Used Trumpf Tlc 1005 for sale (386)

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles Fpsdpou N I Erefx Abgep - Laser welding

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, 1 burning head, laser power 4 KW, Fjdpfxsvbdy Ej Abgspp Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, Predecessor model of the more popular TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice a year by Trumpf UK) Last service: January 2019 New vacuum pump installed: May 28, 2019 Working area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotation axis): +100° C-axis (rotation axis): n x 360° Laser source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Available (for programming support) Control & software CNC control: Siemens 840D with 3.5" floppy disk drive Network connection: Available (including analog modem for Remote maintenance) Software: ToPs 100 with nesting module & IGES Translator + ToPs 800 with fixture construction & 3D IGES Translator MACHINE DETAILS Fjdpfxsvy Ehzs Abgopp Beam switched on: 14,922 h Laser switched on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed water cooling with air circuit - 5” high-pressure cutting optics - Set-up device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary work table

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 3,149 h, controller model: Sinumerik 840 D sl, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been regularly serviced by Trumpf (most recently in May 2024). The machine has only 3,149 beam hours! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Positioning Accuracy Average positional variation on sheet metal: ±0.03 mm/m Positioning deviation Pa on sheet metal: ±0.1 mm/m Fedpfoxrk Imex Abgjpp Smallest programmable increment: 0.001 mm MACHINE DETAILS Control: Sinumerik 840 D sl Laser power: 3,200 W Footprint & Weight Footprint (L x W): 6,500 x 7,600 mm Weight: 12,000 kg Operating Hours Laser on-time: 13,378 h Laser beam-on hours: 3,149 h EQUIPMENT Two cutting heads Various spare parts Extraction system Manually extendable loading and unloading table Note: 2x TruTops software licenses can be purchased separately.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 25,000 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 114 mm, No reserve price – guaranteed sale to the highest bidder! Fpjdpfx Aext Evnsbgep Regularly serviced laser cutting machine with comprehensive accessories! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 114 mm Laser power: 4,000 W Working area: 3,000 mm Max. material thickness: 20 mm Xp stroke: 300 mm (max. 305 mm) Max. positioning speed parallel to axis: 120 m/min X-axis positioning acceleration: 9 m/s² Xp + Y-axis: 15 m/s² Cutting speed X-axis: 4 m/s Cutting speed Xp and Y-axis: 15 m/s MACHINE DETAILS Control: Sinumerik 840D control Dimensions & Weight Dimensions: approx. 9,300 x 4,600 x 2,000 mm Weight: approx. 11,500 kg Laser hours: 25,000 h EQUIPMENT Cooling unit Automatic pallet changer Enclosed beam guide NitroLine high-pressure cutting FocusLine constant focal position Compressed air cutting PierceLine for reduced piercing time PlasmaLine plasma sensors SprintLine for rapid processing LensLine FlyLine ContourLine for small hole production Micro welding Spray device (unused/virgin) Positioning laser diode Programmable cutting gas pressure Automatic shut-off Work area lighting TruTops Laser lite CO2 laser TruFlow 3200 with high-frequency excitation Mirror telescope and maintenance-free turbo radial blower Laser control TASC 3 with logbook function and cooling unit Laser cutting head with 5" and 7.5" lenses, quick-change system ControlLine capacitive height monitoring and process control Error causes via diagnostic functions Additional laser cutting head with 3.75" lens for high-speed cutting Pallet changer system Note: The Trumpf LoadMaster shown in the photos is not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 11598, controller model: SIEMENS 840D, laser power: 2,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TRUMPF laser cutting system including LoadMaster! Submitting a bid requires collection by the deadline at the end of November! TECHNICAL DETAILS Axes X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Working area: 3,000 x 1,500 mm Laser and Power Laser output: 2,400 W Laser unit: TLF 2400 TURBO MACHINE DETAILS Control: SIEMENS 840D Electrical Data Mains connection: 400 V / 50 Hz Fpodpfjxu Ihijx Abgep Connected load: 71 kVA Control voltage: 24 V Main fuse: 3 × 125 A Compressed Air and Gas Connections Compressed air connection: 6 bar Nitrogen (N₂) connection: 30 bar Oxygen (O₂) connection: 20 bar Dimensions & Weight Dimensions (L x W x H): 9,800 x 5,300 x 2,000 mm Weight: 11,500 kg EQUIPMENT LoadMaster

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 20-10-03-A105, TRUMPF TruDisk 5001 (6 C) – High-Power Solid-State Laser with KLH Chiller RW 20/0 SK Description: Powerful laser system comprising a TRUMPF TruDisk 5001 (6 C) high-power solid-state laser and the compatible KLH chiller unit RW 20/0 SK. This system is designed for continuous industrial operation in automated manufacturing environments. Ideal for applications such as laser welding, cutting, or cladding. Technical Data – Laser (TRUMPF TruDisk 5001 (6 C)) Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Type: TruDisk 5001 (6 C) Equipment No.: L4211M2236 Serial No.: 20-10-03-A105 Year of manufacture: April 2017 Fedpfx Abexv D Alsgjpp Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3-phase AC + PE Power consumption: 28 kW / 29.5 kVA Rated current: 42 A / 400 V Frequency: 50 – 60 Hz Protection class: IP 54 Weight: 820 kg CE marking: available Technical Data – Chiller (KLH RW 20/0 SK) Manufacturer: KLH Kältetechnik GmbH, D-18209 Bad Doberan Type: RW 20/0 SK Model number: 0393710 Serial No.: 17KLH00670 Year of manufacture: 2017 Output: 10.2 / 12.9 – 20.4 / 21.5 kW Voltage: 400 / 460 V Frequency: 50 / 60 Hz Refrigerant: R134a (3.7 kg) – hermetically sealed system Max. operating pressure: 20.5 bar CE marking: available Degree of Automation: Suitable for fully automated production plants. The TruDisk 5001 laser is engineered for integration into robotic systems, CNC machines, and automated production lines, and can be fully networked into control systems via fieldbus or Ethernet interfaces.

Condition: excellent (used), Year of construction: 2005, Operating hours: approx. 15,000 h Fjdsxvqc Sspfx Abgjpp

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. Fedpjuhm E Sjfx Abgjpp - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Fsdpfx Asxu Rwgjbgepp Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 85 t Bending length: 2750 mm Distance between uprights: 2260 mm Total power requirement: 17 kW Machine weight approx.: 8,300 kg Fodjxu Nagepfx Abgspp Space requirement approx.: 3800 x 2300 x 2400 mm Operating hours: 80,005 h

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Fsdpfxsxur Iae Abgopp Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, Including basic set of tools. Lisovací síla 130 t Délka ohranění 3060 mm Vzdálenost mezi stojany 2690 mm Zdvih 365 mm Fpjdpfx Aoxuqfkobgsp Rozměry stroje dxšxv 3640x2060x2885 mm Hmotnost stroje 12950 kg

Condition: excellent (used), Year of construction: 2018, Resonator: 6 kW Fodpfxexvqb Uj Abgepp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Fpodpfx Aboxlctzjgep Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Year of construction: 2010, condition: ready for operation (used), Movement X-Axis Movement 6500 mm Fpodpfoxuw Dgjx Abgep This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. Application Types Cutting

Condition: used, functionality: fully functional, Year of construction: 2010, Table length: 3000 mm Table width: 1500 mm Control: Siemens Sinumerik 840 FL Max. workpiece weight: 1800 kg Laser power (watts): 4000 Fpodpfx Absxu I Trogep Sheet thickness (steel): 22 mm Sheet thickness (stainless steel): 20 mm Sheet thickness (aluminum): 20 mm Sheet thickness (copper): 8 mm Total power requirement: 53 kW Approx. machine weight: 12,000 kg Operating hours: Beam ON: 32,569 h Laser ON: 78,133 h

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation Fpjdpfxow I Rq Io Abgop - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 50,115 h, MACHINE DETAILS Laser power: 2700 W X-travel: 2585 mm Fpodpett Nr Tefx Abgjp Y-travel: 1280 mm NC: 50115 h Laser ON: 49819 h Beam time: 12287 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: excellent (used), Year of construction: 2008, Operating hours: approx. 20,000 h Fpjdpfx Abexvqawegep

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Application Types Fpsdpexuld Uefx Abgjp Cutting

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety Fpsdpowlifmjfx Abgsp - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Fedpfsu S Ny Tox Abgspp Very good condition

Condition: excellent (used), Year of construction: 2018, Operating hours: 19,000 h Fodpfx Asxvp Tpobgjpp

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection Fpedpstpguzjfx Abgop + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4