Condition: good (used), Year of construction: 2015, machine/vehicle number: FS0B000351, type of input current: AC, measuring range Z-axis: 3,000 mm, total width: 260 mm, total length: 310 mm, total height: 100 mm, overall weight: 5 kg, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Technical Specifications: Guedjqxa Nispfx Ag Dek 3D Point Accuracy: ≤ 1.0mm Indoor Scanning Volume: Up to 8m³ IP Rating: IP52 Operating Temperature Range: 0 – 40°C Condition Details: Main Scanner and Laser: Impeccable condition Tablet, Calibration Board, and Accessories: Good condition with minor scratches Carrying Box: Displays wear but effectively protects the scanner Included in the Kit: Faro Freestyle-3D X Scanner Tablet Surface Pro 3 (Microsoft) Calibration certificate MicroSD Card and USB stick Calibration Plate Cleaning Kit Rugged Transport Case Company used scanner. Always kept in box after use.

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Godpfx Aex El Anog Djuk

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Gusdpfxox Ap I He Ag Dsk

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Guedox Ekuiopfx Ag Dok

Condition: ready for operation (used), 1 set (5 pieces) of micrometers, in wooden case Sizes: 0 - 25, 25 - 50, 50 - 75, 75 - 100, 100 - 125, 125 - 150 mm Gusdpfx Ajx Anp Njg Dek

Condition: excellent (used), CTS CTS CW-60/11 – Water-Cooled Climate Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for performing temperature and humidity testing on multiple specimens simultaneously. Device Description This climate test cell enables functional or material property testing of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculated air volume ensures optimal transfer conditions for the test specimens. The air conditioning section is located at the rear of the inner chamber. The system components are mounted in a separate frame behind the chamber for easy accessibility. Control electronics are housed in a discrete control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber can be performed via a blower. Technical Performance Data: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm wall clearance - Temperature ramp rate (supply air, linear): Gjdpfx Aox Ankyeg Dsuk Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 to ±5 % RH - Without thermal radiation - At equilibrium state Technical data assume ambient temperature of +25 °C, rated voltage 400 V, without test load, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable volume): - Volume: approx. 11,000 liters (11 m³) - Approximate internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously variable output via electronic control and monitoring system - Eco-friendly refrigerants: R 23 / R 404 A - Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping via freight carrier available – Costs & arrangements on request - Scope of delivery: (see picture) (Technical data subject to change and errors excepted.) Further questions can be answered by phone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 60586250, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, total height: 2,700 mm, type of input current: three-phase, total width: 1,600 mm, total length: 2,000 mm, Equipment: type plate available, Mitutoyo Crysta Apex V9106 – 3D coordinate measuring machine – measuring range 900 x 1000 x 600 mm Manufacturer: MITUTOYO Model: CRYSTA-Apex V9106 Year of manufacture: 2020 Measuring range: X: 900 mm Y: 1000 mm Z: 600 mm Gujdpfxox Ekdwe Ag Dsk Required space approx. 1.6 m x 2 m x 2.7 m

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. Guodpfjx Ein Ssx Ag Dsk - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: excellent (used), I sell Fischer Permascope ES measuring device. Price given for 1 piece. Gsdpfx Aovdychog Dsuk

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories Gujdpfex Ebx Ajx Ag Dsk ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Godpju Dw S Refx Ag Dsuk Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) Gjdjx Anipepfx Ag Deuk - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, type plate available, 3D SURFACE MEASUREMENT SYSTEM FOR 3D SURFACE INSPECTION IN THE SUB-MICRON RANGE MikroCAD software with MountainsMap® technology Comprehensive scanning, analysis, and reporting software The MikroCAD software combines hardware scanner integration, exposure adjustment, and live video feedback with MountainsMap® 3D analysis, visualization, and reporting to provide a seamless and efficient user workflow. Gujdpfxex Ebmte Ag Djk With MikroCAD, you can capture crucial surface information in the sub-micron range for a wide variety of applications. MikroCAD delivers detailed surface scans and analysis using industry-standard measurement tools, as well as reporting with effective visualization.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, For sale: SMA / EyeC Profiler 1200 DT (2022) — A0+ large-format archival & inspection flatbed scanner in excellent / like-new condition, with the original touchscreen protective film still in place. This unit comes with its dedicated Dell workstation and Dell monitor, fully configured with EasyScan / ScanWizard Touch software as originally supplied. Ready to operate immediately. Technical Specifications: Scan area: A0+ (1200 × 850 mm) Optical resolution: True 1200 dpi Lighting: LED cold-light system Hardware: Premium German SMA flatbed mechanism Branding: EyeC Proofiler outer chassis Software: EasyScan / ScanWizard Touch (license transferable) Interface: USB / SMB / FTP / Cloud Manufacture year: 2022 Condition: Like new Computer included: Dell Workstation PC (factory pre-installed) Dell monitor Power cables, USB, network cables Ideal for: National libraries & archives Universities (architecture, engineering, art) Museums Print & packaging quality control Map / blueprint digitization Cultural heritage projects Price: 68,000 € (EXW Turkey) Guodpfx Aox Ea Rwog Dek Photos and videos available. Worldwide shipping available.

Condition: excellent (used), Fischer Permascope ES measuring device. Gujdpovdyc Iefx Ag Djk

Condition: used, Faro Faroarm Quantum M Measuring Arm Arm Length: 3.0m Number of Axes: 7 axes Year of Manufacture: 2020 Gusdpfjx D Tnyjx Ag Dsk Model: 21000 Repeatability (SPAT): 0.0042 mm Volumetric Accuracy (EUni): 0.054 mm We are happy to provide you with a brochure for the software upon request. CAM2 Probe/Professional Stylus – €9,249 net/license CAM2 Essentials – €2,888 net/license You are welcome to arrange a viewing. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Please note that deviations from the technical data or errors in the article description may occur and are reserved.

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled; Guodpfx Asipq I Ieg Dek

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Gedpfx Agsx Ag R Ss Djuk Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Stock number: 2938 Godpfsvcbu Ajx Ag Douk Manufacturer: Wolpert Year of manufacture: 1960 Type: Testor HAT 1E Test method: Rockwell 150 kg Brinell 250 kg (?) Table diameter: mm Projection: 125 mm Test height: 200 mm Accessories: Machine is without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good

Condition: like new (used), Year of construction: 2022, For sale: SMA / EyeC Profiler 1200 DT (2022) — A0+ large-format archival & inspection flatbed scanner in excellent / like-new condition, with the original touchscreen protective film still in place. This unit comes with its dedicated Dell workstation and Dell monitor, fully configured with EasyScan / ScanWizard Touch software as originally supplied. Ready to operate immediately. Technical Specifications: Scan area: A0+ (1200 × 850 mm) Optical resolution: True 1200 dpi Lighting: LED cold-light system Hardware: Premium German SMA flatbed mechanism Branding: EyeC Proofiler outer chassis Software: EasyScan / ScanWizard Touch (license transferable) Interface: USB / SMB / FTP / Cloud Manufacture year: 2022 Condition: Like new Computer included: Dell Workstation PC (factory pre-installed) Guedpfx Agjx Ea Hxs Dek Dell monitor Power cables, USB, network cables Ideal for: National libraries & archives Universities (architecture, engineering, art) Museums Print & packaging quality control Map / blueprint digitization Cultural heritage projects Price: 68,000 € (EXW Turkey) Photos and videos available. Worldwide shipping available.

Condition: excellent (used), Beko Leak Detector measuring device in very good condition. Gedpfx Agovdx Sns Djuk

Condition: good (used), functionality: fully functional, machine/vehicle number: 66259, total width: 600 mm, total length: 800 mm, total height: 900 mm, overall weight: 500 kg, Contour measuring instrument Incl. granite measuring plate Plate dimensions: 670 x 450 mm Incl. various measuring tools NOTES ON COLLECTION: Gujdpfx Agoxnkb Se Dok Collection must take place strictly between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 900 mm, Coord 3 Metris Hera 12/9/9 measuring machine Measuring range: 1200x900x900 Head: Renishaw PH10M Sensor: Renishaw TP20 Probe changer: not present Controller: CC3/2 Guedel D I S Uepfx Ag Djk Software: Arco Cad 2.8 Year of manufacture: 2008 Warranty: to be agreed Description: machine in perfect working order and excellent cosmetic condition. Can be retrofitted with Renishaw UCCT3 Plus control and CMM Manager software

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Gujdpfx Agsxz A Evs Dsk Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Gedpfovbwziex Ag Djuk Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.