Used tube bending machines for sale (165)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Njdpfx Aew Snm Iecboct

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Spindle speeds / ranges 65 - 1750 VARIO rpm DIMENSIONS Njdpfey Hmprox Acboct Length 1200 mm Width 800 mm Height 2400 mm

Condition: ready for operation (used), Year of construction: 2010, A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible. Nedpfjy Nm Uysx Acbect

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg. Ncjdpfx Ajy Ehrfscbot

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° Njdpfsiau Uusx Acbect total power requirement - 50 kW weight of the machine ca. 6 t

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction Njdenfvx Nepfx Acbect - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, neu 2026 090209 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection Ncsdpfx Acswirzfjbjt mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: new, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 111/52, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: documentation/manual, foot remote control, For sale: New/unused Amob MAH 40/3 CNC profile bending machine. We purchased the machine new from Maqfort in 2022. Due to relocation of production and changes in the order profile, we found no use for the machine; it has not even been connected or commissioned. Therefore, it is a brand new machine. Nedpfx Aey Hn Uvscboct Equipment: Hydraulically controlled top roller feed / Can be operated in both vertical and horizontal positions / 3 mechanically driven rollers / Manually adjustable side rolls / CNC control / Movable foot pedal includes digital display, 2 pedals, emergency stop button / 3 standard (hardened) tooling rollers. Price: 25,153 euros. In case of sale, Maqfort will provide installation, commissioning and staff training according to agreement.

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm Ncedpeykl Rzofx Acbjt smallest bending radius: 32 mm motor: 30 kW

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending radius (min.): 90 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Ncodjy Dpgzspfx Acbet Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, tube wall thickness (max.): 2 mm, bending radius (min.): 60 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options Nedpey Dpgnofx Acbsct  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: ready for operation (used), Year of construction: 1966, A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible. Ncedpoy Ax U Esfx Acbet

Condition: good (used), functionality: fully functional, pipe diameter (max.): 28 mm, bending angle (max.): 180 °, bending force (max.): 7 t, overall weight: 250 kg, Bendingcapacity: 3/8" - 2" Bending angle: 180° Revolverbending: 6-fold Ncsdpowzchyefx Acbet Attached bendingtool: Ø 28 mm Country of origin: The Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1.000 x 800 x 950 mm

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit Ncsdpsn Smq Iofx Acbet - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 500 h, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, pipe length (max.): 3,000 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 180 °, overall weight: 300 kg, power: 1.5 kW (2.04 HP), input voltage: 220 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, Metalworking company sell megabender 030 In the equipment have mandrels for tube: 60,3mm x 2mm R120 50mm x 2mm R75 40mm x 2mm R60 32mm x 2mm R100 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic Ncodpfx Acjv Di Dnjbet design (3000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle Stainless steel 2mm steel 3mm cooper and aluminium up to 4mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming Ncedpoyx A Uuefx Acbjt -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: used, functionality: limited functionality, Year of construction: 2002, control type: CNC control, degree of automation: automatic, controller model: VGP3D, pipe diameter (max.): 42 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 2 mm, bending radius (max.): 120 mm, mandrel length: 6,000 mm, number of axes: 5, overall weight: 7,000 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, We offer this used CNC tube bending machine BLM DYNAM4, right/left, year of manufacture 2002. Manufacturer: BLM Model: DYNAM4 Ncedpfeyzy U Dox Acbst Serial number: 482020102005 Year of manufacture: 2002 Weight: 7000 kg Technical specifications: - CNC control: VGP3D – advanced 3D graphical programming software dedicated to tube and rod bending. - Number of controlled axes: 5. - Maximum tube diameter: 42 mm. - Maximum wall thickness: 2.5 mm. - Maximum bending radius: Rm 120 mm. - Bending length: Factory-extended machine, allowing for tube bending up to 6 meters with mandrel – a rarely offered option. - Bending direction: Capability to bend both left and right, enabling the production of highly complex parts. - Additional features: Simultaneous bending and roll bending of arcs. - Machine weight: 7 tons (dry weight). - Light barriers - Metal fencing - Tooling package (on pallet) Service work performed: - The machine has been thoroughly cleaned. - Oil has been flushed and replaced. - Approximately 90% of hydraulic hoses were replaced. - Valve plates have been resealed. - Main motor has been rewound. If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Nodpfoyzyh Dox Acboct Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards. Nodpfoyzya Tox Acboct

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine Njdedzw Hwepfx Acbect existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm

Year of construction: 1980, condition: used, machine/vehicle number: 80246, max. tube-Ø: 60,3 x 3,2 mm max. bending angle: 180 ° arbor rest length: 3000 mm electrical connection: 380 V, 8,6 kW Nsds N Hfpspfx Acbect space needed: 2400 x 5700 x 1500 mm weight: ca. 2500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 Nsdpfxsttagde Acbsct for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings Nedpfeyv N A Hox Acbect - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, R10-R260 Njdpoyv I Tkefx Acbsct 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed

Condition: excellent (used), Pipe bending machine Rothenberger system Bending capacity: 2 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Nedpfx Aceyv A H Eebjct Footprint: Width: 630 mm Length: 680 mm Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg