Plate roller

OSTAS SMR-S 1570 x 190

Condition: used, Year of construction: 2017, machine/vehicle number: 119, Lg.no. 24217 Technical data: - max. working width 2520 mm Ppodpfx Aetpnploh Hel - max. material thickness at 40 kp / mm² strength 3.5 mm - preselectable bending angle setting - upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Ppedpfx Ael Dw D Esh Hol At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a flat working container bottom with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out through the integrated flap, which can be operated either manually or pneumatically. Upon request, reinforced suspension and a more powerful motor can be fitted to handle higher loads. The motor speed can be infinitely adjusted using a frequency converter (optional). With its side discharge system, the EVP-A 550 can be linked with other machines for integrated workflows. The system can also be equipped with a fully automated PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also attributable to the hot-cast polyurethane lining of the working container. Technical specifications: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Container inside diameter: 1,400 mm All prices are net plus the currently valid statutory VAT and shipping costs. The images may show the machine including optional accessories that are available at additional cost. If you are interested, please feel free to contact us. We are happy to offer professional, non-binding advice. Ppedpfx Ahsn Ut Ugs Hjl The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include information about our general terms and conditions, company details, and your right of withdrawal, before any purchase or contract is concluded.

Year of construction: 2021, condition: new, OSTAS PLATE ROLLER TYPE 4R OHS 1570 X 200 - 4 Rolls - Capacity 1570 x 9 - Hardened rollers - Diameter above roll 200 mm - Diameter under roller 200 mm - Diameter side roll 180 mm - Hydraulic system - Digital display for movement left roller - Digital display for movement middle under roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable Ppsdpfxogg N R Ho Ah Hel - Steel construction ST-52 - Hydraulic drop end for easy roll positioning - Hydraulic up and down movement system with middle and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Ppsdjv Taiaepfx Ah Hel Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: new, Year of construction: 2025, functionality: fully functional, Hall construction using modular building methods in any desired dimensions for flexible space utilization. Depending on your needs, the halls can be future-proofed at any time by being expanded, downsized, or having their layout modified. With clear spans of up to 100 m without intermediate supports, we offer you the optimal solution for your building requirements. Psdsxqzhnepfx Ah Hepl As a DEUTSCHE INDUSTRIEBAU customer, you benefit from over 45 years of experience, high-quality materials, and intelligent design concepts. Visit our showroom with 150,000 m² of display area on the B1 in 59590 Geseke, in the heart of Westphalia. We are your reliable partner for innovative hall construction.

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range Ppodpfx Aeu R R Avjh Hel 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Fastech 3-roll round bending machine FRS 2050 x 140 Pedpfx Ahehzq D Hj Hspl Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm weight 1530 kg dimension L-W-H 3240 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg Psdpfx Ahsi Ar Ruj Hepl

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Ppsdokh Niqjpfx Ah Hjl Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg