Year of construction: 1983, condition: used, weight 100 kg 2 Stück Redpfew Sygyex Adasn height 700 mm

Condition: excellent (used), Binder Model MKF 115 E3.1 Redpfx Ajx Ux Ivjdajn Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: Redpfxsd Ambtj Adasn metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Redoglp Nqopfx Adaen Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 200 mm, type of input current: AC, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished Mahr Multiscope 662 (factory acceptance before delivery) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update für windows 10 (Windows 11 and OptiCheck2025 optionally available) free lifetime software hotline, and user support. Optional delivery with factory service or shipping, worldwide. Online or on-site demonstrations available with customer parts, and application consulting by accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training and educational programs also available as online courses. Rental, hire purchase, or financing directly through Profitech without a financial institution. Measuring device customizable to customer needs. Multisensor measuring device equipped with a camera, laser, and Renishaw probing system. Measuring range for all sensors: 600x600x200mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base) Max. load capacity: Glass plate 40kg Accuracy: U1=2.4 + L/150; U2=3.2 + L/125; U3=3.9 + L/100 (L= measuring length in mm) Max. travel speed: 250mm/s Including 2-step zoom camera Including laser Including LED ring light Including Renishaw TP200 probing system Including frame grabber (Eagle) Including Windows 10 Including new Optichek 3D 5.0 evaluation software Rsdpfxeu Dw T Us Adajn Including Renishaw TP200 probing system During optional commissioning and calibration, the measuring device can be programmed for customer-specific parts so that you can immediately run your measurement programs even before any required training.

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning Rjdpfxsuq Nfho Adasn

Condition: used, functionality: fully functional, Renishaw PH9 Mk2 Probe Head 180° Used item from laboratory stock, fully functional but with signs of use. Optionally, this item can also be supplied with accessories or a probing system (TP2, TP20, TP200...) or preconfigured according to your requirements and availability. Shipping is possible throughout Europe (surcharge applies). Rjdpfowrxk Eex Adaen As this is a used part, we sell this accessory to the best of our knowledge and belief, but without guarantee or warranty.

Condition: refurbished (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2025. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera including lasers Rodpfx Adjdy Uvmoajn including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software

Condition: excellent (used), Keyence VL-350 optical coordinate measuring machine with control unit & software (plus VAT) For sale is a Keyence VL-350, a high-precision optical 3D coordinate measuring machine for industrial applications. Rsdpfx Adjxpt Rfjaon Technical highlights: Manufacturer: Keyence Model: VL-350 Measuring principle: optical 3D scanning / coordinate measurement Advantages: Contactless measurement – no deformation of the workpiece High-resolution 3D data acquisition Fast measuring cycles Intuitive operation via included software Scope of delivery: Keyence VL-350 main unit Control unit CD with product software Accessories as shown in the pictures The device is in excellent condition (see photos). Fully functional and ready for immediate use. The stated price is exclusive of statutory VAT. An invoice with separately shown VAT will, of course, be issued. Shipping or collection by arrangement.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: Redpjx Up Igsfx Adaon 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Rsdpfjycigwex Adajn

Condition: excellent (used), Binder Model: FP 115 Binder Drying Oven with Forced Air Circulation Description: For sale is a high-quality BINDER FP 115 drying oven / heating cabinet from a laboratory inventory. Ideally suited for laboratory, industrial, workshop, research, or educational use. The control is digital, and the temperature remains stable throughout operation. The interior is made of metal and equipped with multiple pull-out shelves. Maximum load: 11 – 50 kg Technical Data (as per nameplate): Max. temperature: 300 °C (572 °F) Rated power: 1.60 kW Connection: 230 V / 1~ Current consumption: 7.0 A Frequency: 50/60 Hz Protection class: IP20 Temperature safety: DIN 12880, Class 2.0 Internal volume: approx. 115 liters Internal width (incubators...): 600 mm Internal depth (incubators...): 410 mm Redox Uph Hspfx Adajn Internal height (incubators...): 480 mm External width (incubators...): 835 mm External depth (incubators...): 645 mm External height (incubators...): 705 mm Important note: "The table shown in the photos is not included in the sale." Item weight: 62 kg Condition: used Scope of delivery: (See photo) (Specifications and details subject to change and error!) If you have further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: TN52120936-08, total width: 1,000 mm, total length: 1,700 mm, total height: 1,800 mm, overall weight: 700 kg, TESA TESASCAN 52 length measuring device - Measuring range up to approx. 300 mm Rsdpex T Anqsfx Adajn Attention: The item must be collected between 18 and 26 February 2026 on a binding, to-be-agreed date. FCA D-78087 Mönchweiler – loaded onto truck

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: GLOB000080, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, total height: 2,280 mm, overall weight: 1,300 kg, input voltage: 230 V, compressed air connection: 8 bar, year of last overhaul: 2019, Equipment: documentation/manual, Hexagon / DEA Brown & Sharpe Global Image 07.10.07 – Bridge CMM (USED) – RC1 retrofit 2019 + PC-DMIS (env. 2021) We offer a fully functional 3D coordinate measuring machine DEA Brown & Sharpe Global Image 07.10.07 with Hexagon retrofit (2019). Key facts: - Measuring range (X/Y/Z): 700 × 1000 × 700 mm - Accuracy (ISO 10360-2): MPEE 1.7 + L/333 µm (verified by Hexagon, 01/2024) - Machine base: 2002 (mechanical platform) - Retrofit / controller & electronics: Hexagon RC1 (2019) - Software: Hexagon PC-DMIS (environment 2021) - Probe system: Renishaw PH10MQ motorized head + Renishaw TP200 touch probe - Stylus set: approx. 10 pcs included - Accessories: calibration sphere included What’s included: Rodpfsycg Dyjx Adajn - CMM machine + RC1 controller - PC/workstation with peripherals (monitor etc.) - PC-DMIS license / software key included (details to be confirmed during handover) - TP200 + PH10MQ + stylus set + calibration sphere Condition & history: - Regularly maintained; long-term operation in a controlled metrology environment (high precision optics production). - Stable air bearing operation, granite base in good condition. Utilities: - Air supply: clean & dry compressed air, approx. 6–8 bar (dryer recommended) - Power: 230 V / 50 Hz (to be confirmed) - Weight: approx. ≤ 1.3 t Location / availability: - Located in Czech Republic (Přerov area) - Available immediately after agreement (within days) - Inspection / live demonstration possible by appointment. Optional services: We can arrange professional dismantling, loading, transport, installation, leveling, re-calibration and operator training (Hexagon / qualified partner) depending on buyer needs. If you need additional photos, video, or the latest verification protocol, please contact us.

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. Rjdpfx Aswak Nvjdaen You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: excellent (used), KARG KARG Industrietechnik MeltFlow on – MFI/MVR Melt Flow Index Tester For sale is a MeltFlow on melt flow index tester (MFI/MVR) from KARG Industrietechnik, Made in Germany. The unit was used in plastics quality assurance and is in very good, well-maintained condition. Ideal for laboratories, quality assurance, development, and production in plastics processing. Technical data: Manufacturer: KARG Industrietechnik Model: MeltFlow on Code: 3200.000 Rated power: 1.6 kW Rated current: 7 A Voltage: 230 V / 50 Hz CE marking: yes Features & scope of delivery: - MeltFlow on tester - Set of weights: - 5.000 kg - 2.160 kg - 1.200 g - 5.000 g - Piston / plunger - Cleaning tool - Software CD: K-BASE software program V4.1 SP0 Important note: "The table shown in the photos is not included in the sale." Rodpfx Adox Trg Nsajn Condition: used Scope of delivery: (see picture) (Specifications and details are subject to changes and errors!) For further questions, please feel free to contact us by phone.

Condition: used, digital gauge Digibar Rsdpfx Adjcf Rb Tsaon is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Condition: used, Leakage tester/ventilation duct leakage tester Make Airflow UK Type LM 1 Serial number 125674 4 meter hose 230 Volt Rodpfxjcxb Has Adaon Documents available

Condition: ready for operation (used), MAHR Digimar 816 CL Height measuring device Measuring device Measuring device: Measuring range: 350mm Space requirement measuring device: 350mm x 280mm x 730mm further technical data see picture no. 2 Measuring plate: Dimensions: 630mm x 400mm x 70mm ( L x W x H ) Degree of accuracy: DIN 876/1 Rjdpfxovbf I Dj Adaon Perm. deviation: 0,016mm Actual deviation: 0.00505mm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), MAHR Digimar 816 CL Height measuring device Measuring device Measuring device: Measuring range: 350mm Redevbbr Sepfx Adasn Space requirement measuring device: 350mm x 280mm x 730mm further technical data see picture no. 2 Measuring plate: Dimensions: 630mm x 400mm x 70mm ( L x W x H ) Degree of accuracy: DIN 876/1 Perm. deviation: 0,016mm Actual deviation: 0.00465mm You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Keyence VHX-500F Digital Microscope Digital Microscope Objectives: 0-50x ; 20-200x You are welcome to come by for a viewing. Redpfxsunhkwe Adaon We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Rjdpfx Adsybbd Seajn Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 139437, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, type of input current: AC, input voltage: 230 V, compressed air connection: 5 bar, year of last overhaul: 2025, ambient temperature (max.): 35 °C, ambient temperature (min.): 13 °C, temperature: 20 °C, pressure: 4 bar, Equipment: documentation/manual, type plate available, 3D CNC coordinate measuring machine of the compact class. It fits into any office due to its low installation height. Features: - Base frame - VAST XXT sensor - Probe changer magazine - 3 probe changing plates - Calibration sphere with certificate - Machine folder, device documentation, user manual, various probes (see pictures) - HP XW 4600 workstation for Zeiss WIN XP and monitor + keyboard and mouse Dimensions in mm (without base): Length: 1160; Width: 1080; Height: 1803 With base: Length: 1170; Width: 1090; Height: 2480 Weight of the CMM in kg: without base: 350; with base: 445 Max. permissible workpiece weight in kg: 100 • Measuring volume: 500 x 500 x 500 mm³ • Duramax year: 2008 • Control panel: BP26 • Software: ZEISS CALYPSO 4.8 • Sensor: VAST XXT (probe changer, single-point measurement & scanning) • Accuracy (example according to ISO 10360-2): 2.4 + L/300 µm (at 18-22°C) Rsdpjx Tg Tkofx Adasn Runs without any issues and has been checked by us.

Condition: used, - Location: Bremen - Other Rsdpfx Ashzxizsdasn The multi N/C pharma UV is a compact instrument for safe and precise TOC determination in pure and high purity waters. It is in accordance with the requirements of the Water Monograph of the European Pharmacopeia Commission and the Monograph of the United States Pharmacopeia Convention (USP) and is particularly suitable for water monitoring in the pharmaceutical industry, but also for water monitoring in the semiconductor industry. The multi N/C pharma UV operates on the principle of wet chemical UV oxidation in combination with a particularly precise and CO2-selective NDIR detection. Various technical documents as well as operating instructions in English.

Condition: ready for operation (used), Year of construction: 2017, A Mitutoyo height measuring device including granite plate is available. Granite plate dimensions X/Y/Z: 1000mm/630mm/100mm, max. plate load: 300kg, plate weight: approx. 190kg, measuring range: 630mm, resolution: 0.001mm, min. repeatability: 1.8µm. Machine dimensions X/Y/Z: approx. 300mm/300mm/1050mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible. Rjdpfx Adoya Hx Ejaon