Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR We also have HSM V-press 1160 max balers from 2014-2015 available. Ncsdpfera Nyuex Afajr

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Ncedpfxeyrhi Nj Afasr Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Ncedpjyqw Sqjfx Afaor Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. Ncedpfx Aeyplwfjfajr The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Nsdpoypb Awofx Afajcr

Condition: used, Horizontal hydraulic bin crusher Ncodpfxepyncaj Afaor

Condition: excellent (used), Briquette production machine with a diameter of 80 mm and a capacity of 150 to 180 kg per hour, depending on the material. The machine has undergone a complete overhaul by an authorized service provider. The hydraulic pump has been replaced with a reinforced cast-iron unit, a steel hydraulic block has been installed, new Rexroth valves, new hydraulic hoses, new hydraulic oil and hydraulic filter, as well as new sealing and wear strips have been fitted. The control cabinet has been serviced, and the screw feeder motor features two speeds. The price includes commissioning within Poland using the customer’s material. For genuinely interested parties, I can provide a video of the machine in operation. Ncjdpfxsyi Utij Afajr

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used Nedpfx Afendcxgeajcr - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 390002114, pressing force: 12 t, Baler HSM V-Press 610 – Year of Manufacture 2013 – 120 kN Pressing Force Sale exclusively B2B (business to business) For sale is a fully functional vertical baler HSM V-Press 610 in well-maintained used condition. Ideal for trade, industry, logistics, or waste management companies to reduce the volume of cardboard and film materials. 🔧 Technical Specifications • Manufacturer: HSM • Model: V-Press 610 • Year: 2013 • Pressing force: 120 kN • Connection: 3~400 Volt / 50 Hz • Power: 3.0 kW • Rated current: 6.5 A • Machine number: 6110.134 • Serial number: 390002114 Features & Equipment • Electronic control with display • Automatic compaction cycle • Mechanical door locking with safety interlock • Bale strapping with plastic tape (reel holder included) • Emergency stop switch • Heavy-duty industrial design "Made in Germany" • GS-certified 📦 Suitable for • Cardboard • Mixed paper • Film (plastic wrap) Efficient volume reduction for lower disposal costs. 📍 Condition • Used, fully operational • Normal signs of wear (see pictures) • Regularly serviced • Inspection tags present Viewing by appointment possible. 💶 Terms of Sale • Sale exclusively to commercial customers Nsdpfxjynwqzj Afaecr • Sale excludes any warranty and guarantee • Collection by buyer • Loading can be arranged by agreement

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2014 Ncedsyibymspfx Afaer Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Ncsdpfeyibv Iex Afaer Pressing force: 40 t

Condition: used, Overall dimensions: 2800x2570x2000 mm Ncjdpfx Asyibhkofaer

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 54 t, input voltage: 400 V, power: 4 kW (5.44 HP), input frequency: 50 Hz, We offer this used baler HSM 500.1 V1, year of manufacture 2000. Model: HSM 500.1 V1 Machine number: 6132.234.0 Serial number: 210183092 Operating pressure: 54 t Ncjdpfxoym Nmrj Afaor Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: A Year of manufacture: 2000 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, power: 35 kW (47.59 HP), Hydraulic Briquette Press Manufacturer: Winter Model: BP 450 Ncodpfxjymwxvs Afaor Year of manufacture (according to nameplate): 2022 Technical data: Maximum output: 450 kg/h Motor: 35 kW / 400 V, 50 Hz Chip compression: min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture content < 14% Briquette dimensions: Length 150 mm, Width 60 mm Dimensions (L x W x H): 1,800 x 1,800 x 1,900 mm Weight: 3,000 kg Screws for material feed are included. Net purchase price: €37,900 plus legally applicable VAT. VAT will be shown separately on our invoice. Subject to alterations, errors and prior sale. Sale is made without guarantee or warranty and exclusively to businesses. Enquiries will be processed from Monday to Friday, between 8 am and 4 pm.

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Njdex H R U Sspfx Afaocr Year of manufacture: 2012 Pressing force: 40 t

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Njdpfeymmtcjx Afascr Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Ncsdpfx Aoymmmpjfasr Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Baler Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. Ncsdoymldtepfx Afaer We would be pleased if this complete baler line is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Ncedpfx Afsyhcyboajr Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Nedpjyhbxcefx Afaocr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys Ncsdsygud Aepfx Afaor - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee. Njdpfx Asygk H Tofaecr

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Ncsdov Ai Tgepfx Afasr Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: good (used), Brand: BRAMIDAN Ncodpfx Asv Akr Rsfasr Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Chamber depth (cm): 50 Chamber height (cm): 110 Year of production: 2010-2015 Pressure force (t): 3 Noise level (dB): 69

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Ncjdpfx Afoxl Rqbsasr Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level