8
General condition used
tank volume 50.000 litres max. permissible operating temperature 98 °C lower bottom bottom of bottle construction type standing
Insulation insulation available Insulation jacket hermetically welded Insulation material cork Insulation jacket material stainless steel Insulation thickness 50 mm
Yku90
Technical data / dimensions Diameter inside 3,100 mm Diameter outside 3,218 mm Cylindrical height 6,950 mm Total height 8,050 mm Year of construction 2004
Equipment manhole / dom...
6
Used machine
Year of construction: 1997
State: Functional
Equipment and technical data:
edge infeed with aut. roll magazine and single infeed
Cutting shears up to 3.0 mm
Glue basin for granulate
crosscut saw with 2 aggregates
Combi-milling unit flush/bevel controlled
Radius milling unit controlled
PLC control
Technical data:
max. edge thickness : 0.2 - 6 mm
min. workpiece thickness : 8.0 mm
max. workpiece thickness : 42 mm
min. workpiece width : 70 mm
feed speed 1: : 12 m/min
Weight approx. : 12...
15
The machine are specially designed to carry aout on edges all the processes which are normally carried out on surfaces.
The machine can be employed in the functions:
1) wooden or veneered edges finishing for any type of veneer
2) edge filling operation before the finishing for any type of constructed board like PD, OSB, MDF, etc.
Masch.: - Nr. 221/E
Max. thickness of working pieces 60 mm
Min. thickness of working pieces 10 mm
Min. working width 100 mm
Working units:
Honing / Sanding unit TP f...
3
max. wheel diameter:650 mm
max. module:15
min. module:0,5
measuring range Z-axis:550 mm
min./max. distance between centers:1000 mm
connected load frequency:400 V
total connected load:3 kVA
dimensions of the machine ca.:2,5 x 1,5 x 2,4 m
weight of the machine ca.:3000 kg
Equipment, Accessories:
· Counterholder with tailstock
· Workshop PC HP EliteDesk and intel CORE i5 vPro Processor new in 2015 equipped with
Windows 7 operating system
· 19?? Screen, keyboard and mouse
· Operating ter...
1
Sheet width 300 mm
maximum sheet thickness 3 mm
Delivery time approx. 6-8 weeks of order placement
Sheet width: 300 mm
min. sheet thickness: 0.4 mm
maximum sheet thickness: 3 mm
Max cross section: 300 x 3 mm
Roll diameter: 80 mm
Engine torque: 8 nm
Be9ldux2m8
Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindigkeit las...
6
Beveller, edges former, edges Broacher Trump
Chamfering steel plates to the weld seam preparation
Type TKF 103
Sheet thickness: 4-25 mm
Helix length max: 10 mm
Helix angle: 30°
Power: 2000 Watt
Power supply: 220 volts, 50 Hz
-equipped with guide bracket for 30° Helix angle - nachschleifbarer shock steel for high tool utilization
-multiple shock steels
2rcc7y
-Base plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thickness
To the arrival angles of straight and curved edges with a...
9
max. wheel diameter 220 mm
gear width 55 mm
max. module 6,5
min. module 1,5
spindle turning speed - stepless 667 U/min
number of teeth 6 - 120
inserted tooth milling cutter dia. 124 - 220 mm
workpiece spindle stepless 345 U/min
spiral angle 0 - 60 °
ratio of transmission 1 : 10
min. ratio of transmission 1 : 1
total power requirement 10 kW
Benx7syflg
weight of the machine ca. 13 t
dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
integrated deburring unit
5
Second-hand machineBuilt : 2011Condition: Function testedBlue thickness max mm : 6Blue height max mm : 65Thickness of roll material max mm : 3Workpiece length min mm : 160Workpiece width min mm : 65Feed max m/min : 10Gluing system cartridge : JaGluing system granulate : YesSuitable for PUR-glue : YesJoint-milling unit : YesCross-cut saw unit : 2 motorsFlush/radius/bevelling stations : 1corner copying unit : 1 motorDrawing blade unit : profile and flat strip magazine : YesAggregates intermittent ...
The machine are specially designed to carry aout on edges all the processes which are normally carried out on surfaces.
The machine can be employed in the functions:
1) wooden or veneered edges finishing for any type of veneer
2) edge filling operation before the finishing for any type of constructed board like PD, OSB, MDF, etc.
Masch.: - Nr. 221/E
Machine lenght approx. 20.000 mm
Max. thickness of working pieces 60 mm
Min. thickness of working pieces 10 mm
Min. working width 100 mm
Working...
5
Gear motor, electric motor, electric gear motor
Hirnmc72i
-Speed: 15 rpm
-Power: 0.55 kW
-Construction: bevel gear
-Diameter shaft: 25 mm
-Protection class: IP 54
-Weight: 28 kg
1
Sheet width 400 mm
maximum sheet thickness 3 mm
Delivery time approx. 6-8 weeks of order placement
Sheet width: 400 mm
min. sheet thickness: 0.4 mm
maximum sheet thickness: 3 mm
Max cross section: 400 x 3 mm
Roll diameter: 80 mm
Engine torque: 10 nm
Nnii9
Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindigkeit lastlos...
3
max. wheel diameter 1010 mm
gear width 0 mm
max. module
min. module
total power requirement 15 kW
weight of the machine ca. 9,5 t
dimensions of the machine ca. m
Max. depth of tooth10mm
Max. workpiece Ø (for clearance)1,010mm
Max. external Ø of coupling610mm
Sliding base withdraw216mm
Max. distance from grinding wheel to workpiece nose90 - 430mm
Max. weight of workpiece, including clamp500kg
No. of teeth32 to 150
Grinding wheel Ø, approx152 - 320mm
Grinding wheel speeds, infinitely va...
9
max. wheel diameter 275 mm
Nlpgx
max. module 6
min. module 1,5
Control SINUMERIK 840 C
tooth width 5,5 mm
spiral angle min. 0 / max. 60 °
max. number of teeth 120
min. number of teeth 5
ratio of transmission 1:10
min. ratio of transmission 1:1
work piece spindle speed max. 110 U/min
blade head turning speeds 20 - 110 U/min
total power requirement 100 kW
weight of the machine ca. 15,5 t
dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
max. wheel diameter 275 mm
gear width 55 mm
max. module 6
min. module 1,5
Control Sinumerik 840C
tooth width 5,5 mm
spiral angle 0 / 60 °
max. number of teeth 120
min. number of teeth 5
Dwinme
transmission ratio max. 1:10
transmission ratio min. 1:1
spindle speeds max. 110 mm
blade head turning speeds 20-110 U/min
total power requirement 100 kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. 5,2 x 2,3 x 2,4 m
Euipment/ Accessories:
- documentation
10
General Location Bremen Condition used
Vessel Manufacturer GEA Volume 3.270 Liter Vacuum 1,00 bar Max. Overpressure 3,20 bar Max. permissible operating temperature 145 °C Type of construction hanging Stand form claws Number of feet 3 pieces
Heating/cooling jacket Heating/cooling available Volume double jacket 261.0 litres Max. permissible operating temperature 90 °C Temperature control cylinder Double jacket Temperature control underbody Double jacket
Insulation Insulation available Insulation j...
5
max. wheel diameter:215 mm
gear width:40.65 mm
Largest Speed Ratio:1:10
x-axis:(horizontal) -152 to 102 mm
y-axis:(vertical) -102 to 178 mm
z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm
b-axis:3 - 90 °
max. distance machine center to spindle slide:115 mm
max. nos. of teeth:5 - 200 ( inclusive ) St.
workpiece external diameter max.:215 mm
tooth profile - width x height:16 x 40,65 mm
grinding wheel diameter:51 -190 mm
grinding wheel turining speeds:1000 - 6000 1/min
workpiece turning...
1
Sheet width 200 mm
maximum sheet thickness 4 mm
Delivery time approx. 6-8 weeks of order placement
Sheet width: 200 mm
min. sheet thickness: 0.4 mm
maximum sheet thickness: 4 mm
Max cross section: 200 x 3 mm
Roll diameter: 80 mm
Engine torque: 8 nm
Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindigkeit lastlos 100 m ...
7
Energy efficiency class: 3 IP55/F/S1
Suitability: Inline shredding e.g. for film edge strips as well as PP edge strips.
Throughput capacity: approx. 100 - 120 kg/h
Noise level: <75 dB(A)
3-knife rotor
2 stator knife rows
rotor diameter: 250 mm
working width: 250 mm
rotor speed: approx. 250 rpm
inlet cross section: approx. 250 x 250 mm
Sieve hole size: 6 mm Ǿ
drive motor: 7,5 kW
Suction pan granulator in V2A with compressed air nozzles (cleaning), with connection for vacuum conveyor
Feeding de...
max. wheel diameter 630 mm
gear width 120 mm
Nlngv
max. module 12
min. module 2,2
max. number of teeth 120
min. number of teeth 5
weight of the machine ca. 16 t
dimensions of the machine ca. 4750 x 2300 x 2600 mm m
Bevel gear sets for Butler Soraluce
diagonal head with 2,5 ° Hirth toothing 28KW drive 3000/min
Bsdyq07shd
grease lubricated HPGS geared
4
max. wheel diameter 300 mm
max. module 8
min. module 0,7
Control SINUMERIK 840 D
min/max. pitch cone angle - 90 / + 90 °
workpiece spindle - bore 127 mm
grinding wheel diameter 50 - 230 mm
spindle speeds (infinitely variable) 7.500 U/min
work piece spindle speed 700 U/min
total power requirement 146 kW
Nfaikuqv
weight of the machine ca. 21 t
dimensions of the machine ca. 5,5 x 3,6 x 3,1 m
with filtration system ADF 1.0 from Hoffmann
A precision grinding machine for the machining of spiral ...
5
max. wheel diameter:130 mm
max. module:3
total power requirement:15 kW
weight of the machine ca.:6 t
dimensions of the machine ca.:2,3 x 2,5 x 2,17 m
A well-preserved CNC hobbing machine Vertical for shafts and wheels
With tailstock
Also suitable for hard milling (good for steering pinion)
Rapid traverse radial, axial: 10.000 mm/min
Rapid traverse tangential: 7.500 mm/min
Max. wheel diameter 130 mm
Max. module 3 mm
Tangential slide travel 200 mm
Radial slide travel 10 / 100 mm
Axial sli...
1
Sheet width 600 mm
I3emtjb
maximum sheet thickness 3 mm
Delivery time approx. 6-8 weeks of order placement
Sheet width: 600 mm
min. sheet thickness: 0.4 mm
maximum sheet thickness: 3 mm
Max cross section: 600 x 2 mm
Roll diameter: 80 mm
Engine torque: 10 nm
Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindigkeit lastl...
5
sheet width / mm
plate thickness 50 mm
total power requirement / kW
J92qfj
Bevel angle: 22-55 degrees
Sheet thickness: 50 mm
2
This machine has not been used in serial production and has been standing still for most of the time in central heated dry workshop. Can be inspected under power and comes with large set of gears, special tooling, new modular cutters etc.
Ozgof
9
Edge banding machine manufacturer Hebrock type AKV 2001 DK
Built in 1991
Workpiece width of min. 70 mm workpiece length of min 250 mm workpiece height of min. - max. 10-50 mm edge thickness min max 0.4 5 mm feed m/min 11 m / min fixed hinged side right glue specifying glue roll gluing unit hot melt Adhesive edge magazine roll 3 mm edge magazine solid 5 mm
Pressure zone straight caps straight bevel/RADIUS milling 2 per page buffing unit/bottom 1 piece height adjustment manual connection 380/50 V...
15
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and
strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 ...
9
Attention!!! We take your used 12m³ construction dump (tires 26.5) for net 15.000€ in payment!!!
HBM 5300
Heavy construction dumper - Premium equipment
- perm. GG 22000 kg, internal 31000 kg
- speed 40 km/h
- bridge size 5250 x 2300 mm
- steel superstructure
- Trough height 1200 mm
- complete tub, incl. front and rear wall, made of 6 mm Hardox, tub bevelled
- reinforced version, chassis and bridge frame made of rectangular tube S355
- 10-hole axles
- pendulum unit
- Bolted axle unit
- 105 km/h...
1
Max. bevel width 16 mm
Chamfer angle 22.5 - 60 °
Delivery time approx. 2 months from order placement
Maximum chamfer width: 16 mm
Chamfer angle: 22.5°, 30°, 37.5°, 45°, 55°, 60
Chamfer radius: 2 - 5 mm
Spindle speed (without load): 1,800 - 5,850 rpm
Min. diameter of the countersink: approx. 40 mm
Engine: 2,2 kW
length: 585 mm
width: 156 mm
height: 238 mm
Weight: 10 kg
Be9j3tn0m2
Portable chamfering machine for plate and pipe edges made of steel, aluminium alloys, brass or plasticChamfer angles a...
1
construction: support segment - system
material width 340 mm
coil weight 1,0 t
coil inside diameter 265 - 565 mm
weight of the machine app. 0,25 t
dimensions of the machine app. 1,40 x 1,20 x 1,80 m
Za7rc9ggo
no. – support segments 3
length – support segments 400 mm
working direction left-right / right-left
counter ring – Ø 1.600 mm
shaft – Ø 70 mm
height floor-middle of shaft 840 mm
accessories:
construction - pedestal construction - rectangular tube positioned under decoiler construction to...
max. wheel diameter 220 mm
gear width 55 mm
max. module 6,5
min. module 1,5
spindle turning speed - stepless 667 U/min
number of teeth 6 - 120
Fe7uqib
inserted tooth milling cutter dia. 124 - 220 mm
workpiece spindle stepless 345 U/min
spiral angle 0 - 60 °
ratio of transmission 1 : 10
min. ratio of transmission 1 : 1
control SINUMERIK 840 C
total power requirement 10 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 6,4 x 6,5 x 3,7 m
Software Version COP V 5.16
Integrated...
4
Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine
-with tripod
-Bevel length: max. 10 mm
-Max. Material thickness: 25 mm
-Strength: 40 kg/mm²
-220 V 2000 W
-Strokes at full load: 400 strokes/min.
Gulkkc
-Dimensions: 560/220/H570 mm
-Weight: 18 kg
5
max. wheel diameter:215 mm
gear width:40.65 mm
Largest Speed Ratio:1:10
x-axis:(horizontal) -152 to 102 mm
y-axis:(vertical) -102 to 178 mm
z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm
b-axis:3 - 90 °
max. distance machine center to spindle slide:115 mm
max. nos. of teeth:5 - 200 ( inclusive ) St.
workpiece external diameter max.:215 mm
tooth profile - width x height:16 x 40,65 mm
grinding wheel diameter:51 -190 mm
grinding wheel turining speeds:1000 - 6000 1/min
workpiece turning...
8
SANDKIPPER SK 5500, dump truck, new!!!
D80lsej
- Perm. GG 22000 kg
- Speed 40 km/h
- Bridge size 5500 x 2200 mm
wall and floor plate 6 mm Hardox, trough bevelled
- Reinforced version, chassis and bridge frame made of rectangular tube S355
- 10-hole axles (heavy duty axles), brake 420 x 200
- Tandem unit manufactured, parabolic spring 100 mm wide, 3-layered
- Ball tilt bearing Ø 110 mm
- 105 km/h axles (without ABS up to 60 km/h)
- Hydraulically opening rear wall with double-acting cylinders
- ...
1
Max. bevel width 21 mm
Chamfer angle 0 - 60 °
Delivery time approx. 2 months from order placement
Maximum chamfer width: 21 mm
Chamfer angle: 0° - 60
Spindle speed (230 V): 1,360 - 1,630 rpm
Spindle speed (115 V): 1,300 - 1,560 rpm
Chamfering of outer pipe edges: 150 - 300 mm 260 - 600 mm (optional)
Gvv8i8
Motor (50 Hz): 1.6 kW
Motor (60 Hz): 1.8 kW
length: 441 mm
width: 366 mm
height: 339 mm
Weight: 23 kg
Portable chamfering machine specially designed for chamfering sheets and tubes made of sta...
6
Used machine
Year of manufacture: 2005
Machine still in production
Equipment:
Top pressure with compound V-belt
with central lubrication
Joining and milling unit 08.376
Adhesive application station 283.08
Magazine 283.052 with printing unit
Cross-cut unit 08.42
Milling unit 08.055 for flush milling/bevelling
Multiple processing unit 08.348
radius milling with copying of the front and rear edge
suitable for veneer and plastic edges
max. thickness 3 m
height min. approx. 14 mm, max. approx. 45 mm
...
8
max. wheel diameter 270 mm
gear width 58 mm
max. module 6,5
min. module 1,5
Control Sinumerik 840D
tooth width 58 mm
Civ3sdl3
spiral angle 0 / 60 °
max. number of teeth 180
min. number of teeth 6
transmission ratio max. 1:1
transmission ratio min. 1:10
blade cutter head diameter 39-105 mm
blade head turning speeds 1500 U/min
spindle speeds 1500 mm
total power requirement 40 kW
weight of the machine ca. 11,2 t
dimensions of the machine ca. 3,7 x 2,1 x 2,1 m
Equipment/ Accessories:
- lo...
2
- Producer Venjakob / Superfici
- Type TU166-30 + 2 UVM55
- Year of construction 1997
Bsfjhgr3oq
- Working width 1300 mm
- Number of lamp from top 2 Stk.
- Lamp bevel to conveyor
- For mercury lamps
- For gallium lamps
- Electic capacity lamp 80 W/cm
- Selective shiftable 80/40 W/cm
- Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min
- Location
- Voltage / HZ 400 / 50
- Commodity code 8419 3200
5
max. wheel diameter 215 mm
gear width 40,65 mm
max. module
total power requirement 20 kW
weight of the machine ca. 10 t
Max. external Ø of workpiece215mm
Tooth profile, height x width16 x 40.65mm
No. of teeth5 - 200
Max. tooth ratio1 : 10
Grinding wheel Ø51 - 190mm
Wqttjlx9
Grinding wheel speeds1,000 - 6,000rpm
X Axis (horizontal)152mm
Y Axis (vertical)178mm
Z Axis (slide base plate)304mm
Distance from middle of machine to middle of workspindle115mm
Axial speed125 mm/sec
Workpiece speeds0...
7
Code: 0243
Brand: BAUSOLA
Model: SB/1-P - CE Standard
Automatic bevelling machine for shutter slats - CE Standard
Automatic mechanical milling machine to bevel edges with automatic copying device that guarantees perfect 30 ° chamfering or rounding on the perimeter of flat profiles
Supv7o
Working dimensions:
Palette length from 150 to 800 mm
Palette width from 20 to 100 mm
Palette thickness from 6 to 30 mm
N ° 2 cutter motors Kw 0,37 each
Feed speed variator
Equipped with buffs with 30 degr...
1
Max. bevel width 30 mm
Chamfer angle 15 - 60 °
Delivery time approx. 2 months from order placement
Maximum chamfer width: 30 mm
Bevel angle: 15° - 60
Spindle speed (without load): 500 - 2,920 rpm
Infeed speed: up to 3.3 m/min
Hvmtx39
Chamfering of outer pipe edges (optional): 50 - 150 mm
Work piece height: 3 - 100 mm
Min. workpiece dimensions: 150 x 50 x 3 mm
Engine: 7,5 kW
Weight: 850 kg
Infinitely variable control of spindle speed and infeed speed optimal for different types of steel and alumi...
1
ratio of transmission 10:1
min. number of teeth 3
max. number of teeth 200
range of tooth size 20 mm
tooth width max. 58 mm
diameter of tools min 69,85 mm
diameter of tools max. 230 mm
x-axis 325 mm
y-axis 350 mm
z-axis 470 mm
C9vzbvhzu
work piece table - Ø 212,71 mm
b-axis + 90,1 / - 1 °
Control SIN 840 D SIEMENS
total power requirement 75 kW
weight of the machine ca. 10.000 Kg
dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
Coolant system Hoffmann DO 150
Oil mist suction ELBARON
Fire ...
3
max. wheel diameter:650 mm
max. module:15
min. module:0,5
measuring range Z-axis:550 mm
min./max. distance between centers:1000 mm
connected load frequency:400 V
total connected load:3 kVA
dimensions of the machine ca.:2,5 x 1,5 x 2,4 m
weight of the machine ca.:3000 kg
Equipment, Accessories:
· Counterholder with tailstock
· Workshop PC HP EliteDesk and intel CORE i5 vPro Processor new in 2015 equipped with
Windows 7 operating system
· 19?? Screen, keyboard and mouse
· Operating ter...
max. wheel diameter 275 mm
gear width 150 mm
max. module 6
min. module 1.5
max. workpiece diameter 275 mm
tooth width max. 5.5 mm
spiral angle 0 - 60 °
number of teeth 5 - 120
transmission ratio min. 1:1
transmission ratio max. 1:10
milling drive motor 20 kW
workpiece drive 14.5 kW
total power requirement 62 kVA
weight of the machine ca. 12 t
dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
Tool spindle (D-axis)
- workpiece spindle speed (infinitely) 60 to 350 r.p.m.
Tool positioning ...
MODUL - ZFTK 250/1 - 1987- change gears- 10-11 set of knives- knives grinder- knife height measuring - max gear diameter 315 mm- max gear width 45 mm- max modul 10- number of cutters 2x22- change gears- chip conveyor- was in use till end of November 2019- nice machine, cleaned- was manufacturing small gears
Bhg8bp0iqb
4
Bevel gear unwinding testing machine
Brvydawhon
in a good condition
1
Max. bevel width 21 mm
Chamfer angle 15 - 60 °
Delivery time approx. 2 months from order placement
Maximum chamfer width: 21 mm
Bevel angle: 15° - 60
Spindle speed (230 V): 2,780 - 3,340 rpm
Spindle speed (115 V): 2,740 - 3,290 rpm
Engine: 2,2 kW
Be9j339aa3
Weight: 20,5 kg
Portable high performance machine for chamfering steel plates and tubesGuide rollers for easy operationAutomatic overload protectionTwo milling heads with 10 square insertsOptional:Facing of platesFacing of round platesFacing ...
5
Gear motor, electric motor, electric gear motor
-Speed: 76 rpm
-Power: 0.55 kW
-Construction: bevel gear B5
-Diameter hollow shaft: 25 mm
-Rezess: Ø 70 mm
22ky933cs
-Hole spacing: 55 mm
-Protection class: IP 55
-Dimensions: 355/210/H155 mm
-Weight: 15 kg
3
turning speed range 3-4000 U/min
tool adaptor ISO 50
drive motor 30 kW
distance spindle - column 358 mm
Benmiyjhid
Technical specifications
Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar.
Spindles and gears are made of case-hardened and tempered chrome-nickel.
Spiral bevel gears, Klingelnberg system with ground tooth flank.
High-precision bearings.
Standard DIN-2080 / 69871 taper tool Drawbar DIN-69872. Consult for others.
Wide range of performances and appli...