Used Edge Milling Machine for sale (66,230)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: Rcjdpfx Ajzv Eaxohcsf 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Rodpozccuujfx Ahcjcf Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz Rodpsb A Nlxefx Ahcscf -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available -Price: per piece -Weight: 5 kg/piece

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Rodpfxjxxb Rre Ahcjcf Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) Rjdpfx Aer A Eq Rohcecf L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction Rcjdpfx Aozpblqohcjf - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Rodsx D Tbmepfx Ahcocf Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Bevel size adjustable up to max. 10 mm at 45° Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Rcjdpjtwcn Refx Ahcjf Ex works, excl. VAT.

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame Rcsdpszw N Euofx Ahcef - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg Rcjdji Ab Unjpfx Ahcsf - Transport case

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges Rodpfxjb A Sy Hs Ahcocf -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Rcjdszuxn Tjpfx Ahcjf Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts Rjdpfsb A Ta Nox Ahcscf -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Rsdpoxd Si Asfx Ahcjcf Item no. 0175200

Condition: used, Year of construction: 2010, Edge milling machine Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Rcodpfx Aozuzlhjhcef Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: new, Edge and contour milling machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (continuously variable) Maximum chamfer width: 3 mm Standard equipment includes: - Guide rail - Allen wrench, open-end wrench - Insert ring Ø 30 x 8 mm Rcjdpfjbhfzbex Ahcof - Collet Ø 6 mm with lock nut - Operating manual

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor Rcjdpfx Ahob Uhrzecsf -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW Redsd Af Shjpfx Ahcjcf - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, The table and the dust extraction system are included in the price! Rcjdszr H H Sjpfx Ahcof TECHNICAL DETAILS Travel range X-axis: 3,500 mm Travel range Y-axis: 1,100 mm Travel range Z-axis: 1,500 mm Table dimensions: 3,800 x 1,000 mm Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool positions: 40 Working feed rate: max. 15,000 mm/min Rapid traverse: 40,000 mm/min Maximum axis force (X, Y, Z): 1,500 N MACHINE DETAILS Control system: SELCA S 4045 PDH Operating hours according to image (as of: July 31, 2026) Total: approx. 29,147 h Partial: approx. 3,488 h A manufacturer's offer for dismantling and loading is available for €27,000.

Condition: excellent (used), SCM internships in excellent condition Rjdpfx Ahst Hkq Rococf

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Rcjdpswtfvkofx Ahcsf Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: good (used), For sale, Rsdpfxjv T Ttfo Ahcocf Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support Rcjdszwx Hujpfx Ahcef • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Availability: • After delivery of the new machine in December 2026 / January 2027.

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor Rcedpou Rv Rxsfx Ahcof -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Rcjdpevmglzjfx Ahcef Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available.