Used roll benders (motor-driven) for 6.1 - 14mm sheet thickness for sale (145)

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Isdpfx Ajx Dd Hyjhvetd Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Isdpfx Aoxzvp Ushvjtd Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Roll capacity cold: 3100 x 20 mm Itjdpfx Aex Enfxehved Roll dia upside: 370 mm Pre-bending: Yes

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Itodeyb Sz Iepfx Ahvjd OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control Itsdpfsyb Sywox Ahvod IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, Year of construction: 2024, neu 2024 9729 prompt, Zwischenverkauf v Türkei 28450 € 488.96 € 1 25600 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm Iedpfx Aheyb Szhsvetd 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 49900 € 953.09 € 2050 mm 13 mm 13 mm 10 mm 10 mm 8 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4300 mm 1600 mm 1470 mm 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Itjdpjyb Sydofx Ahvjd Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 34900 € 666.59 € 2050 mm 8 mm 8 mm 6 mm 8 mm 6 mm 6 mm 4 mm 180 mm 180 mm 150 mm 5 m/min 3850 mm 1350 mm 1290 mm 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH Isdpfx Aoyb S Afjhvetd OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20000 € Ijdpfxjyb Sz Ue Ahvetd 384 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 39400 € 752.54 € 2050 mm 10 mm 10 mm 8 mm 10 mm 8 mm 8 mm 6 mm 200 mm Itodpfx Ahjyb S Areved 200 mm 180 mm 6 m/min 3850 mm 1350 mm 1290 mm 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Itedpfx Ahoyb Sy Rsvsd Türkei 57000 € 1077.3 € 2550 mm 13 mm 13 mm 10 mm 10 mm 8 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1550 mm 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Iodpsyb Szusfx Ahvjtd Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52700 € 996.03 € 2550 mm 10 mm Itjdjyb Sykopfx Ahvjd 10 mm 8 mm 8 mm 6 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1470 mm 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, total length: 4,500 mm, total width: 900 mm, total height: 1,650 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 8419012 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.7 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 150 - Bottom roll diameter [mm]: 150 - Transport dimensions: 4500mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itedpfsyn Abfex Ahvod Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, total length: 4,400 mm, total width: 1,450 mm, total height: 1,300 mm, Empty weight: 5.200 kg Price: On request - Year: 2016 - Documentation available: Yes - └ Type Documentation: Electrical diagrams, Technical data, Operating system, User manual Itsdpfxsyn Aano Ahvod - CE marking present: Yes - CE certificate present: No - Serial number: 210384 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 210 - Bottom roll diameter [mm]: 210 - Options: Cone rolling, Digital readout - Transport dimensions: 4400mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 60600 € 1145.34 € 3100 mm 10 mm 10 mm Itedpoynm D Rsfx Ahved 8 mm 8 mm 6 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1550 mm 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 32480 € 620.37 € 1550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 180 mm Itedpsynmzpjfx Ahvod 180 mm 150 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 40900 € 781.19 € 2050 mm 10 mm 10 mm 8 mm 8 mm 6 mm 200 - 220 mm 200 - 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing Itodpfxeynmyfe Ahvsd 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 43550 € 831.81 € 1550 mm 12 mm 12 mm 10 mm 10 mm 8 mm 220 mm 200 mm 160 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm 1250 mm 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Itodpfx Aoynmx Iehvjd OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, number of digital displays: 4, Equipment: cone bending device, emergency stop, hardened rollers, 3-Roller Hydraulic Plate Bending Machine with Digital Displays Manufacturer: ROUNDO Model: PASS 230 Year of manufacture: 1992 Machine No.: 925194 Itodoyrh Edspfx Ahvjd Max. sheet width: 2000 mm Max. sheet thickness: 8 mm Pre-bending: 6 mm 2 powered rollers Cone bending device Drop-end bearing Hydraulic adjustment of rollers Hardened rollers Emergency stop Manual sheet support via spindle

Condition: new, Year of construction: 2025, roller diameter: 180 mm, - Capacity 2070 x 8 mm (minimum diameter 900 mm) 2070 x 6 mm (minimum diameter 270 mm) Pre-bending capacity 2070 x 6 (minimum diameter 900 mm) Pre-bending capacity 2070 x 4 (minimum diameter 270 mm) - 4 rollers - Hydraulic - Hardened rollers - Diameter of upper roller 180 mm - Diameter of lower roller 180 mm - Diameter of side rollers 150 mm - Digital display for the movement of the left roller - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller Isdovn Eqrepfx Ahvetd - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down Removal system with middle and side rollers - Hydraulic balancer system - Overload protection - Documentation - 400V

Condition: new, - Capacity 1570 x 9 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital readout for rear roller movement - Digital readout for bottom roller movement (material clamping) - Hardened rollers Isdpfxeg Ntlcj Ahvjtd - Conical rollers - Swivelling top roller - Central lubrication system - Brake motor - Emergency stop - Documentations - 400V

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Top roll 1 mm Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Total power requirement: 160 kW Ijdpeyn Agbofx Ahvetd Smallest roll-in diameter: 770 mm Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Bottom rolls Ø900 mm

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel Itodpfxsylyh Do Ahved - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: new, Ostas 3 rolls round bending machine SMR-S 1570 x 170 Technical specifications: Itsdsiw D Smspfx Ahvod Special equipment included in the price: motorized lower roll adjustment hardened rolls motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1570 mm smallest diameter 255 mm roll diameter 170 mm weight 1960 kg dimension L-W-H 3200 x 920 x 1260 mm motor 5,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²