5 Axis CNC Routers

MORBIDELLI AUTHOR X5

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Ljdpfsy D Rv Djx Ac Isab

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Laedjxy Tmnepfx Ac Ieb

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area X: 2950 mm Working area Y: 1250 mm Workpiece passage Z: 160 mm 5-axis electrospindle, HSK 63F interface Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Tool changer with approx. 12 positions Vacuum clamping system for "TV" crossbeams Laser positioning system for crossbeams and suction cups Vacuum pump 100 m³/h Pneumatically controlled lifting device CE safety system with bumper CNC control PC Office with integrated computer Ljdpfx Acjy Sgfwo Ieab Programming system WOP Xilog Plus

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,460 mm, travel distance Y-axis: 1,615 mm, travel distance Z-axis: 400 mm, number of axes: 5, overall weight: 3,500 kg, spindle motor power: 11,000 W, spindle speed (max.): 20,000 rpm, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working field: X 3050 mm, Y 1348 mm, Z 400 mm • Rapid speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: ball screw in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C axis rotation: 640 degrees • B axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool room in X axis • Tool changer positions: 12 • Max tool diameter: 240 mm • Max tool length: 220 mm • Max tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protection system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y direction): 5 • Vertical spindles (X direction): 8 • Horizontal spindles (X direction): 4 • Horizontal spindles (Y direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drilling tool holder: M10 • Pneumatic stroke: 60 mm Additional equipment Ledpfjy Ndn Rsx Ac Ioab • Chip conveyor (included) • Vacuum pump 250 m3/h

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Laedol Txw Hjpfx Ac Ieb Operating Units: 12 nr

Condition: ready for operation (used), Year of construction: 2007, number of axes: 5, overall weight: 6,550 kg, This 5-axis MORBIDELLI Author X5 was manufactured in 2007. It features a powerful spindle that was completely overhauled in 2022, ensuring optimal performance. The machine includes a circular carousel tool changer and comes with multiple vacuum pods for workpiece holding. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Condition: Well-maintained and in good overall condition • Spindle: Completely overhauled in 2022; new shaft and new bearings • Power supply: 400 V, 50 Hz, 3-phase + neutral • Short-circuit current (Icc): 10 kA • Centralized lubrication system: PAG-50N • Tool changer: Circular carousel type Additional equipment • Vacuum pump: Becker VTLF 250; capacity 244/286 m³/h • Workholding: Multiple vacuum pods/suction cups for workpiece holding Laodpfey Egw Tex Ac Ieb

Condition: used, machine/vehicle number: 008481, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Laedpfey Edpmox Ac Ieb Total number of drilling spindles: 23 Total number of tool changer positions: 36

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile Ljdpjrbiv Asfx Ac Ioab - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Lsdoyzy S Nepfx Ac Isab Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AL 00 - 647, functionality: fully functional, 5-axis CNC machining center Software: SCM Xilog Plus Operator software: SCM Panel-Mac X = 3470 mm Y = 1240 mm Z = 180 mm 6 cross beams 6 loading aids Rear & middle stop rows Vacuum pump 90 m³/h Vacuum cup positioning with crosshair laser Disc tool changer with 12 tool positions 5-axis milling spindle 360° 11 kW 20,000 rpm Tool interface HSK 63-F Handheld control unit Drilling head X = 7 Y = 5 X horizontal 2 x 2 Lsdpfoyyb N Tjx Ac Ioab Y horizontal 1 x 2 Grooving saw with 5-axis milling spindle Safety device "Bumper" Central lubrication

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Laedpfjw I U E Aex Ac Ijb Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: AL/009416, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 400 mm, number of axes: 5, Equipment: CE marking, 5-AXIS CNC WORKING CENTER MORBIDELLI MOD. AUTHOR X5.55 EVO – CE RULES - Working dimensions: X 5.500 mm Y 1.700 mm Z 400 mm - Chip conveyor belt for wastes - Automatic centralized lubrication system - Optimized and centralized dust extraction system - 5-axis milling unit 11 kW (15 HP), HSK-63 PRISMA - Liquid-cooled electrospindle - Drilling unit with No. 18 vertical spindles and No. 6 horizontal spindles - TV-MORBIDELLI worktable with 10 supports, L = 1,500 mm - Laser device for suction cup positioning - Saw blade Ø 300 mm - No. 2 additional central side stops Lodpjywd Adsfx Ac Ijab - No. 2 additional side stops - No. 30 suction cups - Tool magazine with 12 positions - Becker vacuum pump 250 m³/h (year 2022) - NUM CNC control - No. 10 lifting devices to assist loading - Voltage: 400 V / 50 Hz - S/N AL/009416 - Year 2009