Bevelling machine with rail system

BDS Maschinen SKF-AUTO

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity Ncjdsqa Am Tspfx Acbet

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel Ncedpfx Acjxf Hv Hsbot - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Ncedevhctwspfx Acbjt Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Ncedpfx Aetp Dhpecbjt  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Nedeg U Uv Rspfx Acboct Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 1.4 m³, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004501 The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear and front dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. When ordering a car trailer, please state the GVW of the vehicle with which you are towing the trailer. Available options for additional equipment * Additional drop sides * High bows with 80 cm high tarpaulin * Brackets for fastening the lashing straps * Anti-theft device * Spare wheel Technical data of the Garden Trailer 201 KIPP car trailer FAHRWERK - Steering axle from the manufacturers Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE WALLS - all side walls are made of galvanized steel. Total height of the drop sides: 70 cm Delivery costs will be charged additionally. Ncjdeir H Rwspfx Acbjt

Year of construction: 2007, condition: good (used), MAKE - LVD, Made in USA/BELGIUM MODEL - GLOBAL 20 1225 YEAR - 2007 CONTROL - FANUC 180I - PB CAPACITY - 20 Tons THROAT DEPTH - 1250.0 mm SHEET SIZE MAX. - 2500.0 x 1250.0 mm (1250.0 x 5000.0 mm) MAXIMUM WORK PIECE WEIGHT - 150 Kg MAXIMUM MATERIAL THICKNESS - 6.0 mm MAXIMUM TABLE SPEED - 0 – 4330.0 TURRET - 30 STATIONS, 4 AUTO-INDEXING MAXIMUM PUNCHING DIAMETER - 89.0 mm PUNCHING SPEED - 350 STROKES/MIN NIBBLING SPEED - 900 STROKES/MIN PRESS MOTOR POWER RATING - 460V 3 Phase Motor DIMENSIONS - 5560.0 x 5560.0 x 2400.0 mm WEIGHT - 16,000 Kg Ncodpfx Ajiab Epjcbjt PLUS BRUSH TABLE VERY LOW HOURS GOOD RANGE OF TOOLING

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 760 mm, total width: 330 mm, total length: 540 mm, overall weight: 55 kg, product height (max.): 4 mm, laser power: 1,500 W, Intelligent welding process support Give your welding process additional drive with intelligent functions. The Bodor Welding Process Database incorporates welding parameters for steel from 1 to 4 mm in terms of flat welds and fillet welds. Working as a beginner’s guide, it allows users with different levels of expertise to weld effortlessly. Smart control knob Ncsdpfx Acoqx Hnyobst The control knob is easy to navigate. Users are able to manage their welding solutions in one setting. They can select welding process and adjust welding parameters (e.g. power, weld bead width, frequency, etc) , and the knob will automatically store customized parameters for their operations in the future. Portable design, integrated power structure Without built-in water tanks or cooling fans, BodorWelder 1500 takes up a covering area of 0.24㎡. This compact machine aims to help users with complex welding jobs in diverse working scenarios. It also comes with a set of Bodor welding nozzles, fulfilling all kinds of requirements.

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm Nodpfsvpfzyex Acbsct spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: like new (used), Type: for META Clip boltless shelving units Size: For shelves 30 cm deep Height: 15 cm Finish: Galvanized Price: 30 cm €1/each The 50 cm version has already been sold. A shelf divider or shelf organizer is a practical storage accessory that allows shelving units to be divided into smaller compartments or sections. Nedpfx Aem Dr Txecbjct These elements are primarily used to create order and clarity for various items – such as books, documents, dishes, clothing, or office supplies. Shipping: Please inquire about freight costs by stating your postal code, location, and the desired quantity. Additional services: Planning, shelf assembly/disassembly, purchase/sale Changes and errors in technical data, specifications, and prices as well as prior sale reserved!