Used log yard machinery for sale (30)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. Ncjdpfet Irffox Acbjt • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Equipment from 2019 Ncodpfxeu N Ac Ss Acbjt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Ncsdjwkdt Nspfx Acbjt The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: used, Year of construction: 1984, operating hours: 69,889 h, functionality: fully functional, machine/vehicle number: 620, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3,000 mm, Equipment: crane, For sale on behalf of a customer: an RSTW, year of manufacture 1984. It is equipped with a Jonsered crane with a reach of 13 meters. The machine is in good working condition and can be inspected. Ncjdpfxjy Ry Rqs Acbst

Condition: used, Year of construction: 2017, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Ncjdpfoy Rygljx Acbst Machine number: 1795 Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Grab: included Crane position: center Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Nsdpfx Acowxndnjbjct

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Njdpfsyz Twrox Acboct Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Holtec Bruks long log intake system with root reducer, consisting of: Cross infeed conveyor with 6 chain strands, split drive. Holtec hydraulic step feeder with split drive. Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. Holtec heavy-duty conveyor belt for round timber. Scraper conveyor for waste removal and distributor auger. Nodpswxck Aefx Acbsct

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Ncedpfsw Ug Agex Acbjt

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Ncsdpfx Asxgt U Eecbst Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Power: 45 kW Ncodsyyldzopfx Acbot !! Sale on behalf of customer !! Available from summer 2026

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Nedpfjyu U Rlsx Acbsct Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Round timber sorting Sawmills Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: used, Hedlund log sorting line 2x19 pockets Manufacturer: Hedlund Ncedpjyudlljfx Acbjt Pockets: 2x19 Year: 1980 Step feeder: Hedlund 2008 Control system: Siemens S7 300

Condition: good (used), Year of construction: 2015, HOLTEC ASC35-15S shear for materials such as wood scraps, ertalon profiles, fiberglass, particle boards, etc. Power: 11 kW. Includes vibrating conveyor, shear, and waste removal conveyor. Control cabinet. Cutting width: 350 mm. Cutting height: 150 mm. Log length: 60–220 mm. Low energy consumption, quiet operation, no scraps or dust. Ncjdsyttgcepfx Acbot

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Nedjyglfdspfx Acboct Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !!

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor Ncodpfxou Smq Se Acbot

Condition: new, Year of construction: 2025, Log deck for firewood production Njdpsvrchiofx Acbect Lenght 4 - 10 m Width 1,5 - 3 m 2, 3 or 4 chainlines Crossrollers sinhronised with firewood processor Adjustable height Hydraylic or electric driven

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Width starting from 1800 mm Njdpfxsv Ak Ife Acbsct Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Fully automatic loading system with sensors and controller

Condition: new, Year of construction: 2025, Log decks for band saws Ncedevt Dk Iopfx Acbet Length 4 - 10 m Height according to band saw height 2, 3 or more chainlines with heavy duty chains Hydraulic or electric gear driven Hydraulic arm with separator for log landing on band saw table Hydraulic arm length 800 - 1500 mm depending from band saw Hydraulic driven chain on hydraulic arm for log movement

Condition: new, Year of construction: 2024, Padeves trepe. Stepfeeder. For log feeding and separation Ncodjudzycjpfx Acbet Height from 1.0 m. Width from 1.8 - 6 m For material diameters from 5 - 20 cm Speed up to 20 pieces/minute Hydraulic Automatic feed

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Ncedpfx Acev N Eiqjbot

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Data output in .csv format Nodpjw U Axwsfx Acbjct Manufacturer and supplier KESAT, a.s. Installation date 03/2024 LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 In daily operation Condition: Well maintained. Ncsdpfxexpvr Ss Acbot

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Njdjwlaxkspfx Acboct Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Year of construction: 2024, condition: new, - 4 separation steps - log length on request - log diameter on request - Discharge height on request Njdpfx Aepfaubocbjct - 5,5 KW SEW gear motor - R127 SEW gearbox