder tilt cylinder double-acting stroke 50 mm -Type: 654662 -Piston rod: Ø 22 mm -Hole: Ø 17 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 385/68/H85 mm Dcedpfx Afoxhfvws Ion -Weight: 4.1 kg/piece