Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Precise cutting at 0 - 180 degrees and intermediate degrees - Quick adjustment buffers for 15, 22.5, 30, 45, 60 and 90 degrees - Table fixing arm for intermediate grades Djljq U Tctjinat Dsut - Saw output speed regulator slows down speed and reduces motor load when cutting aluminum. - Protection cover for safe cutting - Diamond saw diameter 450 millimeters exit distance : 12.5 centimeters - Measuring and transport conveyor is available as standard (2.5 meters right and left) OPTION - Cooling system and Hydro check system are available for aluminum cutting.

Condition: good (used), Year of construction: 2007, operating hours: 74,627 h, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, plate length: 710 mm, plate width: 630 mm, Machine was in use until December 2024! TECHNICAL DETAILS Screw diameter: 70 mm Injection pressure: 1,877 bar Displacement: 1,212 cm³ Clamping force: 3,500 kN Mold holder Distance between the tie bars: 710 x 630 mm Minimum mold thickness: 330 mm Maximum tool thickness: 710 mm Maximum distance between the clamping plates: 1,385 mm MACHINE DETAILS Total length: 7,700 mm Duolinatjvvtple Dst Total width: 2,000 mm Total height: 2,300 mm Total weight: 16,000 kg EQUIPMENT - Documentation - Manuals

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar Dujlinasddv Itot Det -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Year of construction: 2025, Condition: new, machine/vehicle number: 30630, IDE-o/c 12002673 SINGLE SCREW CO-EXTRUDER MEB 20/5x25D - NEW machine from IDE-stock program - mobile on 4 swivel castors - manual height adjustment +300/-100 mm via threaded spindle - control cabinet integrated in the frame - control via PLC Control 20/4 * operation via 5.7" touch panel * screw on/off Delinaou Tgrpot Deut * screw speed * screw speed display * display motor load * heating on/off/lowering value - emergency stop button on the control cabinet - incl. connection cable 5 m long with CEE plug 32 A - AC parallel shaft helical geared motor 2.6 kW air-cooled, in Z-design - screw speed max. 92 rpm - screw back pressure max. 300 bar (temporarily 350 bar) - one-piece cylinder (nitrided) with water-cooled feed zone * integrated pressure disc for overpressure protection - 2 cylinder heating zones with 2 cooling fans - die connection M22x1,5 with union nut - 1 additional heating zone with heating band for union nut - 1 additional heating zone for heating hose (without heating hose) - material hopper, 6 liter capacity, fixed on cylinder - 1 additional socket SCHUKO 16A for hopper conveyor screw Ø 20 mm x 25 D - Screw for processing PVC-F - output range 0.5 to 5.0 kg/h, depending on tool back pressure - nitrided and polished, with integrated screw tip

Condition: excellent (used), Year of construction: 2005, Description Stork N-2500-1400 250 tons Year of manufacture:2005 Spraying unit: Spraying pressure (max.) 2100 bar Dujljpxnuxeinat Djt spraying volume (max.) 595 ccm Injection weight PS (max.) 565 g spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons clamping force 275 tons size of clamping platen (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. Mold weight Mold height (min./max.) 200-685 Clearance between tie bars 585-585 mm Ejection stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) Fail-safe device (light barrier) 2 air ejectors or air controlled valve gate nozzle Hydraulic nozzle and mold valves Switchover to holding pressure by pressure measurement in the spraying cycle. incl. Labotek granulate dryer. Eta Control to reduce power consumption. Machine is under power and can be inspected and tested by prior arrangement.

Condition: new, Year of construction: 2025, Functionality: fully functional, This new 48Volt 100Ah charger has a 5-pin 16Ah 380Volt Euro plug. Charging cable with REMA plug 320 A Duelsvvnyreinat Det

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, - Complies with CE standards. - Used for cutting aluminum PVC profiles - Hydro-Pneumatic cutting process - Adjust cutting speed according to profile - Right and Left -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 can cut at fixed angles. - Pneumatic vertical and horizontal press Duolsrahzgeinat Dot - Ø550 millimeter Aluminum saw with diamond tip - Roller conveyor is available (3 meters right and left) - Oil spray system - 3 Kw Motor and Hydro - check for precise cutting

Year of construction: 2018, Condition: good (used), Pan Stone D V 500 PCD elastomer press, Duolevvlz Hsinat Det Year of manufacture 2018, Control B & R Touch Display 2018, Clamping force 5000 KN, Demolition max 800/300/300 mm, Clear width of lifting units 870 mm, Upper piston press, Clamping 800 x 800 mm, Magnetic clamping, Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Oil preheating,

Condition: new, Year of construction: 2025, Functionality: fully functional, warranty duration: 12 months, total width: 3,100 mm, total length: 2,250 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,345 kg, PELTOC drum winder is developed more then 10 years different pipe and hose winding solutions development experiences. There has been used only solutions what have been worked a years and been proved by self. Peltoc develop all produced machines only quality producer and all over world widely available standard components, considering on development highest service factory, minimal wear and service parts, lowest energy consumption and thanks for that we can ensure longer lifetime and more reliable solutions. Producer: PELTOC OÜ Model: HOHL 2400 Maximum drum rotation speed: 1 - 30 RPM (Option up to 200RPM) Maximum winding speed m/min: 0 - 200m/min. (Depends from drum inside diameter) Maximum full load drum weight: 1700 kg (Option up to 4000Kg) Delinatsqwg Hyj Dsut Maximum drum outside diameter: 2400 mm (Option up to 4000mm) Minimum drum diameter to lift from floor: 1000 mm (Option from 600mm) Maximum drum outside width: 1250 mm Minimum drum outside width: 730 mm ( Option to 300mm. Need to order extra spacers for narrower drums) Drum center hole diameter: 000 mm (For each client size) Compressed air: Not needed! Electricity: 400V / 50 Hz / 3 Faze. Machine have 16A plug Weight: 1345 Kg Dimensions: 2250 x 3100 x 1882 mm (L x W x H)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 400 Aluminyum Pvc Çift Kafa Kesim Makinası, - Conforms to CE standards. - Cutting Accuracy +/- 0.1 millimeter - Automatically adjusts to two angles, 90 and 45 degrees inward. - Automatic slicing at 90 and 45 degrees at two angles - Touch Color Panel Display - Connecting Remotely and Providing Technical Support - 2 X 500 millimeter Saw - Ø450 mm saw has a saw exit distance of 14 cm and 70 mm x 2 profile cuts - Ø500 mm saw has a saw exit distance of 16.5 cm and 80 mm x 2 profile cuts - Saw speed adjustment - 6 meter cutting feature - Wedge slicing Duolinjramvasat Dst - Multi-language support - Unlimited Measure Memory Capacity - Conveyor Right / Left profile support unit - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps - Air gun OPTION - Barcode printer - Cutting list transfer via USB stick - Hydro - pneumatic hydro-check controlled saw movement

Condition: good (used), Year of construction: 2018, Pan Stone D V 200 PCD elastomer press, Year of manufacture 2018, Control B & R Control Touch Display, Clamping force 2000 KN Demolition max 800/300/300 mm, Clear width of lifting units 570 mm, Upper piston press, Clamping 800 x 800 mm, Magnetic clamping, Dolinatovvly Nj Dout Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Oil preheating,

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 4000 S Full Otomatik Alüminyum Pvc Çift Kafa Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø550 mm saw. - Complies with CE standards. - Hydro - pneumatic hydro-check controlled saw movement - Cutting accuracy +/- 0.1 mm - Automatically adjusts to two inward angles of 90 and 45 degrees - Automatic slicing at 90 degree angle - 10" touch color panel display - Remote connectivity and technical support - 2 Ø550 mm saws - Servo motor motion system - 180 mm saw exit distance and cut 80 mm x 2 profiles - Hydro-check saw speed adjustment - 8 meter cutting feature - Multi-language support - Unlimited size capacity - Spray saw cooling system Dolineramypjat Dout - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Data transfer via USB memory

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 501 PVC KOL YERİ DELME KANAL AÇMA SU TAHLİYE MAKİNESİ, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of PVC profiles. - Ability of copy head to work on vertical axis - Horizontal axis operation of the triple drilling system Deleramz Asinat Djut - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility to operate triple drilling copy milling cutter or grooving system as one - Comfortable working thanks to the powerful motor - Right conveyor system (1 meter)

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 101 S PVC Tek Köşe Kaynak Makinası, - Conforms to CE standards. - Weldable angle : All angles between 25 - 180 degrees. - Welded profile maximum height 150 millimeters Duolinera Niasat Det - Minimum height of welded profile 40 millimeters - Upper pistons are individually compressible - Left moving table system available - Profile clamping is practically done with the pedal - PLC control system available - The heating unit has thermostatic control - The degree of the heating plate can be easily changed via the digital display - Heat temperature, welding time and pressure can be adjusted for different profile types - Time saving thanks to easy mold change system.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, - Possibility of opening a water drainage channel for PVC profiles Djlinatjra Nqte Dout - Possibility for three groups to work separately - Ability of the water drainage system to operate in angled position - Pneumatic profile clamping system - Fully automated system operation

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 5000 PVC 3 AXIS CNC MILLING MACHINE, - It can perform DOOR, WING, ARM and SLIDING operations on PVC profiles thanks to 3 different motors. - 3 axis servo motor system Duoliora Nxaenat Dst - Easy point-to-point programming - Unlimited memory capacity - Water drain opening feature (inside) - Metering system with right and left support

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard Delinjrbf R Tsat Dout - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, - Automatically removes the burrs formed on the inner and outer corners and upper and lower surfaces of PVC profile frames due to melting in the corner welding process with high precision and high speed - CNC control system (2 axis) - Ability to work with G Code Duelinorbg Euoat Dot - 160-200 frames can be processed in an 8-hour working period - There are 10 cleaning sets in total. - Cleaning top and bottom surfaces for white and colored profiles - Cleaning top and bottom surfaces for coated profiles - Cleaning of internal and external seal bearings - Cleaning angular and radii surfaces - Unlimited memory capacity 10" LCD HMI control panel provides ease of use for the operator - Long life thanks to automatic lubrication system. (activated in 60 frames) - Linear slide system - Very simple to use and program thanks to its unique software - Brush stand system is available for easy rotation of profiles - Easy profile programming (HANDWHEEL) handle - Operating speeds can be adjusted at desired speeds

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. Dusljrbid Isinat Dst - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 1000 DİJİTAL METRE, - 3 Meter length - +/- 0.1 mm measurement accuracy - 220 Volt voltage - Touch screen - One-button push-back feature that allows the cut product to be easily removed from the mold - Design for ease of use - Easy calibration Duslerblaljinat Djt

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 441 Portatif Kesim Makinası Ø300 mm, - Used for cutting aluminum & PVC profiles - Double spring system and saw guard safety cut - Cutting on the top table Ability to cut at all desired angles between -45 and +45 degrees - Right and left angle stabilization at 0, 15, 22.5, 30, 45 degrees OPTIONS - Lower cabinet body system - Right-left meter system Dujlinatercmzde Det - Pneumatic press and cooling system - Diamond tipped saw

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system - Pneumatic system Djlorcm D Deinat Dsut

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 4550 PROFILE PROCESSING AND CUTTING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen Duolinatjrcm Rue Dot - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2025, machine/vehicle number: PVC Çift Kafalı Üretim Makine Set, - Provides 80 - 120 window production in 8 hours working environment. - It is our set that provides fast production to the customer with different machine options. - 380 volt or 220 volt options are available. - Complies with CE (European) standards - Prices delivered to anywhere in the world Dslinorfyzfeat Deut - Former customers from your country who will be your reference MACHINE CONTENT - SC 400 Aluminum & PVC Double Head Cutting Machine (Ø450 & Ø500 mm saw option) - SC 100 PVC Double Corner Welding Machine (0.2 mm welding possibility) - SC 501 Aluminum & PVC Sleeve Drilling, Grooving and Drainage Machine - SC 301 Aluminum & PVC Spacer Cutting Machine - SC 211 Aluminum & PVC Middle Register Lapping Machine (2 blades) - SC 601 Automatic Corner Cleaning Machine You can increase your production capacity with different machine options. Please contact for catalog

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type Djlisrcy Tronat Djut - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system