Weld edge former

BDS Maschinen SKF 20

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos Rcodsx Ea Ayepfx Apdeh -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Rsdpfjy D Ngzox Apdjch Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Year of construction: 1988, condition: good (used), machine/vehicle number: 73480-08, Offer 22679 Technical data: - Maximum sheet thickness: 50 mm Rodpskzhawjfx Apdoch - Minimum straight edge: 3 mm - Adjustable bevel angle: 25 - 55° - Working speed: 1.5 - 3.1 m/min - Crane attachment bracket - Drive: 400 V / 4 kW - Approximate space requirement: W 1400 x D 1200 x H 1950 mm - Approximate weight: 1500 kg

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W Rcjdpfx Apoi Ab Unodoh - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg - Transport case

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm voltage 400 V Rjdjyuql Sjpfx Apdsch total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: new, 3000 mm Rcodpfx Apjxaaf Dedeh Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Condition: as good as new (ex-display), Year of construction: 2024, available in various lengths upon request - Length 3000 mm with 3 support feet - Roller track with scale, manual measuring system with adjustable and foldable length stop, incl. reading magnifying glass Rcedpfx Asgrn U Sopdeh - Roller and measuring track for lighter plastic, aluminum, and steel profiles - The max. measuring length is the track length minus 250 mm - Support rollers, roller diameter 50x1.5mm, galvanized steel tube - Axle diameter 8mm - Track width 390 mm, usable roller width 300mm - Load-bearing capacity per meter of roller track approx. 100 kg/m - Support roller spacing approx. 290 mm - Track height adjustable from 770-1070 mm - All parts are painted, color silver-grey RAL 7042, feet anthracite-grey RAL 7016

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 350 mm, side roll diameter: 325 mm, roller diameter: 350 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 1,500 mm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, overall weight: 13,000 kg, total length: 5,400 mm, total width: 1,950 mm, total height: 2,350 mm, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING ROLL PINCH PYRAMID ON LINEAR GUIDEWAYS Bending capacity -Plate width 2500 mm -Rolling plate thickness 25 mm -Prebend thickness 20 mm -Rolls useful length 2550 mm -top roll D 350 mm -side rolls D 325 mm Hardened high strength surface of the 3 rolls Roll rotation driven hydraulic motor with gear unit Conical bending hydraulic tilt angle set of siderolls Re-rolling system welded shells rounding. Opening hydraulic front drop-end top roll tiltup Electric motors 25 Hp on hydraulic unit Vac 380/50 Rodpfx Aezdk Tyspdoch Digital position readouts of the bending rolls Manuals with the machine Dimension mm5400x1950 x H 2350 mm -weight 13 ton

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Rcsdpfx Apou Ngfdsdoh Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Rodpfozcngcex Apdjch Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!