Condition: new, Year of construction: 2023, functionality: fully functional, DMC SD 30 RCS 110 - Automatic Wide Belt Sander New ex-demo machine, under warranty, has not been used, unpacked from foil Technical Specifications: - Working width: 1,100 mm - Min./max. working thickness: 4/170 mm - Abrasive belt width: 1,115 mm - Abrasive belt length: 1,900 mm Dcodpfxew Rpf Ne Ac Noc Configuration: - Equipped with 1 "R" unit (roller) and 2nd combined "CS" unit (roller/pad) - "C" version for RCS 110: • Pneumatic actuator activating the roller of the first "R" unit • Pneumatic actuator activating the roller of the second "CS" unit • MESAR electronic segmented pad with 20 sections • Electronic adjustment of the worktable height - Compliant with European safety regulations (CE standards) - R120/ steel calibration roller, 120 mm diameter, in first position - R140/65 – 65 Sh rubber grooved roller, 140 mm diameter, in second position - Electronic ammeter for the main motor to monitor power consumption - Electronic display of working thickness - Electronic oscillation of abrasive belts - Rubber pressure rollers - Vertical infeed roller on the first unit to prevent sudden ejection of workpieces - 60 Sh rubber feed belt - Infeed and outfeed support rollers (2 rollers each) - Automatic device for centering and tensioning of feed belt - Main motor power: 11 kW (2 speeds) - Oscillating nozzle system for blowing dust from the abrasive belts of the first and second unit with timer control - Variable feed belt speed via inverter: 0.75 kW (3.5–18 m/min) - “EYE-S” electronic programmer for machines with electronic segmented pads • 10'' touchscreen display

Year of construction: 1999, condition: excellent (used), 1999 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Grinding machines in Poland Subcategory: Through grinding machines Subcategory 2: Grinding machines, brushing machines Description Dedpfx Ajd Nmdkec Necc Manufacturer VANGROENWEGHE Model / type of TYPE M-300-COMBI / CE machine

Condition: excellent (used), Year of construction: 1994, Langzauner Edge Sanding Machine EK 3/4 - School Machine - Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Round sanding support Oscillation Height adjustment: table, manual Sanding belt tiltable: Yes Conformity marking: CE mark Total connected load: 4.6 kW Dcedpfsx Nrfwox Ac Noc Space requirements: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site - immediately available - Dcedpfox Nrwmsx Ac Nec

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 380 V, We are offering this used Löser RS-340 belt grinding machine, year of manufacture 2014. Manufacturer: Löser Machine type: RS-340 Year of manufacture: 2014 Power supply: 380 V Frequency: 50 Hz Serial number: 1542 Current type: Power consumption: Dsdpfoygbbnex Ac Nscc Speed n: If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Opportunity from a small Swiss business in excellent condition: Stefani 2-belt roller, sanding shoe, compressed air, 1100 mm Dedpfsycwx Iex Ac Necc

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. Dcjdpfxsu Afu Ds Ac Noc • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing disk for the polishing head Location: on stock

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Dcjdpfx Acsycpz Uj Nec Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: good (used), Year of construction: 1988, Working width 1.100 mm Number of sanding units 1 st. Workpiece thickness max. 150 mm sanding belt measurements 1.120 x 1.900 mm Motor roller 15 kW kW Dcsdsxzuwqspfx Ac Nec Feed speed 2,5 - 12,5 m/min.

Condition: refurbished (used), Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm, double sided Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Dcodpfxex Ahi Aj Ac Nec Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 80 cm x H 140 cm Weight: 390 kg with protractor We are looking forward to your questions and inquiries.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Dear Customers, Dsdpfx Aexlzizjc Njcc We are currently offering a fully refurbished Zimmermann oscillating drum sanding machine, ideal for model and mold making. Below are the technical specifications for type OZS: Table length: 500 mm Table width: 500 mm Table height above floor: 1,050 mm Drum diameter: 20-120 mm Voltage: 400V Power: 1.4 / 1.8 kW Speed: 1,400 / 2,800 rpm Extraction port diameter: 100 mm Equipped with emergency stop Dimensions: 840 x 810 x 1,300 mm Weight: 180 kg The machine has been newly repainted in RAL 7035 light grey. A completely new control cabinet was built and installed, meaning the entire electrical system is brand new. For machine safety, a motor brake and emergency stop system have been integrated. Mechanical components were either sourced from the manufacturer or custom fabricated. Included in the scope of supply are one sanding drum of your choice, sanding sleeves, and other machine-specific accessories. The machine is sold with a 6-month warranty! Price is plus VAT, which will be shown separately on the invoice. Free and insured shipping within Germany! If you have any questions, please feel free to contact us.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Belt length: 2,400 mm Dcodpfx Acjxy Nrgj Nec Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: refurbished (used), Dear customers, currently we offer you deflection rollers as well as drive rollers for profile belt sanding machines of the brand F. Zimmermann. The rollers were newly coated, with a more robust material for better durability, then crowned sanded and newly stored. The rolls fit the following machine types:Zimmermann PS0, year of manufacture independentZimmermann PS1, year of manufacture independentZimmermann PS1/2, year of manufacture independentZimmermann PS S, year of manufacture independentWhen ordering, please always specify the machine type and which rolls you require and in what quantity. We have everything in stock and can deliver at short notice, if you have any further questions please do not hesitate to contact me! Dcjdpjd S Eb Asfx Ac Noc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The rotatable turret module enables precise final sanding of eight different, quickly adjustable radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) as well as continuously adjustable 45° chamfers up to 16 mm wide, using an oscillating sanding belt. • Workpiece support extendable by 380 mm • Sanding belt oscillation with pneumatic belt cleaning • 16A socket for feed • Extraction port Ø 80 mm • Voltage: 400 V / Power: 2.2 kW Pre-milling unit • 1,100 W / 220 V • Infinitely variable up to 25,000 rpm • Milling range up to 12.5 mm radius Chassis Workpiece support Dcsdjyf Hd Sopfx Ac Nsc

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. Dedsych Igopfx Ac Nscc (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: Djdpfxoychqze Ac Necc • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: like new (used), DEMONSTRATION MACHINE Dcedsycc Tdspfx Ac Njc For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: like new (used), DISPLAY MACHINE For sale is an as-new JET double-drum sander DDS-237, equipped with a powerful 7.5 HP, 400 V motor and a maximum sanding width of 940 mm. The display machine is in original condition; therefore, you receive the full warranty. Technical data: - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction ports: 2 x 100 mm diameter - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €180.00 including VAT Germany: €210.00 including VAT South Tyrol: €240.00 including VAT Dsdpfx Aoycc R Njc Nocc Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Dcjdpfx Acsvvki Nj Nec

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Dcodjvvkipjpfx Ac Noc

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Dcjdpfx Aovvkkaec Njc

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Dodpfxswhqpro Ac Nscc

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Dedpfx Acswhqplj Nocc

Condition: like new (used), SHOWROOM MACHINE For sale is an as-new ECO Edge Sander KSC-26B 150 mm, equipped with a powerful 4 HP motor for demanding applications. The showroom machine is in its original condition, giving you the full warranty. Technical data: Dsdpfx Ajyb Sgwec Necc - 4 HP motor (400 V) - Belt length: 2,600 mm - Belt width: 150 mm - Oscillation motor: 0.3 HP - Table size: 750 x 300 mm - Weight: approx. 170 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €100.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €150.00 incl. VAT Related terms: ECO KSC-26B, edge sander, 150 mm belt, 4 HP motor, 400 V drive, oscillation, workshop equipment, woodworking, professional quality, sanding technology Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data Dcjdoyb Sfajpfx Ac Noc - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117