Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Hpodpox H R U Sjfx Ad Toa Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm Hodpeb A Ii Sofx Ad Tspa -side threaded ratchets for skip containers -Functionally tested

Condition: used, Year of construction: 2003, Lot consists of: (1) Baling press Technical Details: Hjdpfx Adsx E T R Hs Topa 4kw

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2021 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cartons The baler is in very good condition. The operating manual is included. Hpsdpfx Adjx E Td Ho Tja Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information given or for any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical baler HSM 45 VL for SALE/RENT! Manufacturer: HSM Model: 45 VL Year of manufacture: 1995 Total available: 8 units. Sale price: €1,200 per unit (ex works Lithuania) Hedpfxox H Skbj Ad Tepa

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 610.01.030, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, functionally tested, repaired, and equipped with a new control system according to EN16500 standards. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Model: PP 1207 Bale size (LxWxH): 1180 x 700 x 800 mm External dimensions (LxWxH): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 400 mm Pressing force: 59 t / 580 kN Throughput capacity: 1 - 2 bales/hour Hpsdou Aa Tnepfx Ad Tja Number of banding channels: 4 Weight of press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors under cover Including starter set of 19mm bale strapping Serial number: 610.01.030 Year of manufacture: 2004

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Weight 3000 kg Total power requirement 33,5 kw Hpsdpfx Asvz Ex Nod Tea

Condition: new, Year of construction: 2025, Only one machine still available for immediate delivery! Delivery in December 2025 still possible. Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Hpsdov Rpxljpfx Ad Tea Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm in chip length Moisture content 6–12% (absolutely dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for longer than 2.5 hours at a stretch, optional cooling must be installed.

Condition: used, Year of construction: 2005, Lot consists of: (1) Baling press Hpjdpfex E S Udex Ad Toa Technical Details: 4kw

Condition: good (used), Year of construction: 2019, functionality: fully functional, Incoming Baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Hpedpjx E Tdgofx Ad Toa Materials: Paper, cardboard, carton The operating manual is available. Please note: All technical data refer to the manufacturer's information. We assume no liability for the information provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Hjdpfxox Hz Hlo Ad Topa Condition: very good! Functionality thoroughly tested. FLITS Rental & Sales service: with every machine, we supply a bundle of binding wire (120 wires). Do you need additional bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you can count on speed, transparency, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us to provide comprehensive information and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 610.01.588, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The indicated price is exclusive of statutory VAT, ex works, and without packaging. The press has been cleaned, function-tested, repaired, and fitted with a new control system in accordance with EN16500. All replacement parts used are genuine Strautmann original parts. Technical specifications: - Manufacturer: Strautmann Umwelttechnik - Model: PP 1207 - Bale size (LxWxH): 1180 x 700 x 800 mm - External dimensions (LxWxH): 1838 x 1059 x 2871 mm - Transport height: 2050 mm - Feed opening: 1190 x 600 mm - Pressing force: 59 t / 580 kN - Throughput: 1 - 2 bales per hour - Number of strapping channels: 4 - Press weight: 2,300 kg - Power supply: 400 V / 50 Hz - Power consumption: 4 kW - Installation location: indoors / outdoors under cover - Including start set of 19 mm baling tape Hpedpov Rzwmofx Ad Tea - Serial number: 610.01.588 - Year of manufacture: 2005

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Hpedpfxsvz Eqlo Ad Tea Total power requirement 8 kw

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Hpsdpfx Adox D U N So Tja Year of manufacture: 2012

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Hpodex Dnb Ujpfx Ad Tja Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of Manufacture 2016 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of Manufacture: 2016 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Hjdjx E Tcvspfx Ad Tepa Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any potential errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, pressing force: 26 t, Baler ORWAK Compactor 3325 Hpodpox Hfi Refx Ad Toa Pressing force: 26 tonnes / 260 kN Year of manufacture: 2023 Very good condition!

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 plus Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Functionality checked. FLITS Rental & Sales Service: Each machine comes with a bundle of baling wire (120 wires). Need additional bundles of baling wire? Request a free quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machinery for both businesses and private customers. We focus on providing efficient solutions for materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a wide range of machines suitable for use in various sectors. Check our listings for: balers for efficient waste processing, electric pallet trucks/stackers for fast and safe materials handling, scrubber dryers for thorough and professional floor cleaning, forklifts in a variety of models suitable for different work environments. With FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. Hsdjx E Skxopfx Ad Topa Do you have questions or would you like a free quote? Feel free to contact us. Waste baler, paper baler, cardboard baler, plastic baler, waste compactor, recycling, textile press, waste, waste processing

Condition: like new (used), Year of construction: 2017, functionality: fully functional, pressing force: 5 t, Fully equipped, ready to use! Works perfectly. Hpsdpfx Adox E Ad No Tea

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Hpsdpfx Adexnzf Is Tsa Bale weight: 200–350 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Incoming Bale Press Dixi 60 SLD, Year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: Hpedpfx Adjx E Tcce Tea All technical data is based on information provided by the manufacturer. We accept no liability for the accuracy of the details provided or for any errors. This offer is subject to change without notice and may be withdrawn or sold at any time. Inspections are available by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Presto CC 40 M Baler Technical Data: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput at bulk density of: 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film Hpodpfexuq E Dox Ad Toa The baler is in good condition. Operating manual and CE declaration are available. Note: Channel discharge is fully automatic and adjustable. Please note: All technical data are as stated by the manufacturer. We accept no liability for the information provided or for any errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Inbound: Vertical Baling Press HSM V-Press 1160 plus, Year of Manufacture 2019 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Stock No.: 9969 Year of manufacture: 2019 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Hedpfox E S Anjx Ad Topa Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, Cardboard, Film Instruction manual is available. Please note: All technical data is based on the manufacturer's information. We do not assume liability for the specifications provided or for any potential errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex-location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Baler Avermann, Model AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Specifications: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Hodpfx Aox Dkkxsd Tspa Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (L x W x H) Machine weight: approx. 18,000 kg Remarks: The press is still in operation and can be inspected upon request. It is expected to be available from February 2026. A suitable WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional images available upon request. Please feel free to contact us. Please note: All technical data are based on manufacturer’s information. We do not accept liability for any errors or omissions in the provided specifications. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, prepaid, without guarantee or warranty.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical baler HSM VL 600, year of manufacture 2002 Technical data: Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Hpodpfx Adjx A Ur De Toa Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Machine weight: 3575 kg Materials: Paper, cardboard, film Note: The operating manual is available. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the accuracy of the information provided or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex location, without warranty or guarantee. Our payment terms are 100% advance payment.