GILDEMEISTER GM20AC

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, pressing force: 86 t, stroke length: 215 mm, overall weight: 7,300 kg, TECHNICAL DETAILS Pressing force: max. 850 kN Stroke: max. 215 mm Operating pressure: max. 300 bar Follow-up time: max. 95 ms Follow-up travel at 220 mm/s: max. 10 mm Follow-up travel at 160 mm/s: max. 8.5 mm Safety distance: min. 190 mm MACHINE DETAILS Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V DC Dodpfx Ajz Hvgzsl Aowc Compressed air connection: 6 bar Weight of the press: 7,300 kg

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Dwsdji Ewn Ejpfx Al Ajc Manufacturer: Pfiffner Serial number 1101141101 Operating hours: 42,500 Footprint: 14m x 8m

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, operating hours: 23,390 h, pressing force: 85 t, overall weight: 8,600 kg, controller model: TASC 6000, operating pressure: 300 bar, TECHNICAL DETAILS Pressing force: 85 t Pressing force: 850 kN Operating pressure: 300 bar Djdpfx Aez Hxtdol Aowc MACHINE DETAILS Control system: TASC 6000 Control voltage: 24 V Follow-up time: 95 ms Follow-up distance at 220 mm/s: 10 mm Follow-up distance at 160 mm/s: 8.5 mm Safety distance: 190 mm Voltage: 3 × 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Compressed air connection: 6 bar Dimensions & Weight Dimensions (L × W × H): 2,500 × 1,500 × 2,000 mm Machine weight: 8,600 kg Operating hours, hydraulics: 23,390 h

Condition: used, machine/vehicle number: H2X386E52851, Year of construction: 2014, operating hours: 4,974 h, load capacity: 1,600 kg, lifting height: 4,625 mm, mast type: triplex, overall weight: 3,320 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 4,625 mm Dwsdpfxsz Ixcns Al Aec MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Rest voltage: 48.51 V Service valid until: 10/2027 Safety inspection valid until: 10/2027 Machine type: Electric forklift Dimensions & Weight Dimensions (L × W × H): 3,200 × 1,100 × 2,121 mm Weight: 3,320 kg Operating hours: 4,974 h EQUIPMENT Former Linde full-service unit Semi-cab with windshield and wiper Roof window White, non-marking tires LED work light, front LED work light, rear Safety light, rear Comfort seat with lumbar support Charger Hydraulic function: 3rd valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if collection is not made within the specified period. Outstanding storage fees must be paid in full before collection. Lot number: 110

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Dwjdpfxeyghcre Al Aoc Everything is in working condition, recently serviced and technically inspected. Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were sourced from Sweden. If interested, please contact me for further details, photos, pricing, or to arrange an inspection.

Condition: used, machine/vehicle number: P21120H01993, Year of construction: 2017, operating hours: 8,479 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 8,255 mm Load capacity: 1,600 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,250 x 3,430 mm Own weight: 4,100 kg Year of battery manufacture: 03/2018 Battery voltage: 48 V Battery capacity: 775 Ah Rest voltage: 50.4 V Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 8,479 h EQUIPMENT Former Linde full-service unit 3rd auxiliary valve 4th auxiliary valve Integrated scale Integrated lifting height indicator Overhead guard Dwsdpfx Aez Iwr Usl Aoc LED work light, front LED work light, rear Safety light, front Rear-view camera Side shifter If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 205

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Dsdpfx Ajz Iwimsl Ajwc Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Own weight: 17,510 kg Protective roof height: 3,000 mm UVV certification valid until: 08/2027 Starter batteries renewed: 01/2025 Operating hours: 3,410 h EQUIPMENT Former Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork adjuster Side shifter Full cab Air conditioning Heater Windshield wiper Multi-function display with touch function LED work light, front LED work light, rear Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light, rear Motec camera with view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 Dedpfxsw U Ehzs Al Ajwc * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 800 h, load capacity: 300 kg, arm reach: 21,000 mm, working height: 37,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 37 m Lateral reach: 21 m MACHINE DETAILS Self-weight: 18 t Load capacity: 300 kg Operating hours: approx. 800 h Mileage: approx. 5,000 km EQUIPMENT Vertical H+H stabilizers with additional lifting capability SPEED version with automatic stabilization at the touch of a button Proportional electro-hydraulic control with speed adjustment for all movements Boom/cabin protection device Manual emergency pump Emergency stop button Automatic stabilization Dwsdez Hz Hgepfx Al Asc Load moment limiter for double safety Automatic stabilization control from the basket and from the ground Internally routed cables for protection Safety bypass Maintenance and repair history: complete, including inspection records

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 766 h, load capacity: 500 kg, arm reach: 7,500 mm, working height: 15,900 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.90 m Lateral reach: 7.50 m Basket rotation: 90° + 90° Dimensions of aluminum basket: 1,200 × 700 × 1,100 mm Power outlet in the basket: 230 V Power outlet in the basket: 12 V Turret rotation: 700° Number of base plates: 4 MACHINE DETAILS Payload: approx. 500 kg Carrier vehicle: Piaggio Porter Djdpfx Aljz Hz D Se Aowc Operating hours: 766 h EQUIPMENT Hydraulic basket rotation Front basket mounting Pipes and cables installed in the boom Automatic closing of the boom section Automatic stabilization Lateral outriggers H + H with extra lift Automatic stabilization control from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Automatic engine speed regulation Possibility of simultaneous operation Display for centering the boom section in the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment Coming-home function Outline lighting for boom and turret Socage Connect Painting of boom and column parts in white, RAL 9016 Frame painting in black, RAL 9005 Painting of head and hydraulic cylinder in blue, RAL 5015

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Dodstqfq Ujpfx Al Aowc

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm MACHINE DETAILS Dodpfx Alsz Ebcls Aowc Drive system: CNC Control system: Beckhoff Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, overall weight: 2,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS UNITS Number of units: 10 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Edge rounding unit 7. Unit: Fine milling unit 8. Unit: Edge rounding unit 9. Unit: Radius drawing unit 10. Unit: Brushing unit ELECTRICAL DATA Voltage: 400 V Power: 16.2 kW MACHINE DETAILS Year of manufacture: 2020 Color: Gray CE marking: present Serial number: 20.082 Length: 6,000 mm Width: 1,410 mm Height: 1,670 mm Weight: 2,200 kg Transport length: 6,000 mm Transport width: 1,415 mm Transport height: 1,670 mm Transport weight: 2,200 kg Transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Tools for edge rounding unit Tools for fine milling unit Dwjdpfx Aoz Eawzjl Ajc Tools for radius drawing unit Tools for brushing unit

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 used - efficient Dwsdpfswcgdnox Al Aec

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dsdpfx Alez Hvyzs Ajwc Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.