Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-Bevel length: max. 20 mm
-Max. Material thickness: mm
Ber3oyfet7
-Dimensions box: 460/360/H355 mm
-Weight: 24 kg
Beveller, edges former, edges Broacher Trump
Chamfering steel plates to the weld seam preparation
Type TKF 103
Sheet thickness: 4-25 mm
Helix length max: 10 mm
Helix angle: 30°
Power: 2000 Watt
Power supply: 220 volts, 50 Hz
-equipped with guide bracket for 30° Helix angle - nachschleifbarer shock steel for high tool utilization
-multiple shock steels
2rcc7y
-Base plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thickness
To the arrival angles of straight and curved edges with a...
Technical data:
min. / max. material thickness 3 - 25.0 mm
0kh2rynd
max. helix length steel 400N/mm² 10 mm
max. helix length steel 600N/mm² 8 mm
max. helix length steel 800N/mm² 5 mm
Working speed approx. 2.5 m/min
Stroke rate 400 1/min
Drive 400 V / 2000 Watt
Space requirement approx. W 550 x D 200 x H 300 mm
Weight approx. 13 kg
Beveller Fabr. TRUMPF type TKF 100
Masch.# 702592
Mowel
Technical data:
maximum sheet thickness 25 mm
Helix angle 15-60 °
maximum bevel position at 40 kg strength 10 mm
maximum working speed 2.5 m / min.
Strokes per minute 500
Power 1900 / 1400 W
Weight 14.5 kg
Power supply 220 V / 50 Hz
used
sloping angle: 30 °
max. sloping width (at 40 kg solidity): 13 mm
electrical connection: 380 V kW
space needed: 820 x 850 x 1380 mm
weight: 700 kg
Cpchck
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-Edge milling: 0 - 3 mm
-Drive: 0.45 kW
-Angle: adjustable
Pfurkyzr
-Dimensions: 485/345/H250 mm
-Weight: 18.2 kg
Beveller
Offer number: 20122
Make: TRUMPF
Type: TKF 104 - 0
machine no.: 4522206
Year of construction: ca.2006
Technical data:
min. / max. material thickness 3 - 25.0 mm
Helix angle Standard 30° - 37.5° - 45
max. helix length steel 400N/mm² 11 mm
max. helix length steel 600N/mm² 9 mm
max. helix length steel 800N/mm² 6 mm
smallest inner radius 50 mm
smallest inner pipe diameter 80 mm
Operating speeds 2.5 m/min
Stroke rate 400 1/min
Drive 400 V / 2000 Watt
Space requirement approx. ...
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-Bevel length: max. 12 mm
-max material thickness: 40 mm
-Angle: cutting angle adjustable via the pressure roller
Bfjvqt0eft
-Chamfering of pipes: minium inside Ø 100 mm
-Feed: up to 2600 mm/min
-Dimensions: 480/320/H570 mm
-Weight: 65 kg
Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine
-Bevel length: max. 10 mm
-Strength: 40 kg/mm²
-220 V 1800 W
-470 strokes/min
-Weight: 15 kg
Libqf
Weld beveller, weld bevel former, weld seam preparation, bevel forming machine, edge milling machine
Gulkkc
-with tripod
-Bevel length: max. 10 mm
-Max. Material thickness: 25 mm
-Strength: 40 kg/mm²
-220 V 2000 W
-Strokes at full load: 400 strokes/min.
-Dimensions: 560/220/H570 mm
-Weight: 18 kg
Edge of chamfer machine Fabr. PULLMAX type X 93
Masch. # 70270-06, built in 1982
for optimum bevel for perfect welding seam preparation
exactly, distortion-free, purely metallic and chemically unaffected
Technical data:
Feed speed 1,5 / 3,1 m / min
Chamfering angle 25-55 °
KL. straight edge 3 mm
Bvxytavj
maximum sheet thickness 50 mm
Size 1360 x 1110 x 1510 mm
Weight approx. 1300 kg
used from operating resolution
in good condition
grinding diameter: 320 mm
grinding length: 400 mm
centre height: 160 mm
Grinding-wheel diameter: 700 mm
workpiece weight: 350 kg
Yqaa3c
control: PS TESLA NS - 915
total power requirement: 24 kW
weight of the machine ca.: 5.5 t
space requirements of the machine approx.: 3.5x2.2x2.8 m
bevel cut-in grinding machine
with loading magazine
On sale as is! As spare part donator
DOCUMENTATION AVAILABLE
Gear motor, electric motor, electric gear motor
-Speed: 76 rpm
-Power: 0.55 kW
-Construction: bevel gear B5
-Diameter hollow shaft: 25 mm
-Rezess: Ø 70 mm
-Hole spacing: 55 mm
-Protection class: IP 55
22ky933cs
-Dimensions: 355/210/H155 mm
-Weight: 15 kg
max. wheel diameter:130 mm
max. module:3
total power requirement:15 kW
weight of the machine ca.:6 t
dimensions of the machine ca.:2,3 x 2,5 x 2,17 m
A well-preserved CNC hobbing machine Vertical for shafts and wheels
With tailstock
Also suitable for hard milling (good for steering pinion)
Nxrkflh2
Rapid traverse radial, axial: 10.000 mm/min
Rapid traverse tangential: 7.500 mm/min
Max. wheel diameter 130 mm
Max. module 3 mm
Tangential slide travel 200 mm
Radial slide travel 10 / 100 mm
...
max. wheel diameter:650 mm
max. module:15
min. module:0,5
measuring range Z-axis:550 mm
min./max. distance between centers:1000 mm
connected load frequency:400 V
total connected load:3 kVA
dimensions of the machine ca.:2,5 x 1,5 x 2,4 m
weight of the machine ca.:3000 kg
Equipment, Accessories:
· Counterholder with tailstock
· Workshop PC HP EliteDesk and intel CORE i5 vPro Processor new in 2015 equipped with
Jwujvy
Windows 7 operating system
· 19?? Screen, keyboard and mouse
· Operat...
EDGE BANDING machine type OCMAC HS 26 S
second hand machine
volt. 380/50
for solid wood max. 10 mm. / PVC / veneers / melamine
composed by :
Technical details :
min. panel length mm. 120
min. panel width mm. 70
Pciyz
panel thickness min./max. mm.10/60
edge thickness min./max. mm.0,4/10
total installed power Hp 9
composition machine :
1. lower glue pot
2. motorized roller for automatic feeding
3. edge shear
4. end trimmer unit . 2 motors Hp 0,3 . rpm 12.000
5. top and bottom ( rough ) edge t...
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and
strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 ...
Ref. -No.: 10100
Brand: HÖFLER
Type of control: CNC
Control: CNC- ST 88 Zeiss
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Serial no.:
Diameter of the table top: 35 mm
Ytupk8
Center height above table: 75 mm
Counterholder tip diameter: 50 mm
Stroke of the counter holder tip: 40 mm
Distance between centers min.: 20 mm
Measuring height above table min.: 50 mm
Measuring height above table max.: 550 mm
Diameter table: 260 mm
Base circle diameter: 390 mm
Rolling path max.: 1...
gear diameter 900 / 500 mm
gear width 500 mm
max. module 1 - 10 .
spur gear - distance of shafts 20 - 520 mm
Control
workpiece weight max. 50 kg
spindle bore 90 mm
spindle turning speed - stepless max. 100 U/min
power capacity kW
weight of the machine ca. 2,7 t
dimensions 2,0 x 2,4 x 1,9 mm
Checking for spur gears and bevel gears!
Havm8vatu
x-travel: mm
plate thickness: mm
work piece width: mm
machine weight approx.: 64 kg
dimensions L x W x H: 0,76 x 0,70 x 0,55 m
application: for grinding of 45° bevel approx. 4mm
- grinding disc Ø 430x35mm ( cup wheel disc)
- work piece 2 prisma surfaces L:680 x W:50mm, vertical adjustment 10mm
Mt3dt
- power connection 380V with connection cable 4 meter
max. wheel diameter 220 mm
gear width 55 mm
max. module 6,5
min. module 1,5
Fe7uqib
spindle turning speed - stepless 667 U/min
number of teeth 6 - 120
inserted tooth milling cutter dia. 124 - 220 mm
workpiece spindle stepless 345 U/min
spiral angle 0 - 60 °
ratio of transmission 1 : 10
min. ratio of transmission 1 : 1
control SINUMERIK 840 C
total power requirement 10 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 6,4 x 6,5 x 3,7 m
Software Version COP V 5.16
Integrated...
max. wheel diameter:* mm
gear width:* mm
Bt2rv8bfnd
max. module:*
min. module:*
total power requirement:* kW
weight of the machine ca.:9 t
dimensions of the machine ca.:7,64 x 3,14 x 3,25 m
For technical data, see PDF-File enclosed
max. wheel diameter:650 mm
max. module:15
min. module:0,5
measuring range Z-axis:550 mm
min./max. distance between centers:1000 mm
connected load frequency:400 V
total connected load:3 kVA
dimensions of the machine ca.:2,5 x 1,5 x 2,4 m
weight of the machine ca.:3000 kg
Equipment, Accessories:
· Counterholder with tailstock
· Workshop PC HP EliteDesk and intel CORE i5 vPro Processor new in 2015 equipped with
Windows 7 operating system
· 19?? Screen, keyboard and mouse
· Operating ter...
cutting diameter 510 mm
saw band length 9800 mm
cutting width 1020 mm
dimensions of saw-band 9800 x 67 x 1,6 mm
work height max. 750 (630) mm
capacity 90 degrees: round 510 mm
capacity 90 degrees: flat 1020 x 510 mm
capacity 60 degrees: round 500 (400) mm
capacity 60 degrees: flat 500 (400) x 510 mm
capacity 45 degrees: round 510 mm
capacity 45 degrees: flat 750 (670) x 510 mm
cutting length min. ca. 30 mm
cutting speed 15 - 150 AC m/min
down speed 0 - 300 stufenlos mm/min
cutting pressure stufe...
max. wheel diameter 275 mm
gear width 55 mm
max. module 6
min. module 1
Control 840 C Siemens
total power requirement 100 kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
Bplsrduawc
sheet width / mm
plate thickness 50 mm
Dzv097zj
total power requirement / kW
Bevel angle: 22-55 degrees
Sheet thickness: 50 mm
Bavelloni SB/1L shape bevel polishing machine.
Ifjmhpwce
Machine is in good working order and is little used
max. wheel diameter:215 mm
gear width:40.65 mm
Largest Speed Ratio:1:10
x-axis:(horizontal) -152 to 102 mm
y-axis:(vertical) -102 to 178 mm
z-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mm
b-axis:3 - 90 °
max. distance machine center to spindle slide:115 mm
max. nos. of teeth:5 - 200 ( inclusive ) St.
workpiece external diameter max.:215 mm
tooth profile - width x height:16 x 40,65 mm
grinding wheel diameter:51 -190 mm
grinding wheel turining speeds:1000 - 6000 1/min
workpiece turning...
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
top pressure, extendable work piece support, signal lamp
for work piece sequence and synchronisation of working units
by encoder. For ABS, PVC, melamine and strong wood veneer
roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm
and of 8 – 60 mm wo...
max. wheel diameter 275 mm
gear width 55 mm
max. module 6
min. module 1,5
control Sinumerik 840C
Pvmvrm
tooth width 5,5 mm
spiral angle 0/60 °
max. number of teeth 120
min. number of teeth 5
transmission ratio max. 1:10
transmission ratio min. 1:1
spindle speeds max. 110 mm
blade head turning speeds 20-110 U/min
total power requirement 100 kW
weight of the machine ca. 16700 kg
dimensions of the machine ca. 5200x2300x2400 mm
max. wheel diameter 275 mm
Ewaz8yp
gear width 55 mm
max. module 6
min. module 1
Control 840 C Siemens
total power requirement 100 kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
General Manufacturer Bartec Schwarte Location Bremen Condition used
Tank volume 37.000 litres Max. Overpressure 0,99 bar Max. permissible operating temperature 110 °C Type of construction standing form feet height adjustable Number of feet 4 pieces
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
N0rmd
Technical data / dimensions Diameter inside 3.090 mm Diameter outside 3.200 mm Cylindrical height 4.500 mm Total height 7.650 mm Wal...
Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine
-with: rail system
-12x rails length: 1210 mm
-Bevel length: max. 30 mm
-max material thickness: 40 mm
Ber3oot893
-with: electronic feed device electronically adjustable
-Dimensions box: 1170/780/H510 mm
-Weight: 320 kg
max. wheel diameter:* mm
gear width:* mm
max. module:*
min. module:*
F7mntiep
total power requirement:* kW
weight of the machine ca.:9 t
dimensions of the machine ca.:7,64 x 3,14 x 3,25 m
For technical data, see PDF-File enclosed
Exhibition machine
Year of manufacture: 2020
Equipment and technical data:
> Solid German machine construction
> for dressing and jointing including hollow and
and point joint adjustment for HOBEL WIDTHs
up to 510 mm and max. chip removal up to 8 mm
> Ergonomic working position directly
the cutter head
> Panhans four-knife shaft with strip planing knives
and setting devices
> finely planed cast iron tables, total table length
2850 mm
> Control panel on top at eye level with digital
display of th...
max. wheel diameter 400 mm
gear width 0 mm
module
pinion diameter - max. 254 mm
axial cross angle 90 °
total power requirement 15 kW
weight of the machine ca. t
dimensions of the machine ca. m
This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal.
The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting positi...
max. wheel diameter 275 mm
gear width 150 mm
max. module 6
min. module 1,5
total power requirement 62 kW
weight of the machine ca. 12 t
dimensions of the machine ca. 4,7x4,4x2,45 m
max. wheel diameter mm
gear width mm
max. module 6
min. module 1.5
max. workpiece diameter 275 mm
tooth width max. 5.5 mm
spiral angle 0 - 60 °
number of teeth 5 - 120
transmission ratio min. 1:1
transmission ratio max. 1:10
milling drive motor 20 kW
workpiece drive 14.5 kW
total power requirement 62 kVA
wei...
General Manufacturer Ullmann Location 2 x Bremen, 4 x 57234 Wilnsdorf Condition used
Tank Volume 25.500 Liter Vacuum 0,40 bar Max. Overpressure 0,40 bar Type of construction standing form feet Number of feet 4 pieces
Kybwg7c
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
Technical data / dimensions Diameter inside 2.500 mm Diameter outside 2.650 mm Cylindrical height 5.000 mm Total height 8.050 mm Wall thickness bottom 5.0 mm Wall...
orbital beveling machine, pipe saw, pipe cutting machine, pipe beveling machine
Beqnzlre2k
-Pipe diameter: 25 - 120 mm
-Milling tool with hard metal disc type: SMP 40
-with: outside diameter scanning system
-Dimensions: 720/640/H1260 mm
-Weight: 196 kg
Laser cutting machine / Portal flame cutting machine
Bvswfxdury
Manufacturer: ESAB
Type: ALPHAREX AXD 7000
Year of manufacture: 2015
Control: CNC VISION 55
CO-2 laser system: TRUMPF TruFlow 5000
track width: 7000 mm
Raceway length: 28000 mm
cutting area: 5000 x 22000 mm
Laser power: 5 kW
Type: CO2 laser
head: swivelling
cutting width:
vertical cutting: 5000 mm
bevel cutting: 4500 mm
cutting length:
vertical cutting: 22000 mm
bevel cutting: 21500 mm
height movement (Z-axis) max.: 330 mm
working h...
SCM Olimpic K201 edgebander - Year 2004
- edge thickness max. 3 mm
- feed 9m / min
- granulate gluing system
Bvycxzoiiz
- cutting unit - 2 balls
- milling: flush / radius / bevel 2 motors
- profile scraper unit
- polishing unit
- machine length approx. 2950mm
- CE mark
- weight approx. 650 kg
- NEW -
Description:
- Optimal user safety due to the pendulum safety-
Protective cover - meeting the strictest requirements and approval
by BG
- Transparent protective cover for an optimal view of the cutting line
- Angle-adjustable cross-cutting device with wedge-cutting jig
Round rod guided over maintenance-free plain bearings
- Aluminum parallel stop with high and flat application edge and
Brl0zcjezw
Eccentric clamping allows the trimming of boards,
Cuttings, bevel and angle cuts
- ...
ratio of transmission 10:1
min. number of teeth 3
C9vzbvhzu
max. number of teeth 200
range of tooth size 20 mm
tooth width max. 58 mm
diameter of tools min 69,85 mm
diameter of tools max. 230 mm
x-axis 325 mm
y-axis 350 mm
z-axis 470 mm
work piece table - Ø 212,71 mm
b-axis + 90,1 / - 1 °
Control SIN 840 D SIEMENS
total power requirement 75 kW
weight of the machine ca. 10.000 Kg
dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
with EWAB load cell built in 2012
(Linear loader)
no coolant ...
General Manufacturer Rolf H. Dittmeyer GmbH Location Bremen Condition used
Tank volume 20.000 litres Max. overpressure 0,50 bar Specific weight of the medium 1,37 (to/m³) Type of construction standing form feet height adjustable Number of feet 3 pieces
Technical data / dimensions Inner diameter 2,500 mm Cylindrical height 3,700 mm Total height 6,750 mm
Equipment manhole / dome in cylinder Type plate Equipment aeration / deaeration, spray head, crane eyes Outlet pipe end Ø approx. 80mm Remarks Ou...
Bevelling machine, bevelling machine, weld seam preparation, bevelling machine, edge milling machine, edge milling machine, mobile milling machine
-Bevel length: max. 30 mm
-Max. Material thickness: 40 mm
-Feed: up to 500 mm/min
-Dimensions box: 780/580/H400 mm
-Weight: 68 kg
Nmd9d
x-travel 500 mm
y-travel 500 mm
z-travel 350 mm
table surface area 800 x 450 mm
spindle taper: ISO 40
quill stroke mm
feed - longitudinal/cross mm/min
feeds vertical mm/min
turning speed range max. 3150 U/min
voltage 380 V / 50 Hz
power capacity 4 kW
Nlnlb
weight of the machine ca. 1,7 t
dimensions of the machine ca. 2,5 x 2,3 x 2,0 m
HEIDENHAIN TNC 155 - control,
with electrical hand wheel,
several tool tapers,
new set of bevel gears,
max. wheel diameter 500 mm
gear width - mm
module -
Control Siemens 820 M
spindle turning speed - stepless 0 - 3000 U/min
Work area over table
x-axis +/- 70 mm
y-axis 200 mm
z-axis 200 mm
total power requirement 36 kW
weight of the machine ca. 4500 kg
dimensions of the machine ca. 4220x3000x2310 mm
Pvl7qu
CNC production tester for spiral bevel and hypoid gears
used angular unit
Year of manufacture 2019
Vario Viso
Function Line
for angle cutting, milling and drilling
Machine connection: Wood Her with HSK 63 F
with ET-Adaper for saws
Drilling 3000 - 9000 rpm
Milling up to 15,000 rpm
Sawing up to 200mm saw blade, up to 70 mm cutting depth
5200 - 7000 rpm
adjustable
Availability: short term
Buaqxsrv0z
Storage location: Hochheim
grinding diameter 300 mm
Bhfcdfkm
grinding length 400 mm
max. module 22
min. module 0,5
grinding wheel diam. min/max. 160 / 300
turning speeds 1500 U/min
cross travel 120 mm
min/max. spiral pitch 5" - unendlich °
total power requirement 5 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 3,0 x 1,1 x 1,6 m
Sharpening machine for cylindrical, straight and
spiral fluted tools with left or right helix;
especially for spur / worm gear / profile hobs.
Chest and bevel grinding poss...
