Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Item No.: 1004501 Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Dobu S Tdowcqrpj Hekl Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, type of input current: AC, overall weight: 7 kg, outer dimension length: 223 mm, outer dimension width: 172 mm, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, The Datacolor® 200R delivers reliable and easy-to-use color measurements for paint and coating applications. The instrument is fully backward compatible with the existing Datacolor 110, making it a seamless complement or replacement. Designed specifically for use in paint retail, it features a compact, modern design for plug-and-play operation. Calibration is required less frequently, allowing for longer uptime. Thanks to the new service indicator light, you can have even greater confidence in your measurements. Confidence in Measurements Laboratory-Accurate Measurements Prevent Errors and Save Time and Money The Datacolor 200R utilizes the patented SP2000 spectral analyzer to provide paint retailers with laboratory-accurate color measurements. This enables paint retailers to achieve the same high-quality color matches expected from a color laboratory in their stores, saving time and money on color corrections. Spherical geometry with automatic gloss trap Dkobewff S Nju S Td Hsl With the sphere geometry of the Datacolor 200R, color measurements can be performed on both smooth and textured samples. Automatic gloss compensation thus guarantees perfect color matching. Significantly reduced calibration frequency ensures longer uptime When customers are waiting in the salesroom, there simply isn't time to calibrate the instrument. The calibration of the Datacolor 200R is retained for up to two weeks, maximizing your shop's productivity without any loss of accuracy.

Year of construction: 2017, Condition: good (used), - Standard deviations: 0.01 g/l - In good condition Dobu Sewff A Is Td Hekl

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 30 h, Functionality: fully functional, Scanner it is in very good condition, it was used only occasionally.All the details is on attached brochure. Price is without VAT for company from EU except Romania and non EU company and private people where we add 19% on invoice. Dkjbu S Tdot Uc Ano Hjl

Condition: ready for operation (used), Year of construction: 2000, A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025. Djbjwd S Unou S Td Hskl

Condition: used, Year of construction: 2010, Functionality: fully functional, Precision scale ES 1220M-FR Djbu S Tswd Sg Rsd Hokl Sale exclusively to commercial customers. All information and content are provided without guarantee. Errors and changes excepted. We reserve the right to change, update, revise, or delete data at any time.

Condition: excellent (used), Vötsch Type: VC 7034 Climatic Test Chamber with Humidity and Air-Cooled Touch Panel Powerful 32-bit Control, Monitoring, and Regulation System Technical Description: Characteristics for Temperature Tests: Temperature Range -70°C to +180°C Temperature Deviation in Steady State according to IEC 60068-3-5, depending on the test chamber temperature temporally ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature Rate of Change according to IEC 60068-3-5 Heating: approx. 3 K/min. Cooling: approx. 2 K/min. Heat compensation max. approx. 1000W Characteristics for climatic tests: Temperature range +10°C to +95°C Temperature deviation in steady state according to IEC 60068-3-5 depending on the test room temperature temporally ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Distance between measuring points and wall: 100 mm Humidity range 10% to 98% RH Debu S Towck Dljd Hokl Dew point range -3°C to +94°C Humidity deviation in steady state, depending on the climatic value temporally ±1.0% RH to ±3.0% RH Heat compensation 400W at 25°C to 90°C Humidity up to max. 90% RH F. is maintained Data for installation and operation: Test chamber: Width 580 mm, Depth 765 mm, Height 750 mm Housing (installation dimensions): Width 865 mm, Depth 1595 mm, Height 1780 mm Penetrations 1 50 mm diameter penetration installed on the left 1 125 mm diameter penetration installed on the right Test chamber volume: approx. 335 liters Refrigerant R-452a + R23 Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 5.9 kW Nominal current approx. 12.0 A (neutral conductor loaded) Fuse protection 16 A slow-blow, on-site Weight approx. 500 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, C20333308217 LP, SPD-10A, Shimadzu, UV-VIS detector Model: C20333308217 LP Type: SPD-10A Condition: Used Note on condition: incomplete, connection screw for hose missing Debu S Tjutclmjd Hekl

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Dksbuevb E Uqs S Td Hel Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, VHX-S15CE, Keyence 3D Automatic Measurement Unit (Control Unit) - New Model: VHX-S15CE Type: VHX-S15CE Dobu S Tjq S Ti Tjd Hekl Condition: New

Condition: new, 573346, SFAM-90-5000L-M-2SA-M12, Festo, flow sensor Model: 573346 Type: SFAM-90-5000L-M-2SA-M12 Dsbu S Tdovrgtce Hjkl Condition: New

Condition: used, 564938, SFAM-62-5000L-M-2SA-M12, Festo, flow sensor Dksbu S Tovrgq Ied Hol Model: 564938 Type: SFAM-62-5000L-M-2SA-M12 Condition: Used

Condition: used, 610331, DIG 58B-2500-AB-I05-SC8-D78, Wolke, rotary encoder, left, Type B Model: 610331 Type: DIG 58B-2500-AB-I05-SC8-D78 Condition: Used Dksbovrhnheu S Td Hel

Condition: new, F201CV-2K0-PGD-88-V, Bronkhorst, Digital Mass Flow Controller, 2000 sccm H2 Dkobu S Tdevrg Elo Hjl Model: F201CV-2K0-PGD-88-V Condition: New

Condition: used, EL-FLOW Select F-201CV, 100 sccm SiH4, Bronkhorst High-Tech BV, Digital Mass Flow Controller Djbeq S Ub Sou S Td Hjkl Model: F-201CV Condition: Used

Condition: new, VHX-600E, Keyence Digital Microscope - New Dksbujq S Ti Ee S Td Hsl Model: VHX-600E Type: VHX-600E Condition: New

Condition: new, 540-201, T-Guard2 sensor, INFICON, leak tester Model: 540-201 Dkobu Soutb N Do Td Hjl Type: T-Guard2 sensor Condition: New

Condition: used, C2410121, Vertex 320, Micro-Vu, CNC multi-sensor measuring system, with base Model: C2410121 Type: Vertex 320 Dkobu S Tst H I Umjd Hol Condition: Used

Condition: used, E5515C, 8960 Series 10, Agilent Technologies Wireless Communications Test Set + Options S/N: GB47390265 Model: E5515C Condition: Used Djbu S Tdeq S Svke Hskl

Condition: used, E5515C, 8960 Series 10, Agilent Technologies Wireless Communications Test Set + Options S/N: GB44051410 Dksbu Soq S Svge Td Hsl Model: E5515C Condition: Used

Condition: used, E5515C, 8960 Series 10, Agilent Technologies Wireless Communications Test Set + Options S/N: GB47460226 Model: E5515C Dkjbu Sjq S Su Ro Td Hol Condition: Used

Condition: used, E5515C, 8960 Series 10, Agilent Technologies Wireless Communications Test Set + Options S/N: GB47460179 Dsbu Soq S Svnj Td Hekl Model: E5515C Type: 8960 Series 10 Condition: Used

Condition: as good as new (ex-display), 34317387, L40/620/DB-AZ48/90, Radium Xeradex Xenon Excimer Emitter - As New Model: 34317387 Dkjbujq S S Tto S Td Hol Condition: As New

Condition: used, S/N: TA21024, 000012955, Anite Baseband Processor Debu Soq S Sggs Td Hekl Model: 12955 Condition: Used

Condition: used, S/N: TA21025, 000012955, Anite Baseband Processor Djbjq S Svrsu S Td Hskl Model: 12955 Condition: Used