Used Half Tube for sale (3,277)

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute Bdsdpfx Ajq Ul Rvja Dsb FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Bedpoww Upzjfx Aa Djdb Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Bdedpjv D Uhfjfx Aa Djb Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Bodpfx Aew A H T Aea Djdb Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Bdedpfjwu Rm Rox Aa Deb Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Bdsdowwz Dlspfx Aa Dsb Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Bdedoww Umaopfx Aa Dob Maximum tubelength:

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Bedpfx Aaotrd T Te Dsdb Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm Bdsdexlzr Ajpfx Aa Dsb 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control Bsdewlgnropfx Aa Dedb 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Model: Tubobend 25 Operating hours: 6,493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Performance Data Connected load: 1.4 kW Bending Data Bending capacity (mild steel): Ø 25.0 × 3.0 mm Bdsdjy H I R Repfx Aa Dsb Max. bending radius: 75 mm Max. bending acceleration: 58 °/s Bending accuracy: ± 0.2°

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Bdodpfju Rf E Eex Aa Djb Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Bjdpfx Aew Snm Isa Djdb

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Spindle speeds / ranges 65 - 1750 VARIO rpm Bsdpfx Aoy Hmprsa Dodb DIMENSIONS Length 1200 mm Width 800 mm Height 2400 mm

Condition: excellent (used), Year of construction: 2006, pipe diameter (max.): 120 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 6 mm, bending radius (max.): 200 mm, bending radius (min.): 10 mm, overall weight: 12,500 kg, total length: 5,000 mm, total width: 2,200 mm, power: 12 kW (16.32 HP), Tube bending machine MEWAG - RB 120 A-Digi MACH-ID 9605 Make: MEWAG Type: RB 120 A-Digi Year: 2006 Max.Tube Ø: 120mm Min. Tube Ø: 10mm Max. Wall thickness:6mm Max. Bending radius:200mm Min. Bending radius:10mm Max. bending length:3000mm Bsdpfey E Hu Esx Aa Dsdb 3e dimsion bending:yesmm/min. Power: 12kW Number of tools: 8 Length: 5000mm Width: 2200mm Height: 1mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, empty load weight: 6,400 kg, maximum load weight: 31,600 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2023, loading space volume: 26 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2023, Equipment: ABS, Unladen weight: 6400 kg, Gross permissible weight: 38,000 kg, Tyre size: 385/65 R22.5, Cargo space volume: 26 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underride guard, Front lift axle, Electronic Braking System (EBS), Plug connection 1x15 and 2x7 pins, Anti-spray, You can find an overview of all our available vehicles on our website. Need financing? We offer tailored financing solutions, as well as full-service or telematics services – we are happy to offer you personal advice. Bodpfoy Ihi Aex Aa Dedb

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Bjdpfjuluhwox Aa Dodb Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Bjdpfxsng Exaj Aa Dsdb Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Bjdpfx Ajndn Agsa Dodb Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: Bedonh R Ekspfx Aa Dedb - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. Bedpfx Aajnfvx Nj Dodb The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room Bedpfx Aasndk N As Dodb - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: Bdodpfonfvy Uox Aa Dob - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic Bdedjnh R Suspfx Aa Djb brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result Bdjdeng Amkopfx Aa Djb OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site