Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. Fgjdpfx Afsu Sntzsnjk CHF 14500.— excl. VAT From site 4102 Frenkendorf Switzerland

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm Fodpfx Afjh Akbaonegk central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: excellent (used), Catalogue number 7693 Fgedowwr Hdopfx Afnsk TECHNICAL DATA - shaft width: 810mm - max workpiece thickness: 170mm - 4-knife cutterhead * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Fgjdex E T Dmjpfx Afnjk

Condition: excellent (used), functionality: fully functional, working width: 410 mm, planing width: 410 mm, Planer, jointer SCM F410 Specification: • condition - used, after inspection • manufacturer - SCM • model - F410 • working width - 410 mm • table length - 2610 mm • fence adjustable for angle • motor power - 4.0 kW • spindle speed - 5000 rpm • chip thickness indicator • max cutting depth - 8 mm • noise dampening combs at the shaft • motor brake • four-knife shaft, 120 mm diameter, for traditional knives • star-delta starter Fgedpfx Afsx E Srvonek • dust extraction outlet - 150 mm dia • weight - approx. 650 kg • CE marked • overall dimensions: 261 x 90 x 110 cm (L x W x H) Additional information: • very good technical condition • the presented photos show the actual condition of the item for sale • possibility to start and test the machine on site.

Condition: excellent (used), SCM Sintex four-sided planer. Fjdpfx Afex E R Hxenogk

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Fedsunbuvjpfx Afnjgk

Condition: good (used), Year of construction: 1997, LAMEL MOULDER WEINIG HYDROMAT 22 BL Maximum working width : 220 x 140 mm Spindle diameter : 50 mm Infeed : 30 Kw ( Separate Hydraulic station ) Seperate electric cabinet : L 2200 x W 600 x H 2000 mm Fjdpfxjxa Hlks Afnogk 1. spindle : 5,5 Kw 2. 5,5 Kw 3. 7,5 Kw 4. 7,5 Kw 5. 7,5 Kw 6. 11 Kw 7. 15 Kw 8. 37 Kw 9. 7,5 Kw 10. 7,5 Kw Steel cage with gas pistons over machine. External pump for central lubrication( For 200 L lubrication oil barral ) 5 Europallets with spareparts/tools/extra spindles included

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration Fgjdpfsrwmp Usx Afnjk – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Fgsdpfxjx E Smme Afnsk

Condition: new, Year of construction: 2025, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Fsdpfxow Ab Twe Afnegk Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Professional carpentry and furniture workshops Prototyping labs and training centers Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Gross weight 200 kg

Condition: excellent (used), Weinig four-side planer Fedox E Rzpepfx Afnjgk

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller Fodpfxjqv Aive Afnegk - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: excellent (used), Weinig Four-Side Planer Fgsdpfx Asx E Rxuefnsk - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: 5.5 kW bottom spindle, 7.5 kW right and left spindle, and 7.5 kW top spindle - Vertical spindles with vertical and horizontal adjustment - Electrically height-adjustable feed rollers - Electrically height-adjustable top spindle - Steplessly adjustable feed speed - Weinig head alignment device The machine is in very good condition and runs vibration-free.

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Fedelikzfepfx Afnsgk Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Weinig Four-Sided Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW Fodpsx E Rtxofx Afnogk - Electrically height-adjustable feed rollers - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm Fedpfxshh Sflj Afnegk From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW Fgsdpfx Afox E Rh Ajnek - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW - Universal spindle: 7.5 kW - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment In excellent condition. Original. Nothing repainted.

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate Fgodpfjxdakujx Afnjk (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7738 Fgodpfsxcx Ucox Afnjk TECHNICAL SPECIFICATIONS SURFACER/JOINTER: - shaft width: 500mm - 4-knife cutterblock - sound-dampening riving knife/comb - shaft guard - adjustable tilting fence - table length: 2200mm - infeed table length: 1180mm - both tables adjustable THICKNESSER/PLANER: - max thicknessing height: 240mm - thicknesser shaft guard *top side: - anti-kickback fingers - feed roller: toothed, spring-loaded - pressure bars - planer cutterblock - pressure bar - outfeed roller: smooth - adjustable roller in lower table - 2 feed speeds: 7/14 m/min - main motor: 5.5kW - electric brake - extraction port diameter: 150mm - dimensions L/W/H: 2300x950x1100mm - weight: 910kg ADVANTAGES – Italian manufacture – 4-knife shaft – Long tables – Excellent, original condition, never repainted – Used surface planer and thicknesser Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers Fgedpfx Afjw Ipcvsnok - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness Fgsdpfx Aslhrk Sjfnek - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth Fgsdpfxoin Elpo Afnok - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6651 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 4 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm, 4 kW 3) Left vertical: 120 mm, 4 kW 4) Top horizontal: 220 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 top feed-in rollers, toothed, including 2 double rollers - 1 top feed-out roller, smooth rubber - Lower feed-out rubber roller - Pneumatically pressed rollers - Feed through Cardan shafts - Feed motor: 1.1 kW - Lifting motor: 0.37 kW - Electric thickness adjustment - Infeed table length: 1980 mm Fodpfx Afeh Up Iponegk - Side pressure unit - Stepless feed speed adjustment: 8–16 m/min - Central lubrication system - Extraction port diameter: 5 x 140 mm - Fully enclosed in a cabinet - Dimensions (L/W/H): 3400 x 1500 x 1700 mm - Weight: approx. 1670 kg Net price: 39,900 PLN Net price: 9,500 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface Fjdpsvw Rqiofx Afnogk * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)