Used press brakes with 150-199t bending force for sale (164)

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Ibodpfxorq D Nio Afuea The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 160 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31160 CNC Press Brake The Baykal APHS PRO 31160 is a CNC-controlled press brake with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser protection (AKAS / LCII), and a CNC-controlled crowning table. Operation is via a Cybelec 2D CNC control unit. Technical specifications: Press force: 160 t Bending length: 3,100 mm Bending length between uprights: 2,550 mm Throat depth: 410 mm Table height: 870 mm Max. ram stroke: 260 mm Motor power: 15 kW Oil tank capacity: 180 l The 2-axis backgauge (X-R) is driven by AC servo motors and provides a positioning accuracy of ±0.03 mm. Travel range: X = 1,000 mm; R = 160 mm; travel speed: 330 mm/s. Two laterally adjustable stop fingers are included. Equipment: - Cybelec 2D CNC control - Fiessler AKAS / LCII laser safety - Automatic motorized crowning table (WILA system) - Segmented upper tooling, Amada system - Manual quick-release clamping system Promecam / AMADA - 2 front sheet supports, laterally adjustable - Central lubrication - Operating hours counter - CE compliance Machine details: Year of manufacture: 10/2025 Isdpfsyrf Upox Afusba Serial number: 31865 Dimensions (L×W×H): 3,820 × 1,800 × 2,700 mm The machine is in stock and available for immediate delivery. Warranty: 12 months for single-shift operation.

Condition: new, Year of construction: 2025, neu 2025 080112 prompt, Zwischenverkauf v Türkei Ibedpfx Aswiranefuoa 86376 € 1438.29 € 1 76100 € 175 to 3050 mm Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 10WEEKS): Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, pressure: 175bending length: 4050column width: 3550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 4790x2290x3030weight approx.: 13,2504 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Ijdpfxed Ehidj Afujba

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Ibodpfsd Etf Esx Afuea

Condition: new, pressure: 175bending length: 3020column width: 2550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 3700x2230x3025weight approx.: 12.0504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard Equipment: KKI EUROPA XL CNC Press Brake by KK-IndustriesKK-Industries proudly serves as the official representative of the DENER Group, offering a high-quality model tailored for the European market. The KKI EUROPA XL CNC Press BrakeThe KKI EUROPA XL, manufactured by DENER, is a robust and highly precise press brake designed for universal applications. With its superior installation height and extended stroke, the EUROPA XL is built to meet the demands of a wide variety of tasks. Its large projection minimizes limitations, ensuring a versatile and efficient operation. Quality and PrecisionAt KK-Industries, we prioritize quality, and this is evident in the exceptional features of the EUROPA XL. The press brake comes equipped with the DELEM DA 66 T control system as standard, offering intuitive operation and advanced functionality. The EUROPA XL features CNC axes (Y1, Y2, X, and R) as standard, enabling precision control over every aspect of the bending process. The CNC crowning system, integrated into the DELEM DA 66 T, ensures optimal alignment and consistent results across all bends. Iodpfjfrvw Isx Afueba Top-Quality ToolsIn addition to the advanced control system, we ensure that the KKI EUROPA XL is equipped with the finest tools available. The upper tool and die are sourced from EUROSTAMP in Italy, guaranteeing outstanding quality and durability for every application. Service ExcellenceAt KK-Industries, we understand that a machine is only as good as the service it receives. That’s why we prioritize highly qualified personnel with extensive experience in CNC sheet metal working. Our team ensures that your KKI EUROPA XL operates at peak performance and receives the support it needs to excel.

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations. Iodpfx Aov S Npyjfueba

Condition: new, More technical data on request                    Vertrauen Sie auf das Maschinenservice von KK-Industries GmbH                 Die Lebensdauer einer Maschine hängt entscheidend von  Wartung und Pflege ab. Nur wenn Maschinen ordentlich gewartet werden,  lassen sich diese auch jahrelang weitgehend uneingeschränkt nutzen.  KK-Industries hat deswegen für Sie einen optimierten Maschinenservice  ins Leben gerufen, von dem Sie als unser Kunde profitieren. Unser  Service-Team, das für Sie den Maschinenservice stemmt, setzt sich aus  hochqualifizierten Experten zusammen, die ausgesprochen professionell  arbeiten. Für uns ist es eine Selbstverständlichkeit, dass Sie bei uns  ausschließlich Maschinen erhalten, die qualitativ absolut hochwertig  sind. Ergänzt wird dies durch unseren exzellenten Service, der von  Anfang durch seine Kundenorientierung auffällt. Leistungen unseres Kundendienstes im Überblick Mit  unserem Maschinenservice bietet Ihnen unser Kundendienst ein gelungenes  Angebot verschiedener Leistungen, das Sie flexibel in Anspruch nehmen  können. Wir führen für Sie Inbetriebnahmen und Ersatzbestellungen durch.  Darüber hinaus bieten wir unter dem Dach von unserem Maschinenservice  Einschulungen, Servicearbeiten und Instandsetzungen an. Auch  Sicherheitsprüfungen werden durch unsere Fachkräfte durchgeführt.  Verlassen Sie sich bei unserem Maschinenservice darauf, dass wir nur mit  gut ausgebildeten Servicetechnikern arbeiten. Sie können in der Branche  auf jahrelange Erfahrung verweisen. Maschinenservice   für: Blechbearbeitungsmaschinen Abkantpressen, Tafelscheren,  Laser ..   Accurl, Adira, Amada, Atlantic, Baykal, Boschert, Bystronic Beyeler,  Dener, Durma, Durmazlar, Ermaksan, Farina, Gasparini, Gecko, Haco, MVD,  HMP, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Warcom... Sichern Sie sich langfristigen Erfolg Unsere  ausgebildeten Servicetechniker garantieren Ihnen bei unserem  Maschinenservice ein hohes Niveau. Wir bauen auf einen guten Service,  hohe Qualität und Flexibilität. Mit dieser können wir uns an Ihren  Wünschen orientieren. Uns ist es wichtig, dass Sie mit unserem  Maschinenservice absolut zufrieden sind. Dabei liegt es uns am Herzen,  dass Sie sich für eine langfristige Partnerschaft mit dem Team von  KK-Industries entscheiden. Damit ihre Kosten überschaubar bleiben, haben  wir unseren Maschinenservice für Sie besonders günstig gestaltet. Unser  Maschinenservice ist die perfekte Ergänzung zu unserem  Maschinenangebot. Vertrauen Sie auf unsere Erfahrung und setzen Sie auf  Servicemitarbeiter, die ihrer Aufgabe mit Leidenschaft nachgehen. Siehe unseren Monteuranforderungsschein: Ibjdpfod N Swpsx Afusa Ich hoffe auf eine gute Zusammenarbeit Mit freundlichen Grüßen KK-Industries GmbH Klaus Kletzer     Abkantpresse  Tafelschere Schweißtisch Laserschneidanlage Hydraulikpresse  Werkstättenpresse Gebrauchtmaschine Blecheinrollmaschine Bandsäge  Ausklinkmaschine Bohrmaschine Exzenterpresse Profilstahlschere  Stanzmaschine Nibbelmaschine Schwenkbiegemaschine Kreissäge  Rohrbiegemaschine Langabkantmaschine Winkelbieger Bördelmaschine  Drehmaschine Breitbandschleifmaschine Schleifmaschine Falzformer  Fräsmaschine Spaltanlage Längs- und Querteilanlage Entgratungsm

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Ibedpfx Afed Etf Djusa

Condition: new, pressure: 175bending length: 3200column width: 2700daylight: 430stroke lenght (max.): 200column throat depth: 400messurements (LxWxH): 4200x1900x2700weight approx.: 10.000 Ibjdpfx Aod Aklljfusa

Condition: excellent (used), Year of construction: 2001, pressing force: 150 t, stroke length: 265 mm, throat depth: 330 mm, Hydraulic press brake Fab. Plague guy. QPB-M6 Year of manufacture 2001 Technical data Make: Placke Type: QPB-M6 Ibedovw Triopfx Afuja Year of manufacture: 2001 Pressing force: 150 t Bending length: 3100 mm Thrust: 330 mm Push stroke: 265 mm Installation height 665 mm Connected load: 16 KW Rapid traverse 150 mm/s Working speed 9.8 mm/s Retraction 100 mm/s Operating pressure 300 bar Dimensions: L 3.4 x W 2.0 (+ support arms) x H 2.9 mm Weight: 10.5 t Equipment - Control: Delem DA65 2D graphics - 4-controlled axes: X, R, Y1, Y2 - 2x support arms, can be moved sideways and in height adjustable - 2-hand control panel - Hydraulic upper and lower tool clamping - CNC-controlled crowning, WILA - Tool package: Upper tool straight, H 160mm, L = 2,700mm, sectioned Lower tool V15, L = 2,400mm, sectioned All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table Iedsgu N Alspfx Afujba All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: ready for operation (used), machine/vehicle number: 22613, functionality: fully functional, stroke length: 400 mm, throat depth: 300 mm, bending force (max.): 200 t, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Operating manual Ijdjygw Azspfx Afujba

Condition: used, Year of construction: 1983, pressure 180 t chamfer lenght 3050 mm distance between columns 2550 mm throat 250 mm stroke 150 mm return speed 65 mm/sec ajustment speed 50 mm/sec work height max. 1010 mm oil volume 150 l total power requirement 11 kW Ibjdswa Dyzjpfx Afuoa weight of the machine ca. 9500 kg dimensions 3100 x 1750 x 2850 mm Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device - Foot control

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard Ibjdev S Iryopfx Afusa - Foot switch

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Ibjdjygw Ahopfx Afuea Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display Ibedpfst I D U Eox Afusa - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge Ibjdpfxjxabfxo Afuea - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec return speed 135 mm/sec work speed 10,0 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90,0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15,0 kW weight 11.950 kg range L-W-H 5100 x 2150 x 2850 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC Ijdpfx Aexabapefueba - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine Ibjdjxab Hijpfx Afusa - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Condition: used, Year of construction: 2008, pressure 180 t chamfer lenght 3110 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 210 ltr. operating pressure max. 240 bar control DELEM total power requirement 15.0 kW weight of the machine ca. 11.200 kg. range L-W-H 4250 x 2000 x 2800 mm Current new price approx. 85.000 euros Special price on request Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model “DA 66W” * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality LCD screen (TFT) * Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electric motor-driven backgauge (X axis) * with 2x manually adjustable stop fingers Ibsdpsxa Hivjfx Afusa - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder - 2x front, sliding support arms (“sliding” system) - Side guard (swivel doors) - Rear guard (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF)

Condition: new, pressure 135 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm Ibjdpsxaa U Eofx Afuea table height 900 mm oil volume 300 ltr. voltage 400 Volt total power requirement 15.0 kW weight 10800 kg range L-W-H 5100 x 2100 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 160 t chamfer lenght 3760 mm distance between columns 3250 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/min return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm oil volume 200 ltr. voltage 400 Volt weight 8514 kg range L-W-H 4910 x 1900 x 2550 mm Ibodexabb Tepfx Afuja Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 12100 kg range L-W-H 5.100x2.150x2.850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) Isdpoxaah Sofx Afusba - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm Iedpfexcp Rbex Afueba dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions