Used Other measuring & testing equipment for sale (192)

Condition: used, optical angel measuring unit. Bvkvawrec3

Condition: good (used), Make: AMETEC / ATLAS, Type: Xenotest 440, Ser. No. 1804020, 2 x 2,200 W air-cooled xenon lamps, 2,310 cm² exposure area, irradiance (300 - 400 nm), rotating sample carousel, touchscreen with color display Cuhxmxf2Tg +++ Attention: Device is part of an online auction! +++

Year of construction: 2021, Condition: as good as new (ex-display), Functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Mswlevmz8 Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Cseagxa2Ma Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Functionality: fully functional, Beier GmbH Cable extension for EC screw technology, L=8m, 961249 080, 18 48 MPRO Model: 961249080 Type: 1848MPRO Dqnzyr Condition: Used

Condition: excellent (used), Digital height measuring device TESA MICRO HITE PLUS M 600 Dqnzwb Measuring range max. 600 mm, programmable digital display

Year of construction: 2021, operating hours: 50 h, Condition: as good as new (ex-display), Functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. 9Ykxx8Vlcj Lens mount: C screw mount

Condition: new, Functionality: fully functional, INGUN Prüfmittelbau GmbH High-current contact pin, (1PE=60pcs.), HSS 118 0488, HSS 118 306 200 A 3002 C3S0Vcic Model: HSS1180488 Type: HSS118306200A3002 Condition: New Technical Data: HSS-118 20A

Condition: new, Functionality: fully functional, OPTO Engineering Bi-telecentric lens for 2/3″ detectors, TC23072 Model: TC23072 Condition: New Technical data: TC General information: Most important optical specifications Magnification (x): 0.122 Image circle diameter (mm): 11.0 Maximum sensor size: 2/3″ Image area of the object (mm × mm): 69.67 x 58.11 Extended optical specifications Gomens Working distance (mm): 226.8 Effective aperture: 8 Typical telecentricity (max) (deg): < 0.04 (0.08) Typical distortion (max) (%): < 0.03 (0.07) Depth of field (mm): 27.80 Resolution (μm): 42 Mechanical specifications Mount: C Phase adjustment: Yes Length (mm): 299.2 Front diameter (mm): 116 Weight (g): 1480

Condition: used, Micro Epsilon laser triangulation sensor and controller - system with interface RS232, ILD1800 10 (100), optoNCDT 1800 Model Sensor:  ILD180010(100), Model Controller:  optoNCDT1800 Ffhlyiz8 Articel number:  4120021.100 The unit consists of one sensor and one controller – they all are harmonized/calibrated. Option 100: - focus of SMR Measuring range: 10mm Start of measuring range: 30mm Midrange: 35mm End of measuring range: 40mm Measuring rate: 5 kHz Permissable ambient light: 10.000lx Light source: 1mW, 670nm Laser safety class:  class 2 Analog Output:  ± 5V Digital Output: RS232 Power supply:  24 VDC (±15 %), max. 500 mA

Condition: used, Micro Epsilon laser triangulation sensor and controller - system, ILD2210 20, optoNCDT 2200 Model Sensor:  ILD221020 Model Controller:  optoNCDT2200 The unit consists of one sensor and one controller – they all are harmonized/calibrated.   Measuring range: 20mm Start of measuring range: 90mm Midrange: 100mm End of measuring range: 110mm Measuring rate: 10 kHz Permissable ambient light: 30.000lx Light source: 1mW, 670nm (red) Laser safety class:  class 2 Analog Output:  ± 5V (-10V ... +10V) Digital Output:  RS 422 / 687,5kBaud Power supply:  24 VDC (±15 %), max. 500 mA Coqyvyed Controller funktions:  Auto Zero / signal averaging

Condition: used, SPIRENT Test Configuration Unit SR 5058 SN UCU290B3 Model: SR5058 C3Pzznyz S/N:  UCU290B3

Condition: used, machine/vehicle number: SN: 020702, Feinmess Dresden GmbH, Display Handling System, DHS 1 GModel:  DHS1G Dnjwlf

Condition: used, KLA Tencor ICOS Vision Systems N.V. Solar cell testing system, PVI 6, FSPI, VC100056 04Model: PVI6FSPIControl unit: VC10005604 (Alias: MS10490004)Housing 19'' 4U - 4X2 PCI66 - Configuration 1Camera: ICOS-IVCAccessories: Operator ManualConcise Manual SCI(B)CD with Windows XPCD with MMI softwareNotice: This PVI-6FSPI solar cell testing system is eral: The PVI-6™ is designed for inline optical double-sided inspection of photovoltaic wafers and cells. The PVI-6 solar cell inspection system offers companies that manufacture solar wafers the ability to inspect solar wafers and cells at all stages of the production process with the highest speed and accuracy. With these new features, companies that manufacture solar wafers can significantly increase their yield and classify their products more PVI-6 Solar Cell Inspection System consists of a family of inspection modules designed to inspect solar wafers and cells throughout the manufacturing process, from bare wafer to SiN coating, metallisation and final classification. In addition, the PVI-6 solar cell inspection software provides enhanced usability and analysis tools to increase the overall yield of the solar wafer and cell manufacturing PVI-6 offers the following benefits to companies manufacturing solar wafers and cells: Higher accuracy and repeatability of measurements with up to four times improvement in measurement accuracy, higher yield and improved cell classification at the end of the production line. Easier calibration and set-up, with calibration time reduced by approximately 80 per cent, enabling faster product ramp-up during initial installation - Tool customisation and centralised module management, providing consistent and easily achievable results in large production environments across multiple production PVI-6 solar cell and wafer inspection system consists of a family of inspection modules designed for the following purposes: Inspection of bare solar wafersInspection of wafers after silicon nitride (SiN) coating and after each metallisation stepClassification of end-of-line cells Bxxhunfzhm

Condition: used, h.a.l.m elektronik GmbH Germany, halm-B-Interface, Interface Box, cetisPV BI, cetisPV OUModel:  cetisPVBI, cetisPVOUVoltage: 24V DC Bjratqwib9P

Condition: used, h.a.l.m. elektronik GmbH Interface-Box, cetisPV OU Model: cetisPVOU 430mmx225mmx90mm Mounting plate length: 490mm Ndserbzxod

Condition: used, h.a.l.m. elektronik GmbH Xenon-Flasher Power Supply, cetisPV XF2 P, Power Unit U07 Model: cetisPVXF2P Data: 220VAC 50Hz 3,5kVA Joej3Jx3 Power unit Power: 220V AC, 50Hz, 3,5kW For solar cells IV-measuring system

Condition: used, MTI Instruments, Inc. Laser-sensor, LTC 120 20 SA Model: LTC12020SA Standoff: 120mm Range: ±10mm Resolution: ±2.5µm Spot size: 25µm Laser angle: 20° Laser wavelength: 670nm Bhsewfn02 Laser cable: standard 9, 20 optional Dimensions: 106.7 x 88.9 x 36.3mm

Condition: used, h.a.l.m. elektronik GmbH Interface-Box, 3x4Ban f 2x13W3 f , cetisPV Adap Model: 3x4Banf2x13W3f Ksotf2Uc 3x4Ban(f) - 2x13W3(f) 3x voltage and current input upper busbar: Stecker DB-13W3 female lower busbar: Stecker DB-13W3 female

Condition: used, Micro Epsilon laser triangulation sensor and controller - system, ILD1800 50, optoNCDT 1800 Model Sensor:  ILD180050 Model Controller:  optoNCDT1800 Article Number:  4120023 The unit consists of one sensor and one controller – they all are harmonized/calibrated. Ci78Ujch Measuring range: 50mm Start of measuring range: 45mm Midrange: 70mm End of measuring range: 95mm Measuring rate: 5 kHz Permissable ambient light: 10.000lx Light source: 1mW, 670nm (red) Laser safety class:  class 2 Analog Output:  ± 5V Power supply:  24 VDC (±15 %), max. 500 mA

Condition: used, Micro Epsilon laser triangulation sensor and controller - system, ILD2200 2, optoNCDT 2200 Model Sensor:  ILD22002 Model Controller:  optoNCDT2200 Article number:  4120038 The unit consists of one sensor and one controller – they all are harmonized/calibrated.   Measuring range: 2mm Start of measuring range: 24mm Midrange: 25mm End of measuring range: 26mm Measuring rate: 10 kHz Permissable ambient light: 30.000lx Light source:  <1mW, 670nm (red) Laser safety class:  class 2 Fk0Fzx20 Analog Output:  ± 5V Digital Output:  RS 422 / 691.2kBaud Power supply:  24 VDC (±15 %), max. 500 mA Controller funktions:  Auto Zero / signal averaging

Condition: used, machine/vehicle number: SN: UCU310K1, SPIRENT Test Configuration Unit SR 5058L SN UCU310K1 Model: SR5058L Dnjvwr S/N: UCU310K1

Condition: used, Branson, SM1130153, Combination Transducer Series 9500, BG3909LModel: BG3909L Bxv7Xj0Yjk

Condition: used, machine/vehicle number: SN: 020701, Feinmess Dresden GmbH, Display Handling System, DHS 1Model:  DHS1 Bjragmpogtc

Condition: used, h.a.l.m. elektronik GmbH Flash tube cassette, cetisPV XT1 Model: cetisPVXT1 For Solar Simulator Accessory: cetisPV-XFZ2 Bjrdgqcujtk