Halilbeyli, Ankara Asfaltı 5. Km. No:10, 35743 Kemalpaşa/İzmir, Turkey
16513 km
2021
new
Also different models avaliable !
1. Bale Size : 400 mm x 400 mm x...
Cwi9qqna
2. Press Box Dimensions ( W x L x H ) : 1000 mm x 2700 mm x 900 mm
3. Loading Bunker Dimensions ( W x L x H ) : 1650 mm x 2300 mm x 800 mm
4. Feeding Opening ( W x L ) : 1000 mm x 1600 mm
5. Capacity : 4-6 ton / h ( Aluminum , 12-19 ton / h ( Copper ) , 11-17 ton / h ( Steel )
6. Cycle Time : 30 seconds
7. Preliminary Compression Thrust : 140 Tons
8. Secondary Compression Thrust : 210 Tons
9. Main Compression Thrus...
Shear baler mod. KATANA , available in several configurations:
KATANA 265
500 Ton Shearing force;
8qrdxjvgu
bale dimensions 900 x 700 mm x Variable;
Compression box length: 6000 mm;
KATANA 266
600 Ton Shearing force;
bale dimensions 900 x 700 mm x Variable;
Compression box length: 6000 mm;
KATANA 378
800 Ton Shearing force;
bale dimensions 900 x 700 mm x Variable;
Compression box length: 7000 mm
KATANA 3710
1000 Ton Shearing force;
bale dimensions 1000 x 800 mm x Variable;
Compression bo...
This machine is completely overhauled.
X9ks8
Cylinder surfaces hardened packings new engine completely overhauled press bed completely relined.... very good condition..,
service weight 50 t.
Al-Jon Car flattener in stationary version with Detroit Diesel drive. This flattener was serviced in our own workshop where all necessary repair and service was carried out on both mechanics as well as hydraulics.
Ieknslz
Baler for Vehicles mod. ORCA 6000P.
Technical details:
Compression box lenght: 6 meters
Bale dimension: 850 x 650 x V
Power unit: Diesel or Electric
Nh9sh
Ideall for large amounts of material: no need to flatten boxes before putting them into the baler.
Fully automated bale ejector, simplifies the removal of the bale.
Power Supply: 400 Volt 3 phase
Motor: 5.5 kW 16 Amp
Pressing Force: up to 50 Ton
Jwnida
Noise Level: 74 decibels
Cycle Times: 40 seconds
Height: 3.217 m (Transportation Ht: 2.5 m) x Width: 2.100m x Depth: 1.524 m
Weight: 1930 kg
BALE DIMENSIONS:
Height: 1.100 m x Width: 1.500 m x Depth: 1.100 m
Weight: 650 kg (depending on materia...
Scrap baling press 40x40xvar.
Epgxhlcbc
Box 2500 x 2000 x 1000 mm
Bale: 400 x 400 x var./ ca. 80 - 200 kg
Power 2 x 90 kW
Output: 72 bales/h, i. e. ca. 6 - 12 t/h
Also different models avaliable !
1. Bale Size: 600mm x 400mm x ...
2. Container Dimension (Width x Length x Height): 620mm x 1300mm x 620mm
3. Capacity: 0,8 – 1,2 tons / hour ( Iron - Steel )
4. Bale Weight: 45 – 100 kg
5. Cycle Time: 90 seconds
6. Top Cover Cylinder Pressure: 63 tons
7. Main Compression Cylinder Pressure: 110 tons
8. General Working Pressure : 250 bar
9. Machine Dimensions (Width x Length x Height) : 2120mm x 4350mm x 1320mm
10. Electric Motor: 15 kW
11. Machine Weight: 6.8...
Baler ORCA:
Main thecnical details:
Compression Box dimensions : 5250 mm or 4800 mm.
Bales dimensions: 850 x 650 x Variabile.
Power unit: electric or diesel motor.
Roll/on - Roll/off feature.
Optionals on demand:
Jack – lift system equipped with four swinging cylinders;
Crane and operator cab;
8p3uvrhj8
Sound proofing for diesel engine.
Scrap press Presmeccanica Mercury 120, fully automatic, with cutting punch and lateral compaction, mobile on rollers
year of construction 2005
Drive power 45 kW
Package dimensions 300 x 300 mm
Kq0e7w8f
Filling opening 1500 x 900 mm
Pressing pressure cutting punch 200 t
Pressing pressure side compaction 81 t
Please note:
All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
This offer is non-binding, prior sale e...
the Lindemann Sawes we have in stock is a nice and convenient size scrap-Metal baler with 30x30xVar.mm. bale size. we have put a lot of work into this machine such as partly new profile wear plates, new control box with PLC and remote control.
Blp2l2ikrk
Halilbeyli, Ankara Asfaltı 5. Km. No:10, 35743 Kemalpaşa/İzmir, Turkey
16513 km
2021
new
Different models are also available!
1.Bale Size: 400mm x 400mm x ...
2. Printing Box Dimensions (W x L x H): 1000 mm x 2600 mm x 900 mm
3. Loading Bunker Dimensions (W x L x H): 1400 mm x 1850 mm x 500mm
4. Feed opening (W x L): 1000 mm x 1600 mm
5. Capacity: 3-4 tons / hour (Aluminum, 13-15 tons / hour (Copper), 9-10 tons / hour (Steel)
6. Cycle Time: 45 seconds
7. Pre-Compression Push Printing: 120 Ton
8. Secondary Compression Push: 120 Ton
9. Main Compression Push Printing: 220 Ton
10. Work...
Baler mod. GRIFONE available in several version's:
GRIFONE 66:
Compression box length: 5000 mm
Bale dimensions: 600 x 600 mm x Variable;
Remote control
Powered by Electric motor or Diesel Engine;
Expulsion door for bales;
GRIFONE 55:
Compression box length: 5000 mm
Bale dimensions: 500 x 500 mm x Variable;
Remote control
Powered by Electric motor or Diesel Engine;
Expulsion door for bales;
The above machines can be equipped with the following accessories:
- Crane;
- Semi trailer
Mx9mr
- ...
the JMC McIntyre metal baler type 2035 is one of the smallest balers available in the Market. Standard it has electriv drive but the our stock machine is equiped with a Kubota Diesel drive.
bale size 200x350xvar. mm.
Bh9qppdk03
Transportable shear baler mod. GLADIO:
GLADIO 366
Shearing force: 600 Ton;
Compression box length: 6000 mm;
Bale size: 850 x 650 mm x Variable;
Nr. of cylinders per wing: 3
GLADIO 256
Shearing force: 600 Ton;
Compression box length: 5000 mm;
Bale size: 850 x 650 mm x Variable ;
Nr. of cylinders per wing: 2.
Power unit for both models: Electric or Diesel engine
Optional on demand:
- Nr. 4 swinging Jacklifts;
- Sound proofing for diesel engine;
2qsthi
Shear baler mod. SMART available in the following configurations:
SMART 2535
compression box length: 5000 mm;
Shearing force: 350 Ton;
Bale's dimensions: 500 x 400 mm x Variabile
Remote control
Powered by Electric motor or Diesel engine;
SMART 66-55 DT
compression box length: 5000 mm;
Shearing force: 500 Ton;
Bale's dimensions: 600 x 600 mm x Variable
Remote control
Hdpx7v2
Transportable (equipped with Nr. 4 swinging Jack lifts);
Powered by Electric motor or Diesel engine;
The above machines...
Baler mod. CONDOR with 2 longitudinal compression cylinders:
Available in several models:
CONDOR-R
8umigeh20
Bale size: 800 x 600 mm x Variable;
Compression box length: 5000 mm ;
Remote control;
Power unit: electric or diesel version;
CONDOR-62
Bale size: 900 x 700 mm x Variable;
Compression box length: 6100 mm;
Remote control;
Power unit: electric or diesel version;
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.