Used Trumpf Trubend 5170 for sale (378)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected under power until 04/05/2026! TRUMPF TruBend 5170 including BendMaster! The machine has been regularly serviced and maintained exclusively by Trumpf with a complete service history. The hydraulic cylinders are leak-free and show no oil loss. All robot tooling shown in the pictures is included. TECHNICAL DETAILS Stroke: 500 mm Pressing force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, upper and lower Number of axes: 6 Payload: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected load: 28.0 kVA Control voltage: 24 V DC Overrun time: max. 90 ms Overrun distance at 220 mm/s: max. 10 mm Overrun distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg EQUIPMENT CE marking Documentation/manual Back gauge with sensor technology CNC crowning CNC tool displacement BendMaster (robot on 8 m rail) Vacuum manipulators CNC regripping station Double sheet detection Safety device BendGuard Lasersafe Hnjdpfx Agsy Hqc Ne Iol Spare parts: cable drag chain, spare vacuum suction pads, BWF machine mounts (machine feet)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Hydraulic Press Brake Make: TRUMPF Model: TruBend 5170 Very good condition, year 2016 The machine is from first ownership and was used only very little in a small operation. The metalworking company is closing due to retirement. Therefore, all tooling (see photos) will also be included in the sale. The machine is located near Stuttgart and is expected to be loaded in week 25/26. Technical Data Manufacturer: TRUMPF Model: TruBend 5170 Year of manufacture: 2016 Working length: 3230 mm Pressing force: 170 t Weight: 12,200 kg Connected load: 28 KVA Clear gap between uprights: 2690 mm Throat depth: 420 mm Table width: 180 mm Installation height: 615 mm Stroke: 445 mm Upper tool height: 110 – 390 mm Ram closing speed: 220 mm/s Dimensions (LxWxH): 5.10 x 1.90 (+ 0.8 m) x 3.05 m Weight: 12.2 t + tooling package Equipment: - Control: TRUMPF TASC 6000, 15" TFT display - Interfaces: parallel, RS 232, USB, Ethernet - 2 adjustable support arms - 1 CNC-controlled bending aid incl. park position right - Electrically closable rear safety guard - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping upper and lower incl. front LED lighting - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light curtain (for 220 mm/s) - Documentation - Very large tooling package as per photos, incl. adapter for Amada tooling system Hedpfjy Rngmjx Ag Isnl All information without guarantee. The machine is still in the seller's premises near Stuttgart and can be inspected under power by arrangement. This is a very small business that is now closing due to retirement.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: B1505I0180, functionality: fully functional, operating hours: 6,314 h, input voltage: 400 V, stroke length: 445 mm, operating speed: 1,000 mm/s, reverse speed: 220 mm/s, table height: 1,095 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 3,000 mm, overall weight: 14,150 kg, controller manufacturer: Trumpf, controller model: Touchpoint TruBend, working width: 3,230 mm, bending force (max.): 173 t, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: hydraulic, Equipment: CE marking, We are offering this Trumpf TruBend 5170 press brake in very good condition, year of manufacture 2018. Manufacturer: Trumpf Model: TruBend 5170 Hnsdeyu Sg Rspfx Ag Ijl Year of manufacture: 2018 Technical condition: very good If you have any questions or need further information, please contact us by message or phone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 9,874 h, stroke length: 600 mm, throat depth: 420 mm, working width: 4,250 mm, bending force (max.): 173 t, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Hydraulic tool clamping (top/bottom) Die adjustment for bending Hodpfx Agex R S S Hs Ijnl CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Hnedjy Shc Dopfx Ag Iol

Condition: good (used), Year of construction: 2012, TruBend 5050 Hsdpfx Agoy Shcde Ienl

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Hnjdewykccepfx Ag Iol

Year of construction: 2010, condition: like new (used), Used Trumpf Trubend Series 3000 CNC pressbrake for sale VIDEO BELOW: Used Trumpf Trubend 3120 for sale 3metre x 120ton 6 axis plus pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3120 Type: CNC hydraulic Press Brakes New 2010 Location: United kingdom Low hours – 14,000 Specification Convert Specs to Imperial Tonnage 119.749 t / 120ton Type: hydraulic downstroke Overall Length 3.1 m /3metre BH 2.7 m Stroke 199.9 mm Number of axis: 7 axis 5 axis back gauge Weight 18298 (LBS) Control CNC (T3000) 132 Ton X 10′ Trumpf TruBend 3120 CNC Press Brake Year: 2010 Specification from new: Machine – Stable machine frame as welded all-steel construction – Ram, highly resistant to torsional forces – Spherical ram suspension, with ram tilt – Electro-hydraulic downstroking drive with 4-cylinder technology – Proportional valve technology – Modern block hydraulics – Electronic pressure balance – Measuring system with glass scale and frame deflection compensation – Hydraulic oil filled in the machine (lifetime lubrication) – Oil cooler Backgauge System – Backgauge system 2-axes with rack and pinion-drive for X- and R-axis, – 2 pieces back gauge fingers with safe adjustment in front of the machine Tool Holder – TRUMPF Upper tool clamping, manual and hardened – Lower tool clamping, manual and hardened Crowning – Self-regulating crowning system – Additional hydraulic CNC-crowning Control – Machine control: T3000 colour, DELEM based on Real Time for Windows – USB interfaces for keyboard, mouse, etc. Safety – Footswitch for Emergency up, down and emergency stop – Safety equipment: Side doors and manual shutter roller at the rear Services – Installation, start-up and instruction Options for Backgauge System – Back gauge system 5 axis Hnjdohtm Ikjpfx Ag Iel Options for Tool Holder – Amada US Style fast clamping of upper tool holders (segmented, on entire working length) Options for Safety Device – BendGuard Options for Material Handling – Support bracket (2 pc) Delivery – June 2011 Video below: Used Trumpf V and C series cnc pressbrakes also available in stock for sale. We are always interested in buying used Trumpf pressbrakes and machines such as: TruBend 3066 TruBend 3100 TruBend 3170 TruBend Series 5000 TruBend 5085 Trubend 5130 TruBend Series 7000 TruBend 7050 TruBend 7036 TruBend 7050 TruBend Series 8000 TruBend 8230 Trubend 8400

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Hodpfx Agow Eilyo Ionl Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 37 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: TRUMPF TASC 6000 (15") Hnsdpfsx D D Hysx Ag Isl • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change Hjdoy Saq Tspfx Ag Isnl - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: used, Year of construction: 2011, pressure 36 t Hjdpfx Agoy Ig Rro Ionl chamfer lenght 1020 mm distance between columns 932 mm throat 150 mm stroke 120 mm useable dayligth 295 mm Y-working travel 10/25 mm/sec Y-rapid travel 220 mm/sec work height max. 1150 mm weight of the machine ca. 2.600 kg dimensions of the machine ca. 1805x1330x2380 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Accessories: - Light barrier Hnjdpfxjy Igbds Ag Ijl - Foot switch - Side safety doors - Wila tool clamp - Trumpf TASC 6000 control - 6-axis backgauge

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Hedpfxeyz Rwis Ag Ienl Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 42,200 h, pressing force: 130 t, table length: 3,230 mm, clearance between the columns: 2,650 mm, total length: 3,980 mm, total width: 1,900 mm, total height: 2,840 mm, overall weight: 10,200 kg, control type: CNC control, Hello, We are selling Trumpf TruBend 5130 CNC press brake, tooling included.. Hnsdjy Nd I Rspfx Ag Isl 130t/3meter CNC bending machine, 4-axis back gauge, CNC crowning, TASC 6000, Willa hydraulic clamping, Tooling included, priced aprox. 10000€ Lower die 16mm - 3m - sectionized for 30° 50mm - 3m - sectionized 80mm - 515mm Upper Tool finer height 200mm, radius of 1mm, for 30° - 3m - sectionized, for thicker plates height 20mm, radius 3mm - 600mm - sectionized Feel free to contact.

Condition: like new (used), Year of construction: 2008, machine/vehicle number: B0502A0308, functionality: fully functional, operating hours: 1,520 h, pressing force: 85 t, overall weight: 7,800 kg, controller manufacturer: KEBA, controller model: TASC 6000, control type: CNC control, Equipment: CE marking, documentation/manual, For sale: used TRUMPF TruBend 5085X press brake, year of manufacture 2008. Hsdsy Hpnqepfx Ag Ionl The machine is in exceptional technical condition – LIKE NEW! In January 2026, TRUMPF Poland service replaced all filters and oil, performed calibration, checked operational accuracy, and conducted safety tests. The machine has a low number of operating hours – only 1512 hydraulic hours! Hydraulics: Hoerbiger Year of manufacture: 2008 Maximum press force: 850 kN Working length: 2210 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control: TASC 6000 Increased installation height 5-axis backgauge – X, X5, R, Z1, Z2 Hydraulic upper tool clamping WILA Hydraulic lower tool clamping WILA CNC crowning BendGuard Prepared for ACB If you have any questions or need additional information, please send us a message or call us.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 26,000 kg, Trumpf TruBend Center 5030 Hnjdpfjy E N Hkox Ag Isl

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 9,000 h, stroke length: 350 mm, overall weight: 8,300 kg, working width: 3,100 mm, bending force (max.): 100 t, Equipment: CE marking, A ready-to-use TRUMPF TruBend 3100 press brake from 2017, in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine features a maximum press force of 100 tons and is equipped with an advanced control system with graphical visualization. It has only 9,000 operating hours on the clock. Extra benefit: upon purchase, we offer one week of training at our facility, ensuring you can start working immediately and efficiently. Key specifications (2017 model): Hjdpfjybax Uox Ag Ienl - Press force: 1,000 kN - Bending length: 3,060 mm - Distance between uprights: 3,384 mm - Usable installation height (+extra option): 500 mm - Controlled axes: standard 4 axes (Y1, Y2, X, R) - Backgauge system: fast and precise CNC backgauge - Control system: TRUMPF T3500T with 3D color/graphical visualization Main options and features: - Increased installation height: provides a 500 mm opening for complex/tall components - Tool clamps: hydraulic tool clamping systems for rapid setup - Bending aids: maximum two height-adjustable bending aids (lifting capacity up to 150 kg) for handling large parts - Safety system: BendGuard automatic laser field monitoring - LED lighting: LED work area lighting in front and rear - Software: DXF import for 2D programming We also provide the machine's maintenance history and an overview of replaced parts, such as the BendGuard. The last maintenance was carried out in August 2025. For further information or any questions, feel free to contact us.

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment Hodpsyy Hgqsfx Ag Ijnl :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK - Block laser OK - Illumination (auto) OK - Line laser Not OK Hnedpfx Aeyytuheg Ijl I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Manufacturer: TRUMPF Model: TruBend 5085 Year of manufacture: 2008 Product number: F1025K Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm Hnsdpsyxdv Hjfx Ag Ijl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Pannellatrice Trumpf modello 7030 anno costruzione 2016 installazione maggio 2017, macchina completa di tutti gli optional compreso angolo di piega laser ACB sistema di programmazione Tec Zone, disponibilità immediata Hnedpfx Agsyw Uggo Iel

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Hjdpfxsx D E N Aj Ag Ienl Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system Hnjdpfsx Imqlsx Ag Ijl • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Additional equipment • Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Machine Benefits Technical Machine Benefits Hedpfx Agox D Hb Hj Ienl • Press force: 500 kn • Bending length: 1275 mm / free column clearance: 1040 mm / installation height: 385 mm • The machine was serviced annually by trumpf. • Trumpf maintenance contract.