Condition: used, Calibrating machine brand Sandingmaster model CSB/2/900, roller + pad, with 900 belt, roller motor of approximately 11 Kw, pad motor of approximately 7.5 Kw. Used. Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 carpet, roller motor of about 11 Kw buffer motor about 7.5 Kw. Used. Crjboiv Dauo Eii A Nob

Condition: ready for operation (used), Year of construction: 1980, Functionality: fully functional, table length: 1,900 mm, table width: 1,400 mm, total length: 4,200 mm, input voltage: 230 V, frequency: 50 Hz, grinding height: 500 mm, Further technical data: Cebsu Eh Ils Eii A Njrb Suction connection: 120 mm Motor power: 9.7 kW Pneumatic sanding pad Sanding belt left and right rotation

Condition: new, Functionality: fully functional, saw band length: 2,280 mm, saw band width: 150 mm, Description: - Small, flexible all-rounder - Small table on the deflection roller for sanding radii and shapes Crsb Eiiju Ac Tqs A Nob - Motorized belt oscillation - Height-adjustable work table - Incl. 10 sanding belts 150 x 2280 mm K120 Technical data: Motor power: 2.2 kW 90-180 ° tiltable Belt speed: 22 m/s Table size: 750 x 350 mm Sanding belt dimensions: 150 x 2280 mm Weight: from 180 kg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, I am selling a very well preserved grinding machine due to a cross belt, due to the slowing down of the activity. Very little used Csb Eeun Igfeii A Norb

Condition: ready for operation (used), Year of construction: 2006, Wide belt sander manufactured by Bütfering Type Optimal STO 110 / C Year of construction 2006 Compact wide belt sanding machine from a small joinery business Working width 1100 mm Passage height max. approx. 150 mm Equipped with a combination sanding unit Crob Eijumlklsi A Nob Combination unit (steel roller + sanding pad), 15 kW Belt speed 18 m/sec. Sanding belt length 1900 mm Feed adjustable, max. approx. 13 m/min. Compressed air: 8 bar Power supply fuse: 50 A Operating voltage: 400 V, 50 Hz Total connected load: 17 kW Weight approx. 1700 kg

Condition: good (used), IMEAS COMBI 4-1900 sander with : 2 sanding heads with top and bottom rubber rollers year 1987 Total installed power 333 kW 2x 6 panel drive rollers. Brushing unit (1 top brush and 1 bottom brush) at output. Crob Eii Ajul T Ats Nsb Infeed lifting table. Conveyor, panel turner and stacker available.

Condition: used, Triangular belt sander Creb Esulxhzoii A Neb

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Crjbsukq I Rs Eii A Njb Operating side: left Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Length of the machine: 2,970 mm Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: used, Year of construction: 2017, D) Compact line for sanding calibration SOTTO/SOPRA mod. SYSTEM BT44CC 1350 RRD + RRD LOWER GROUPS MOD. B4C 1350 RRD BASEMENT * Fixed workpiece passage height at 900 mm from the ground * Insertion of ribbons from the left side of the machine * Main engines inside the base ADVANCEMENT BENCH * Motorized adjustment of the work surface with two-speed gear motor * Rear rubber-coated carpet drive roller * Device for automatic centering of the conveyor belt * Input safety microswitch for excess thickness * Useful working widths 1350 mm * Min. thickness and max. workable 3 ÷ 170 mm * Feed speed from 3.5 to 18 m/min OPERATING GROUPS * Belt oscillation with electronic control * Automatic disc brakes for quick stopping of groupsets PRESSURE SETS * Inlet grooved rubberized roller equipped with safety device to prevent pieces from returning ELECTRICAL EQUIPMENT * Automatic star/delta starting on the main engine * Magnetothermic protections on motors * Stabilized current power supply for electronic equipment "Hydra V-Pad" CONTROL PANEL * PLC terminal with color LCD display" * Touch screen functionality * Graphic display of the machine configuration * Machine management from touch screen, manually or through 120 configurable work programs by the user * Engagement/disengagement in working position and timing of the roller groups * Management and control of the belt advancement speed * Management and control of the working thickness * Automatic sequential ignition of the main engines * Activation and control of the timing of the belt cleaning blowers * Management of the windowed piece recognition program * Machine operation report (working hours/on hours) * Management of machine failure alarms and fault diagnosis on the electronic boards * Management of machines in compact line configuration EMERGENCIES / SAFETY * Hand protection strap at entry of pieces * Front and rear emergency mushroom switch * Lockable main switch * Automatic emergency stop of the machine in case of: - breakage of the abrasive belt - non-tensioned abrasive belt Ceb Eii Aep D Huhj Norb - lateral exit of the abrasive belt - opening of the access doors to the operating groups - lack of compressed air - motor overload SY B4C 1350* CARRYING BASE * * Control panel on the machine 1st OPERATING GROUP “R” R-CL 1350 * Calibrator/sanding roller assembly The group is equipped with: * Adjustment of the working position of the roller with indicator and pre-selection memory of the abrasive belt grain * Automatic disc brake for stopping the sanding belt in case of emergency * Automatic oscillation of the abrasive belt via electronic system * Abrasive belt rotating in the opposite direction to the advancement - Development of abrasive belt 1900 mm R250 Roller with a diameter of 250 mm R85 85 sh rubber coated calibrator roller with abrasive belt speed of 24 m/sec Pneumatic ON/OFF of the roller made with a pneumatic activation cylinder complete with micrometric adjustment of the position of the roller depending on the thickness of the abrasive belt Oscillating blower for cleaning the longitudinal abrasive belt The device is equipped with: - Operation of the swing with electronic system - Timed intervention activated directly by the piece being processed - Filte

Condition: good (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), operating pressure: 9 bar, motor voltage: 380 V, frequency: 50 Hz, workpiece width (max.): 900 mm, Wide belt in good condition for sale 2 rollers pre- and fine sanding 2 feed speeds Electrically height-adjustable with digital display. Sanding width 900mm Csb Eeuh Sccoii A Njrb 2 suction nozzles Help can be provided with loading.

Condition: new, Year of construction: 2024, It has a pneumatic sanding belt tensioning, 2,2KW motor, additional sanding table for round pieces. TECHNICAL SPECS: Creb Eehq N Uhsii A Neb - sanding belt dimensions: 150 x 2280 mm - Motor power: 2,2 kW - Belt speed: 22m/min - Sanding table dimensions: 750 x 350 mm - Weight: 180 Kg The sanding agregate is tiltable to horizontal positioning. For further info, do not hesitate to ask.

Condition: good (used), total length: 1,030 mm, total width: 900 mm, total height: 1,400 mm, table length: 900 mm, table width: 720 mm, power: 1.47 kW (2.00 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, The machine is cleaned and working. Crob Est Sr H Rjii A Njb Motor 2 HP 380V 1500 rpm

Condition: used, Calibrator brand SCM model Sandya LS1 R110, with roller and 1100 mm brush. Approximate absorbed power of 13 Kw. Used. Roller 11 kw Brush 2.2 kw Carpet 0.75 kw Csb Ejuk Hi Rjii A Nsrb

Condition: excellent (used), 1100 Crob Est Hgmzjii A Nob

Condition: reconditioned (used), Year of construction: 1991, Functionality: fully functional, grinding width: 1,100 mm, "M.-No. 2679, built 1991, Technical data: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm, sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec., feed speeds: 4 + 8 m/min, Motor power sanding unit: 11 kW, power setting: 0.55 kW, feed carpet: 1.3/1.8 kW, operating pressure: 6 bar, air requirement: 10 l/min., extraction sockets: 1 x 150 + 1 x 120 mm, WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg, Csb Eii Ajtppz Is Njrb Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding pad with automatic insertion and removal - Rigid sanding pad for solid wood frame sanding - Brush roller driven by the sanding unit - Automatic centering of the feed carpet - Feed carpet with high-quality rubber circular hole carpet and auto. Carpet centering - pneumatic sanding belt tensioning with length compensation - non-contact sanding belt oscillation, electronic - low-wear disc brake system for immediate stop of the sanding belt drive with pressure monitor - motorized thickness adjustment with digital display - workpiece thickness limiter at the infeed - semi-automatic workpiece thickness adjustment - grit thickness compensation for contact roller 4-fold, special accessory: workpiece thickness gauge".

Condition: used, No. 3 Cardboard benches with aspirator (2 galvanized and 1 green) Crob Eii Asp E S U Ns Neb

Condition: used, Horizontal sander with bench, Ghermandi brand, Olimpia B150 model, 380V power supply, KW 1.75 Hp 2.5 Cebjq Tiq Te Eii A Norb

Condition: used, Horizontal sander Crjb Ejq Rkupsii A Neb

Condition: used, Combined disc + vertical belt sander Crsb Eii Ajlagdwe Nob

Condition: used, Automatic 4-sided sander, Tagliabue brand model 40LB 2AR-2AT-4SNY, consisting of 2 lower belts, 2 upper belts, 2 right belts, 2 left belts, volts 380/50, serial number CI 40020, complete with control panel, used. Ceboq Rktvs Eii A Nsrb

Condition: used, Landonio 800 Double Disc Polishers Crebsizxvgj Eii A Njb

Condition: used, Butfering brand lower roller and brush sander, working width 1100 mm. used. Cob Eii Ajmgnpbe Njrb

Condition: used, Horizontal sander Cob Eiioq Rkute A Nerb

Condition: used, Handcrafted oscillating sander with a vertical belt and control panel Elettrotecnica Manzanese, used. Cob Eiisq R Af Hs A Njrb

Condition: used, Double belt horizontal sander (rough and fine) Crjb Eii Aeq Rkuwo Njb