Used multi spindle machines for sale (189)

Condition: used, TECHNICAL DETAILS - Number of spindles : 9 - Bar capacity : 26 [mm] MAIN SPINDLES 1 TO 6 - Nominal torque : 18.5 [Nm] - Max. spindle speed : 7000 [rpm] - Stroke X : 70 [mm] - Stroke Z : 125 [mm] MAIN SPINDLES 8 AND 9 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke X : 110 [mm] - Travel Z : 125 [mm] COUNTER SPINDLE 7 - Nominal torque : 15 [Nm] - Max. spindle speed : 10000 [rpm] - Stroke Z : 300 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Installed power : 109 [A] DIMENSIONS - Floor dimensions : 9.100 x 1.805 [mm] - Machine height : 2,800 [mm] - Machine weight : 18.500 [kg] MACHINE HOURS Ksdpeuhaq Iefx Ahvedi - operating hours : 82000 [h] EQUIPMENT - CNC Siemens Sinumerik 840D - Chips conveyor - Bar loader : SIR 36/33 F - Coolant tank : KNOLL VRF 450/2600 * with high pressure pump * with paper filtration * capacity : 2600 [l]

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. Kjdpfsn Uum Hjx Ahvedi TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), Kjdpouhaqnsfx Ahvodi 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - Hirth cylinder barrel locking - Bar feeder Iemca PRA40/33F

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6 000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - 1 Bar feed cam parts 60 [mm] - 1 Auxiliary camshaft drive - 1 Pick-up. 20 [mm] with lever - Hirth cylinder barrel locking - 8 cross slides, stroke 30 [mm], optional - Central slide, stroke 60 [mm] - Cutting oil tank with magnetic drum conveyor - Coolant pump capacity 150 [l/min] - Iemca PRA52/33F bar loader n°020651PA03, year 2006 Kodpfjuhaqzex Ahvedi

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] Kdsdouhatcspfx Ahvji - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 16 [mm] - maxi feed length : 60 [mm] - number of spindles : 6 - number of transversal slides : 6 - number of spindle speeds : 16 Ksdpfx Ahsuhaugsvodi - spindle speed : 1200-8000 [rpm] - maxi production : 80 [parts/min] - number of independent available feeds : 4 - independent feeds normal stroke : 45 [mm] - sizes : 5000 x 900 [mm] - weight : 3000 [kg] EQUIPMENT - sub-spindle with brake - counter operation device - all turning tool-holders - bar feeder Pietro Cucchi AN-BN - coolant tank : * with pump

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard Blitz K90 A D, No. B2235, year 1998, control SIEMENS Sinumerik, with chip conveyor Kdedpfeunw Hbjx Ahvsi 2 identical machines available

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. Ksdpfouqngqex Ahvodi The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised

Condition: excellent (used), Year of construction: 1995, - Pneumatic pick-up - Pick-up brake - Axial control station 5 - Oscillating pick-up arm passage 25 - 1 tool breakage detector - Bar drop cylinder - Siemens OP5 panel Ksdpouq A Ayjfx Ahvsdi - IEMCA PRA 40/42P bar loader

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Kdedpoqhkukjfx Ahvsi

Condition: excellent (used), Index MS42C Kdedpfx Ahjfdr R Usvsi HBF rod guide Oil distributor Flaps with clamping screws

Condition: new, Index Traub MS32 hydraulic pump PLP20.14D0-82E2-LEB/EA-N-EL-FS Casappa Storage traces Kdodswcq Tyjpfx Ahvei

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: B2235, controller manufacturer: Siemens, controller model: Sinumerik, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 400 V~ Power consumption: 16.3 kVA Current consumption: 25 A Ksdpfxjwx Nqio Ahvsdi Control voltage: 24 V= EQUIPMENT - Chip conveyor included

Condition: excellent (used), Year of construction: 1997, Pick-up Kdsdpfowbz Npex Ahvoi Full loader

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Kdodpfsxqm Tvex Ahvei

Condition: excellent (used), Year of construction: 1993, - Gildemeister original pneumatic pick-up Kdodpfx Ahjkwcx Sjvei - Oscillating arm of resumption passage 25 - 1 detector for drill bit breakage - Bar drop exclusion cylinder - Balluff BMC 8 - Bar loader IEMCA PRA 52/31 P

Condition: used, Cnc multispindle lathe TORNOS MULTIDECO 26/6 Kdedpfx Aouhaqhjhvei

Condition: used, TECHNICAL DETAILS - Minimum/maximum bar diameter : 8-25.4 [mm] - Maximum workpiece length : 120 [mm] - Spindle speed : 5,000 [rpm] - Spindle power : 18 [kW] - Number of digital axes : 17 - Barrel locking with Hirth teeth - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8,500 [kg] MACHINE HOURS - Powered hours : 63,341 [h] EQUIPMENT Kedeuharfepfx Ahvodi - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling machine - Pick-up machine - Turning tool holders - Bar feeder: IEMCA SIR 25 P - KNOLL lubrication tank - Chip conveyor - Cutting oil air conditioning

Condition: used, TECHNICAL DETAILS - Min/max bar diameter : 8-25.4 [mm] - Max. part length : 120 [mm] - Spindle rotation speed : 5000 [Rpm] - Spindle power : 18 [kW] - Number of numerical axes : 17 - Drum lock through Hirth denture - Dimensions : 3500 x 1600 x 1950 [mm] - Weight : 8500 [kg] - Number of working hours : 66.850 [h] EQUIPMENT - CNC : TORNOS FANUC PNC DECO - Lubrication tank: KNOLL * with high pressure pump Kdsdpfx Aheuharxjvji - Bar loader : TORNOS ROBOBAR MSF-522 - Chip conveyor - Cooling unit: HYFRA

Year of construction: 2016, condition: excellent (used), MORI-SAY TMZ 8/67, year 2016, like new, only 1 year and half production. – Cucchi-BLT bar-loader Bundle for 5 m bar long with 52 mm bar capacity Machine with : – Hirth coupling Kedpfx Asir Ikdohvedi – Collets Hainbuch BZISK80 – Siemens SINUMERIK SOLUTION LINE 840 SL for driving 8 spindle with C axis 8 CN frontal slides 8 CN cross slides : stations 1, 2, 3, 4, 7, XZ axis stations 5, 6, Y axis with 3 fixed stations 8, U axis part-off or driven toolholders stations 8, Y axis for back burring with 3 fixed 3 driven toolholders – Swarf conveyor with magnetic drum – Arm part catcher – Belt parts conveyor – Kraft and Bauer fire system – Losma HP Pump 70 bars, 100 L/min – Chiller green Box – UAS Fume extractor Machine in good condition like new, please ask for more informations.

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 Kedpfjwdaglsx Ahvodi - Number of counter-spindles : 1 - Hirth teeth - Number of cross slides : 8 - Max. production : 50 [parts/min] SPINDLES * Max. bar diameter : 21 [mm] * Spindle speeds : 620-6000 [rpm] COUNTER-SPINDLE - Mechanical counter-spindle POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 4700x1200 [mm] - Machine height : 2250 [mm] - Machine weight : 5850 [kg] EQUIPMENT - CNC : Fanuc Power mate - Oscillating stop - Coolant tank - Cooling unit - Bar loader : PRA 40/33F - Bar holder and stand

Condition: used, TECHNICAL DETAILS - Number of spindles : 8 - Number of counter-spindles : 1 - Hirth teeth - Number of cross slides : 8 - Max. production : 50 [parts/min] SPINDLES * Max. bar diameter : 21 [mm] * Spindle speeds : 620-6000 [rpm] COUNTER-SPINDLE - Mechanical counter-spindle POWER SUPPLY Ksdjwdag Sjpfx Ahvodi - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 4700x1200 [mm] - Machine height : 2250 [mm] - Machine weight : 5850 [kg] EQUIPMENT - CNC : Fanuc Power mate - Oscillating stop - Coolant tank * with high-pressure pump : 60 [bars] - Cooling unit - Bar loader : PRA 40/33F - Bar holder and stand

Condition: used, SLAT/CALENDAR CLOSING MACHINE PNEUMATIC MACHINE FOR CLOSING PATENTED S/C PROFILE Kdodpjxl Ryiofx Ahvsi

Condition: used, TECHNICAL DETAILS - number of spindles: 6 - maxi bar diameter: 26 [mm] - feed length: 125 [mm] - spindle speed: 530 – 3 750 [rpm] - mini/maxi machining time: 0.53/170 [s] - dwell: 0.6 – 1.1 [s] - motor power: 18.5 [KW] - dimensions: 6 310 x 1 450 - weight: 7 250 [kg] EQUIPMENT - 5 drilling devices Kdsdpfjuhamvex Ahvoi - frontal thread rolling head in position 3 - tangential thread rolling head in position 5 - IEMCA PRA 40/33P 1995 bar feeder - foot - drum.

Condition: used, Year of construction: 2006, Used INDEX MS 32 C lathe Equipment: -2 NCU -SIR MS32P with shelves, length 3300 mm, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable inputs/outputs -4 tool breakage checks -1 NCU1 and 3 NCU2 rotary tool drives -1 WTO stroke doubler, 3 positions, motorized on station 1 -2 drilling units with 6044 motor sold with the machine. Kjdpsxgh Elofx Ahvsdi -Transmit Equipment listed below with : CNC axis: 1.1 XZ 1.2 Z 2.1 Z 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ