CNC Press brake HAP 3050 x 170 to
HAP 170 30/25

Year of construction

2025

Condition

New

Location

Türkei

CNC Press brake HAP 3050 x 170 to HAP 170 30/25

Show map

Machine data

Machine type:: CNC Press brake HAP 3050 x 170 to

Model:: HAP 170 30/25

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Türkei

Call

Details about the offer

Listing ID:: A5795529

Update:: 02.01.2025

Description

Delivery ex works Turkey

Bending length (A): 3050 mm
Press force: 170 tons
Sheet thickness 42kgf / mm: 8 mm
Sheet thickness 72kgf / mm: 4 mm
Upper tool: 1260 Top Tool 85 °
Lower tool: 50, 35, 22, 16
Distance between columns (B): 2550 mm
Forward speed: 130 mm / s
Working speed: 8 mm / s
Retraction speed: 120 mm / s
Crowning: manual (CNC-motorized available for an extra charge)
X-axis travel: 750 mm
X-axis speed: 250 mm / s
Backgauge fingers: 2 pieces
Front support arms: 2 pieces
Oil tank capacity: 180 liters
Main motor power: 11 kW
Stroke length (C): 265 mm
Nedpjgu N Alsfx Ah Hekt
Installation height (D): 450 mm
Projection stand (E): 410 mm
Table height (F): 870 mm
Table width (G): 170 mm
Length (L): 4200 mm
Height (H): 2800 mm
Width (W): 2200 mm
Weight: approx. 7500 kg
Cybelec Cybtouch 12 2D Graphic CNC control
3 axes (Y1, Y2, X) expandable with optional R+Z-Axis
Eurostamp 2067 lower tool (V: 50, 35, 22, 16)
Eurostamp 1260 upper tool 85 °
Narrow table
All-steel welded construction
Promecam quick clamping system
CNC-controlled motorized backgauge (X: 750 mm)
Adjustable backgauge fingers
Inch and metric system can be selected
Ground and chrome-plated cylinders
Swiveling control panel
Foot control with anti-panic stop & emergency shutdown
Lateral protective grille (secured with limit switch)
Light curtain on the back of the machine (900 mm)
DSP laser finger protection system at the front (CE)
BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump
Slidable front support arms (2 pieces)
Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON
380 V 50 Hz
Painting: RAL 7035, RAL 5015

Optional special accessories available at an additional cost:
-CNC-controlled R-axis (250 mm)
-CNC motorized crowning
-Servo driven motors backgauge system for X + R axis (Mitsubishi)
-Painting in special colors on customer request

Documentation in German or English
CE conformity

Seller

Last online: Yesterday

Registered since: 2014

9 listings online

Call

Send inquiry

Telephone & Fax

+49 2595 ... show

These listings may also fit your interest.

Listing

Elchingen

18,573 km

Industrial robot
ABBIRB 6640-235/2.55

€9,500

ONO plus VAT

Call

Listing

Hydr. 3-roll sheet round bending machine OMCCA HSI 3000 x 4

Rödermark

18,557 km

Hydr. 3-roll sheet round bending machine
OMCCAHSI 3000 x 4

Call

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW Nksdpfxsmdqllo Ah Het - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

See details

Listing

Double column stamping press Edelhoff DARR1/200/830

Ennepetal

18,538 km

Double column stamping press
EdelhoffDARR1/200/830

Call

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Njdpfogpxc Sjx Ah Hekt Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

See details

Listing

Bed type milling machine CNC Bettfräsmaschine Universal ZAYER 20 KF 4000

Westerkappeln

18,429 km

Bed type milling machine
CNC Bettfräsmaschine Universal ZAYER20 KF 4000

€55,000

fixed price plus VAT

Call

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Nksdjwtpfpspfx Ah Het Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

See details

Listing

Tata

18,035 km

Hydr. pressbrake
AmadaITS2 80 25

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Nedpfxovncife Ah Hskt Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg

See details

Listing

Portal - Machining Center DROOP + REIN TFS 22 40 DT D40 P

Germany

18,384 km

Portal - Machining Center
DROOP + REINTFS 22 40 DT D40 P

Call

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm Njdpfovy Ihdsx Ah Hokt z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

See details

Listing

Nevers

19,092 km

Machining center
EMMEGIPHANTOMATIC T3A

€28,000

fixed price plus VAT

Call

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Nksdoundg Uspfx Ah Het Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

See details

Listing

Four-Roller Bending Machine Haeusler VRM-hy 3500x65/55

Berlin

18,139 km

Four-Roller Bending Machine
HaeuslerVRM-hy 3500x65/55

Call

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Nsdpfenvfdbex Ah Hskt

See details

Listing

Thread cutting machine M3-M10 MAXION BT 18 GL

Böblingen

18,629 km

Thread cutting machine M3-M10
MAXIONBT 18 GL

Call

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 Nkodpfx Ahjfrlnds Hst 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

See details

Listing

Horizontal band saw Bernardo HBS 275 - 400 V

Mudersbach

18,541 km

Horizontal band saw
BernardoHBS 275 - 400 V

€2,150

ONO plus VAT

Call

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Nsdpfed Du T Ijx Ah Hokt Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

See details

Advertise here