Used multi spindle machines for sale (214)

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 Lsdjin Ub Tspfx Adwshg large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, TECHNICAL DETAILS - maxi diameter : 26 [mm] - maxi feeding length : 125 [mm] - spindle speed : 366 – 5020 [rpm] - number of spindles : 6 - central block stroke with cone : 85 [mm] with hydraulic : 200 [mm] - cross stroke with cone : 36 [mm] with hydraulic : 56 [mm] - dimensions : 5 728 x 1 080 x 1 816 [mm] - weight : 5 200 [kg] EQUIPMENT - sub-spindle - foot and drum Lodpfx Adouhanajwjhg

Condition: used, TECHNICAL DETAILS - bar clearance : 5-20 [mm] - maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - spindle rotation speed : 5 000 [rpm] - spindles maxi power : 15 [kW] - drilling/tapping maxi power : 3.7 [kW] - number of numerical axes : 23 - number of cross slides : 8 - counter operation slide : 1 - end units : 7 - number of sub-spindle : 1 - sub-spindle motor power : 1.1 [kW] - dimensions : 5880 x 1400 x 1950 [mm] - weight : 7 200 [kg] EQUIPMENT - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor Lodpfx Adjuhaq Uewohg - turning tools-holders - IEMCA PRA 40/33F bar feeder - number of hours 31600

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC Ljdpfx Aeuhatpedwohg - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - Number of spindles : 9 - Bar capacity : 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque : 18.5 [Nm] - Max. spindle speed : 7000 [rpm] - Stroke X : 70 [mm] - Stroke Z : 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke X : 110 [mm] - Travel Z : 125 [mm] COUNTER SPINDLE 7 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke Z : 300 [mm] POWER SUPPLY Lsdpfx Adouhaq Iowehg - Supply voltage : 400 [V] - Installed power : 109 [A] DIMENSIONS - Floor dimensions : 9.100 x 1.805 [mm] - Machine height : 2,800 [mm] - Machine weight : 18.500 [kg] MACHINE HOURS - operating hours : 82000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D - Chips conveyor - Bar loader : SIR 36/33 F - Coolant tank : KNOLL VRF 450/2600 * with high pressure pump * with paper filtration * capacity : 2600 [l]

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools Lsdpfor Nc Ufsx Adwehg working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl TECHNICAL DATA Lhodpfx Adst Du Tdewsg workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: B2235, controller manufacturer: Siemens, controller model: Sinumerik, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Lsdpfxewx Nqis Adwshg TECHNICAL DETAILS Supply voltage: 400 V~ Power consumption: 16.3 kVA Current consumption: 25 A Control voltage: 24 V= EQUIPMENT - Chip conveyor included

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm Ljdpfxjn Uum Hj Adwjhg counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: excellent (used), Index MS42C Lhodpfjfdr R Usx Adwsg HBF rod guide Oil distributor Flaps with clamping screws

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard Blitz K90 A D, No. B2235, year 1998, control SIEMENS Sinumerik, with chip conveyor 2 identical machines available Lsdpfx Adjunw Hbewshg

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. Lhodjqhkukjpfx Adweg The machine is still in production. Viewing possible by arrangement.

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Lhedpfxeuqngqs Adwjg Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), Lsdpfx Adsuhaqnswohg 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - Hirth cylinder barrel locking - Bar feeder Iemca PRA40/33F

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] Ljdpfxsuhaqzo Adwshg - Spindle speed : 620-6 000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - 1 Bar feed cam parts 60 [mm] - 1 Auxiliary camshaft drive - 1 Pick-up. 20 [mm] with lever - Hirth cylinder barrel locking - 8 cross slides, stroke 30 [mm], optional - Central slide, stroke 60 [mm] - Cutting oil tank with magnetic drum conveyor - Coolant pump capacity 150 [l/min] - Iemca PRA52/33F bar loader n°020651PA03, year 2006

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER Lodsuhatcepfx Adwjhg * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 16 [mm] - maxi feed length : 60 [mm] - number of spindles : 6 - number of transversal slides : 6 - number of spindle speeds : 16 - spindle speed : 1200-8000 [rpm] - maxi production : 80 [parts/min] - number of independent available feeds : 4 - independent feeds normal stroke : 45 [mm] - sizes : 5000 x 900 [mm] - weight : 3000 [kg] EQUIPMENT Lhjdpfx Adeuhaugswjg - sub-spindle with brake - counter operation device - all turning tool-holders - bar feeder Pietro Cucchi AN-BN - coolant tank : * with pump

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Lodpfx Adexqm Tvowehg

Condition: used, Cnc multispindle lathe INDEX MS32C Lhedpfext U Hpsx Adweg

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 - Number of counter-spindles : 1 - Hirth teeth - Number of cross slides : 8 - Max. production : 50 [parts/min] SPINDLES * Max. bar diameter : 21 [mm] * Spindle speeds : 620-6000 [rpm] COUNTER-SPINDLE - Mechanical counter-spindle POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 4700x1200 [mm] - Machine height : 2250 [mm] - Machine weight : 5850 [kg] EQUIPMENT - CNC : Fanuc Power mate - Oscillating stop Lhjdpfx Ajwdaglodwsg - Coolant tank - Cooling unit - Bar loader : PRA 40/33F - Bar holder and stand

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 - Number of counter-spindles : 1 - Hirth teeth - Number of cross slides : 8 - Max. production : 50 [parts/min] SPINDLES * Max. bar diameter : 21 [mm] * Spindle speeds : 620-6000 [rpm] COUNTER-SPINDLE - Mechanical counter-spindle POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 4700x1200 [mm] - Machine height : 2250 [mm] Ledpfx Adewdag Sewjhg - Machine weight : 5850 [kg] EQUIPMENT - CNC : Fanuc Power mate - Oscillating stop - Coolant tank * with high-pressure pump : 60 [bars] - Cooling unit - Bar loader : PRA 40/33F - Bar holder and stand

Condition: excellent (used), Year of construction: 1993, - Gildemeister original pneumatic pick-up Ljdjkwcx Sjpfx Adwohg - Oscillating arm of resumption passage 25 - 1 detector for drill bit breakage - Bar drop exclusion cylinder - Balluff BMC 8 - Bar loader IEMCA PRA 52/31 P

Condition: used, Cnc multispindle lathe TORNOS MULTIDECO 26/6 Lhodpfjuhaqhox Adwsg

Condition: used, TECHNICAL DETAILS - Minimum/maximum bar diameter : 8-25.4 [mm] - Maximum workpiece length : 120 [mm] - Spindle speed : 5,000 [rpm] - Spindle power : 18 [kW] - Number of digital axes : 17 - Barrel locking with Hirth teeth - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8,500 [kg] MACHINE HOURS - Powered hours : 63,341 [h] EQUIPMENT - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling machine - Pick-up machine - Turning tool holders - Bar feeder: IEMCA SIR 25 P - KNOLL lubrication tank Ledpfsuharfex Adwohg - Chip conveyor - Cutting oil air conditioning

Condition: used, TECHNICAL DETAILS - Min/max bar diameter : 8-25.4 [mm] - Max. part length : 120 [mm] - Spindle rotation speed : 5000 [Rpm] - Spindle power : 18 [kW] - Number of numerical axes : 17 - Drum lock through Hirth denture - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8500 [kg] Lhodouharxjpfx Adweg - Number of working hours : 66.850 [h] EQUIPMENT - CNC : TORNOS FANUC PNC DECO - Lubrication tank: KNOLL * with high pressure pump - Bar loader : TORNOS ROBOBAR MSF-522 - Chip conveyor - Cooling unit: HYFRA