Used Log Sorting Line for sale (11,547)

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen Kjdpfsgvu Alsx Ad Nswt - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Kwsdpfx Ajxgt U Ejd Not Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, Manufacturer: Ingvar Persson Pockets: 10 X 2 + 1 Log diameter: 10 - 65 cm Log length: 2,5 - 6 m Speed: Up to 60 m/min Log sorting line: - manufacturer: Ingvar Persson - pockets: 10 X 2 +1 - diameter: 10 - 65 cm - length: 2,5 - 6 m - speed: up to 60 m/min Kedpfspungtox Ad Nowt - total length for line 85 m - double log deck 4+7 m electric drive - timber crane ( operation fro operators cabin with joystick) - step feeder hydraulic - log haul - measurement system: REMA 910 2D scanner - hydraulic kickers: 18,5 kw

Condition: used, Ingvar Persson log sorting pockets 2x10 Kedpfx Adsg Ti Hgo Newt

Condition: used, Year of construction: 1992, functionality: unexamined, For sale a round log sorting line by Holtec. Equipped with a feeder for logs up to 16 meters long, a Cambio 66 debarker, a system for cutting logs into short logs, a Bruks feed reducer and 20 boxes for logs from 2.5 to 8 meters long. The line was dismantled about two months ago and transported to our site. Possibility of assembling and starting the line at the customer's - all elements are numbered. Very attractive price! Interested parties are invited to contact me Kodpfx Adev Iv T De Nowt

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Kwsdsxmr Rrepfx Ad Nst Main layout attached

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Kjdpfxev Nwrwe Ad Nswt

Condition: used, Small log line with Chipper-canters and single blade splitsaw Feeding / sawing speed 60 m/min. The line consist of below parts: - Conveyor for logs - Centring infeeder with log turner Kodeiiciqepfx Ad Nowt - First chipper-canter for round logs - Out feed conveyor - Block tilter - Infeeder to second canter - Second chipper-canter for blocks - Out feed conveyor - Single blade splitsaw We can also offer the equipment serviced

Condition: used, Board sorting line Manufacturer: Lekopa Year of production: 1989 16 pockets Pack press Kjdpfjx N S Hbex Ad Njwt Stacker with spacers Dynagrade

Year of construction: 2003, condition: good (used), Sorting line with 23 pockets and wood chipper Kodpfx Adsxuh Sbj Newt

Condition: new, Jartek dry and green board sorting line Kwsdpfx Adox Ddhke Not

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Sorting line for green sawn timber, 4 horizontal sorting pockets, 4 buffer pockets, trimmer, stacker, operating system Nolyx new in 2018, sorting speed 16000 pcs in 8 hours shift Kwsdotxzhljpfx Ad Njt

Condition: used, Dry board sorting line Kedpfx Adsxyixae Njwt ⁠Manufacturer: Reinholmen Speed: 90 pcs/min ⁠Pockets: 234 Year of production: 2000 Electric cabinets renovated 2022

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Kedpfxjxyaive Ad Nowt

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Kodpjxf Up Ujfx Ad Newt Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal Kwjdpfow Rg Emsx Ad Net - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Kwsdpfx Aoxg Rgxjd Nst Workpiece length max - 6.100 mm

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades - automation- TG automation, Sweden Sorting - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 Kwodjvzqcyjpfx Ad Nst - Drum chipper Erjo 204 MA - stacker Almab with 9 cassettes - Pack press

Condition: used, Green horizontal board sorting line IDC000060 - Manufacturer: Almab Kwjdpfxotk Hnbo Ad Nst - 4 pockets - Trimmer - Stacker with spacers - Automation Nolyx - 2018

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Kwodpfx Aow Ug Aged Net

Condition: new, Year of construction: 2025, Board sorting line MUL SL 6 for boards 2 - 7 m Ksdpjv H Sbusfx Ad Nowt For connection after band saw or separately Automatic sorting to left/right/straight forward Possibility to connect several blocks together for more sorting categories Semi automatic or fully automatic sorting function Customised slolutions and special projects

Year of construction: 2024, condition: new, The UMG-401.17 equipment set is designed for feeding logs with a diameter of 120–600 mm and a length of 2500–3200 mm to woodworking equipment for further processing. This unit includes a Bruks BR1450 log milling machine and a Valan kone VK100 debarker (adapted to birch wood), a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs around the entire equipment unit ensure convenient access during machine maintenance. The Valan kone debarker is protected from environmental influences by a metal frame house. The line throughput before the debarker is 12 pcs/min, after the debarker feeding to the cutting line is 28 pcs/min. Kwodpfx Ajv Uh N Dsd Njt

Condition: ready for operation (used), Technical characteristics FL20/16/30/II/S 400V 3Ph+n 200A Width 300mm 2x1 straightening unit 2x1 double shredder (bottom up) 3,5kW 2x1 standard milling unit 6kW 2x1 universal milling unit 4,5kW 2x1 universal milling unit 3,5kW Kjdpfety Rxisx Ad Njwt 2x1 universal milling unit 1kW 2x1 universal milling unit 0,75kW 2x1 sanding unit 2x1 sanding unit 2x3 KURTZ hot transfer units Mechanization of infeed and outfeed Sorting and quality control Search by typeDouble Power and Motors Pluging: Three-phased Overall dimensions

Condition: used, Year of construction: 1998, functionality: fully functional, Log sorting unit manufactured by Interlog, 2 x 25 pockets. From 1997, with new Rema system 2025 and operator chair from 2025. New step feeder manufactured by Hedlund from 2010. Kodpfxowu Tz De Ad Njwt

Year of construction: 1998, condition: used, functionality: fully functional, For sale: log sorting line: - Log length: 2–6 m - Log diameter: 16–55 cm - 12 boxes Kwjdpewxxaaofx Ad Net - Sorting by length or diameter - Metal detector - Cross-cut saw - 6 m raw material storage - Operator cabin