Condition: good (used), SCM S63 Thicknessing Machine Duedpfxjzcc Ubo Ah Neu Type: S63 Working width: 630 mm 4 knives in the cutterhead 2 rollers in the table Electric height adjustment of the table

Condition: good (used), EMA – Planer/Thicknessing machine Working width: 500 mm Length of planing table: 2,200 mm Duedpfx Ahszcc N Ee Nju 4 knives in the cutterblock

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Type: Powermat 700 Year of manufacture: 2018 Duedpozcb Efofx Ah Nju Number of spindles: 6 Planing width: 230 mm Planing height: 160 mm Spindle diameter: 40 mm Infeed table length: 2,500 mm Feed rate: 0 - 40 m/min Rollers in the table: 1 piece 200 mm and 1 piece 50 mm Control system: Memory plus Spindle arrangement: Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 15 kW Bottom: 11 kW

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW Dusdpfxjiqflbj Ah Nou left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: used, Used machine Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Duedeza I Tkjpfx Ah Nju Min. working height: 3 mm Max. working height: 235 mm Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: excellent (used), CATALOG NUMBER 6679 Duodpfeza Ep Aox Ah Neu TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm Dodeza Enlspfx Ah Nsuu - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Duodpfxjza Ecco Ah Neu Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Dedpfx Ahsza D Spe Nsuu Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7172 TECHNICAL DATA - planing width: 640 mm - max thickness of workpiece: 230 mm - 4-knife cutterhead Top section: - anti-kickback fingers - toothed, powered infeed roller - pressure bar - planing cutterhead - pressure bar - smooth, powered, metal outfeed roller Bottom section: 2 adjustable sliding rollers in the table Djdpjza D I Rofx Ah Nouu - main motor: 5.5 kW - electric table lifting: approx. 0.25 kW - two feed speeds: 0.75 kW - extraction port diameter: 160 mm - dimensions (L/W/H): 1320x1270x1380 mm - weight: 903 kg ADVANTAGES – made in Germany – used thickness planer, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Surface Planer / Jointer, used Dsdpfx Ahsy Emf Ro Nsuu Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: excellent (used), Surface planer Brake motor Undervoltage release Emergency stop NEW motor Various NEW switches CE compliant Total table length: 2900 mm Infeed table length: 1550 mm Dujdpfx Aeyrflnsh Nju Outfeed table length: 1310 mm Working width: 430 mm Working height: 800 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of knives: 4 Knife dimensions: 430 × 35 × 3 mm Rabbeting depth: 20 mm Planer fence L × H = 1000 × 180 mm Fence tiltable up to 45 degrees Motor power: 3.2 kW, 400 V, 50 Hz Dimensions L × W × H: 2900 × 700 × 960 mm Weight: 475 kg

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Djdpfx Ahjy Egmuo Neuu Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram Dodpfx Ahjydmawe Nsuu CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: excellent (used), Year of construction: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle configuration: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Adjustment range of jointer spindle: 5 mm Jointer spindle motor: 5.5 kW Top spindle motor: 4.5 kW Vertical spindle motors: 7.5 kW Motors with brake Feed roller diameter: 140 mm Length of jointer table: 2,000 mm Pneumatic pressure for feed rollers Dujdpfxjy Enlfs Ah Nsu Infeed roller upstream of first lower spindle, pneumatically actuated Left pressure roller before machine infeed CE compliant Including 4 planing heads Approx. dimensions (L x W x H): 3,000 x 1,250 x 1,550 mm Weight approx.: 1,000 kg Note on used machinery: • Technical specifications and prior sale subject to change. • Stated prices are ex works, free loading at location! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Condition: good (used), For sale is a used Holzmann jointer-planer machine with a maximum thickness capacity of 160 mm. The machine is in good condition and has been refurbished and inspected by our qualified technicians. Technical specifications: - 2-knife cutterhead - Planing width 260 mm Dsdpfxeza Anco Ah Nouu - Planing length 1050 mm - Max. thickness 160 mm - Dust extraction port Ø 75 mm - Motor power 3 kW / 4.1 hp The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thicknesser, surfacing, planing Reference: R-E2EZB

Condition: excellent (used), 5.5 kW motor Table length 2 m Duedpfjwm Dz Sex Ah Nsu Table width 52 cm 4 blades Working height 19 cm Electrically adjustable top and bottom

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC Dsdjzb Ifvspfx Ah Neuu MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2008, Four-sided planer MBW623B max. width of the processed element 230mm max. height of the processed element 150mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 150mm 7.5kW 3) vertical left 150mm 7.5kW 4) horizontal upper 230mm 7.5kW 5) horizontal lower 230mm 5.5kW 6) universal 230mm, adjustable at an angle of 360° 7.5kW all spindles adjustable up/down, right/left spindle diameter 40mm feed on Cardan shafts pneumatically pressed shafts smooth adjustment of the feed speed on the inverter Dedjv R Nl Ejpfx Ah Neuu 5.5kW feed motor electric adjustment of the planing thickness pulling rollers in countertop

Condition: good (used), Year of construction: 1981, For inquiries: Zoltán Utasi Plus 36 30 205 7380 pindle configuration: Bottom Right Left Top Bottom Spindle speed: 6000 rpm Working width: 170 mm Working height: 120 mm Jointing table length: 2 m Equipped with Waxilit pump Infinitely variable feed speed: 7–18 m/min Duodpfx Ahjy Nmv De Neu Side pressure roller Motorized pressure beam adjustment Equipped with 5 cutter heads (3 pcs L180 mm, 2 pcs L130 mm) Machine documentation available

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Dujdsv Skayjpfx Ah Neu Weinig 814, Weinig 811, Weinig 806

Condition: excellent (used), CATALOGUE NUMBER: 7816 TECHNICAL DATA Dsdeyyy Egspfx Ah Nouu DDCA - Surfacing cutter length: 180 – 845mm - Surfacing cutter width: 30 – 75mm - Surfacing cutter thickness: 10 – 45mm - Spindle diameter: 30mm - Max. disc diameter: 250mm - 5 spindles: - Left side: 1) Vertical upper: 2.2kW 2) Horizontal lower: 2.2kW Right side: 1) Vertical lower: 2.2kW 2) Vertical upper: 2.2kW 3) Horizontal lower: 2.2kW - Spindles adjustable up/down, left/right - Material pressure: 2 pcs - Smooth feed rate adjustment: 0-10m/min - Spindle diameter: 5x100mm - Dimensions (L/W/H): 1870/2230/1320mm DDGA - Width of workpiece: 35 – 130mm - Thickness of workpiece: 10 – 40mm - Minimum length of workpiece: 200mm - Spindle arrangement: 1) Lower: 5.5kW 2) Right: 5.5kW 3) Left: 5.5kW 4) Upper: 5.5kW - Spindles adjustable up/down - 6-blade heads fitted on upper and lower spindles - Spindle diameter: 40mm - Milling cutters fitted on right and left spindles, max. diameter: 50mm - Spindle diameter: 30mm - 2 feed rates: 4.9kW - Central chain lubrication via oil pump - Spindle diameter: 4x125mm - Dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish made - 5 spindles - Unpainted - Very good condition - Used production line Net price: 52900 PLN Net price: 12600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Year of construction: 2021, condition: as good as new (ex-display), Due to order cancellation 2 x new Tersa planing heads D140x130x50 All original Swiss Made. It doesn't get any cheaper! Duedpfx Aozau Etsh Nsu One-time super cheap set offer

Condition: refurbished (used), 1 x Elektronic Motor Braking Unit Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Dodjzau A Sepfx Ah Njuu Siemens EMG 15

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Dujdpozauzbjfx Ah Nou Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE