Used other woodworking machinery for sale (330)

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Predpfxotw Szae Adljc Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Year of construction: 2025, operating hours: 600 h, condition: like new (used), functionality: fully functional, Maximum height 160 mm / 6 5/16" Maximum width 700 mm / 27-1/2" Saw shafts are fixed. Hydraulic driven, knurled feed rollers are available. The top pressure roller is hydraulically adjustable. When the full speed range of the machine is used, up to 20 meters / 65 feet of cutting can be achieved per minute. TECHNICAL SPECIFICATIONS STANDARD METRIC LENGTH 10'-5" 320 CM WIDTH 7'-5" 230 CM HEIGHT 5'-2" 160 CM APPROXIMATE WEIGHT 8,600 lbs 3900 KG Podpjyvhp Sjfx Adljrc SAW SHAFT MOTORS 2 × 50 KW 2 X 37 KW SAW DIAMETER 11 13/16" 300 MM MINIMUM ENTRY LUMBER WIDTH MIN: 4 3/4" MIN: 120 MM MAXIMUM ENTRY LUMBER WIDTH MAX: 27 1/2" MAX: 700 MM MAXIMUM LUMBER CUTTING HEIGHT MAX: 6 1/4" MAX: 160 MM MIN. & MAX. EXIT LUMBER CUTTING WIDTH MIN: 1/2" MAX: 4 3/4" MIN: 15 MM MAX: 120 MM MIN. LUMBER LENGTH MIN: 3 FEET MIN: 90 CM MAX. FEED SPEED PER MINUTE MAX: 65 FEET / MINUTE MAX: 20 M/MIN

Year of construction: 2014, operating hours: 1,600 h, condition: excellent (used), functionality: fully functional, Menart STM MTRA dump truck, model year 2014, with 1640 operating hours, in very good condition and ready for work. Prodpfxezn H Sgj Adljc

Condition: used, Debarking plant with drum debarker and disc chipper. Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Prsdpfsw N Rxbex Adlec Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Year of construction: 2023, operating hours: 2,470 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1257.01, Wood scanner Luxscan EasyScan Smart NEW OptiCore AI Software Laser cameras 4 Colour cameras 4 3D & scatter lasers 4 Dot lasers (softwood) 4 Automatic camera positioning fix widths LED lighting devices 4 Ingoing lengths min./max. 1800 - 6000 mm Ingoing widths min./max. 40 - 155 mm Prsdeyrpaiepfx Adlsc Ingoing thicknesses min./max. 15 - 60 mm Ingoing widths min./max. (W210) 35 - 210 mm Width tolerance (per board – per bundle) +/- 3 mm Thickness tolerance +/- 3 mm Max horizontal field of view for top/bottom cameras -10 / +40 mm Max vertical field of view for left/right cameras -5 / +15 mm Maximum productivity: 30 boards of 2000 mm per minute 17 boards of 3600 mm per minute 10 boards of 6000 mm per minute Max real speed 180 m/min. 3rd generation of the high-speed optimizing cross-cut saw OptiCut 450 Quantum Operating device OptiCom Pro 15.6" Sawblade diameter 400 mm TCT-sawblade Sawblade bore 30 mm Ingoing lengths min./max. 1800 - 6300 mm Ingoing widths min./max. 40 - 200 mm Ingoing thicknesses min./max. 18 - 60 mm Cross sections generally rectangular Nominal cross sections (without board bend) min. 40 x 18 mm max. 200 x 50 mm max. 190 x 60 mm Feed speed infinitely variable max. 450 m/min. Acceleration max. 50 m/s² Motor power saw 7.5 kW (10 HP) Motor power feed system 15.0 kW (20 HP) Outfeed conveyor with 7 quick ejectors,

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Prjdpfs Adz I Sex Adlsc Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Pjdpfezuz Icex Adljrc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008785, Max width workable: 800 mm Max length workable: 2300 mm Max height workable: 200 mm Psdpfx Aoz S T Twedlerc Working capacity: 7 cicli/min

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. Pedpfx Ae Aayi Hedlsrc DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: used, machine/vehicle number: 008737, Overall length: 7200 mm Overall width: 1000 mm Prodpfez Spaasx Adloc Loading compartment length: 6600 mm Loading compartment width: 330 mm Cutting shaft power: 5.5 KW

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Prjdoyr Dfaopfx Adljc Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Year of construction: 2023, condition: like new (used), Double sided with 6000mm capacity on either side Total of 12000mm total working/ storage capacity for elements 3m height capacity Complete with 2 special fixing arms for one element 4 off additional supports Podpfxsymnh Ue Adljrc Year - 2023 CE Condition - Never been installed. Condition almost as new

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Pedpewuzzrsfx Adlerc Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Prsdpfxey Edpme Adloc Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 22 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008736, Overall length: 1850 mm Overall width: 1450 mm Prjdoz Sn U Nspfx Adlsc Loading compartment length: 800 mm Loading compartment width: 800 mm Cutting shaft power: 11 KW

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, Technical Description – Cassel Metal Shark® Octa Product Description: The Metal Shark Octa is an industrial metal detection system with an octagonal aperture, specifically designed for the reliable detection of metal contaminants in bulk materials or products on conveyor belts or in gravity chutes. It detects ferrous, non-ferrous, and stainless steel particles with high sensitivity. Key Features: Remote monitoring via SHARKNet® software Digital Signal Processing (DSP) for precise and stable detection Octagonal aperture for optimal material flow and detection area High sensitivity – typical detection performance: Ferrous: ≥ 0.8 mm Non-ferrous (e.g., aluminum): ≥ 1.0 mm Stainless steel: ≥ 1.2 mm (depending on the product and size) Automatic calibration and compensation of product effects Pjdpjztl Hyofx Adlsrc Touchscreen display with user-friendly, multilingual interface Hygienic stainless steel housing, available in IP65/IP66 Power supply: 100–240 V AC, 50–60 Hz Outputs: Relay, 4–20 mA, digital inputs/outputs, Ethernet, USB Application areas: Food industry, chemical industry, pharmaceuticals, recycling, wood and plastics processing Advantages: Excellent noise suppression Reliable continuous operation 24/7 Easy integration into existing systems Support for HACCP, IFS, BRC, and other QM systems

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, Selling a puttying line consisting of a loading table, puttying machine, UV lamps, and unloading table. Psdpfxsxd Tf Es Adljrc

Condition: used, machine/vehicle number: 005446, X axis working area: 3000 mm Y axis working area: 1300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 112 Prjdpfx Aowuciqedljc

Year of construction: 2005, condition: used, Film Slitter Manufacturer: Wulf Maschinenbau Type: WSH 700 Year of manufacture: 2005 Technical data Roll width: 50 - 700 mm Unwind roll diameter: max. 800 mm Pedpfxez Ef Ixj Adljrc Rewind roll diameter: max. 800 mm Unwind mandrel diameter: 6 Rewind mandrel diameter: 6 Cutting system: Block cutter Strip width: 15 - 700 mm Cutting speed: 10 - 100 m/min Material thickness: max. approx. 2 mm (depending on the material) Material selection: PVC, PE, PP, paper Web tension: max. 5 N/cm Dimensions Unwind station Length: approx. 1300 mm Width: approx. 1600 mm Height: approx. 1200 mm Weight: approx. 500 kg Cutting unit Length: approx. 1100 mm Width: approx. 2200 mm Height: approx. 1500 mm Weight: approx. 1300 kg Rewind station Length: approx. 1600 mm Width: approx. 1700 mm Height: approx. 1200 mm Weight: approx. 700 kg Connection values Connected power: 25 kW Frequency: 50-60 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Prjdpfx Aszc Hkyodlec

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Main Electrospindle power: 5.6 KW Predpfeztkb Ajx Adljc Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 36 Total number of tool changer positions: 30 Predpfxsy Nkpns Adloc

Year of construction: 2004, condition: used, functionality: fully functional, Price including with dismantling. Excellent condition. Pjdpfx Adsyyz Euelsrc Included in the set infeed centering system with Cambio 66 and outfeed.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Pjdpjy Ah Nfofx Adlorc Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Prodpfx Adowuciwsloc Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3