Used Laboratory equipment for sale (160)

Condition: used, This listing is for the This listing is for the Bruker microflex spectrometer mass The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Hsdpoxhdxqefx Afijfn Environment: Requires clean, stable temp/humidity condition

Year of construction: 2021, condition: excellent (used), We offer a countertop autoclave in very good condition. Autoclave Prestige Medical 12L, sterilization temp 121 stC Year of production: 2021 Brand: PrestigeMedical Model: Classic Extended Media Hjdpfx Afsumth Sjijfn Personal collection from Gadansk (Poland, Poland)

Condition: used, TECHNICAL DETAILS - Volume : 4.3 [l] Hfodpfxeu D I H So Afien - Timer : 0-120 [min] - Temperature setting : 0-100 [°C]

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 50/300 Chromatography column The unit is in full working condition and is ready for immediate use Hfodpfx Ajxhdxdofion The AxiChrom line is a series of chromatography columns by GE Healthcare (now Cytiva), designed for preparative / process chromatography scale. The “50/300” refers to the diameter and tube length / “bed height” configuration. Key details: 50/300: This is the smallest of the larger-scale columns. The “50” refers to the internal diameter (ID) of the column tube (50 mm), and “300” refers to the bed height (300 mm) for the “short” version. There is also a “50/500” for longer bed heights (500 mm). It uses axial compression, meaning the packing medium is compressed hydraulically from the top adapter, which helps ensure uniform packing density. The materials are designed to meet regulatory standards (USP Class VI, etc.

Condition: used, TECHNICAL DETAILS Hedjug U Rmepfx Afijfn - Magnification : W 10 x 21 B

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 The unit is in full working condition and is ready for immediate use AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Hsdpfxoxhdw To Afiefn Typical Uses Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: used, TECHNICAL DETAILS Hedjug U Rtjpfx Afisfn - Magnification : 6,4-10-16-40 - W 10/23

Condition: used, This listing is for the Amersham Pharma 35L BPG Cromatography Column The unit is in full working condition and is ready for immediate use BPG stands for Bio‑Process Glass or BioProcess Glass (sometimes called BPG columns). They are process‑scale chromatography columns used in biopharmaceutical / downstream protein purification. Hfsdpfx Afexhdw Hoisn Originally from Amersham / Pharmacia, now under GE Healthcare / Cytiva brands. Made to be hygienic, scalable, reproducible, for use in situations where high cleanliness, sterility, and regulatory compliance matter (e.g. GMP) A BPG column (short for BioProcess Glass column) is a process-scale chromatography column designed specifically for downstream purification in biopharmaceutical manufacturing — particularly for the purification of proteins, antibodies, and other biologics

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] Hfsdpfx Aou D I Hxofion - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn Hfjdpfx Afoxhdwyjien The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] Hfodpfeu D I H Esx Afion - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Condition: used, This listing is for the Sartorius MCA36201S-2S00-0 Cubis® II High Capacity Balance, 36,200 g x 100 mg The unit is in full working condition and is ready for immediate use The Cubis II line is a modular, high‑performance precision / high‑capacity balance series from Sartorius. This particular model (MCA36201S‑2S00‑0) is designed for applications needing a large weighing range (36.2 kg) with moderate resolution (0.1 g / 100 mg), combined with strong regulatory compliance, flexible hardware/software configuration, and advanced usability features Modular Design: The balance is part of a modular system — you can configure different weighing modules, display/control unit (MCA), draft shields, software application “QApps”, and accessories as needed. Hfedpfxsxhdwgs Afion Auto Leveling: Motorized, automatic level adjustment helps reduce errors related to improper leveling. Environmental Sensors: Includes sensors for climate/environmental monitoring to help ensure stable, accurate operation. Data Integrity & Compliance: The Cubis II MCA models are designed for regulatory compliance (e.g. 21 CFR Part 11, GLP/GMP), with features like audit trails, user management, electronic signatures, and safe data transfer.

Condition: used, TECHNICAL DETAILS - Objectives : 1.5X et 0.5X Hedpfx Afoug U Rgjijfn - Light : OLYMPUS HIGHLIGHT 3001

Condition: new, All Items Boxed in original Packaging. Supplier Catalogue No 5555305P9-SS-A EXPIRY DATE 31st July 2026 All Items Unused and boxed in there original Packaging - 4 Pieces Sartorius Lab Instruments Sartopure GF+ MidiCaps (0.65 µm, BH9, 4 pcs) are high-quality filter capsules designed for microbial removal and particle filtration in laboratory and industrial applications. Here’s a breakdown of their key features and specifications Hsdpjxhdvcofx Afiefn

Condition: used, This listing is for the Watson Marlow 323 Peristaltic Peristaltic Pump The unit is in full working condition and is ready for immediate use The 323 series from Watson‑Marlow is a benchtop “cased” pump line (sometimes called peristaltic or rotary tubing based pumps) designed largely for laboratory and light industrial applications. Key features include: A drive unit (“drive”) plus interchangeable pumphead/tubing to suit different flow rates, tubing types, chemical compatibilities. Versions available with different levels of control: manual speed control; auto/remote control; analogue inputs/outputs; RS‑232 etc. Hfodpexhdu Ejfx Afijn A membrane keypad and digital LCD on most models to set/display speed etc. Build is robust: chemically resistant ABS top, IP31 protection rating

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Hfjdjxhduxjpfx Afisn Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: used, This listing is for 1 of 2 Cecil CE1021 Spectrophotometers The units are in full working condition and ready for immediate use The Cecil CE1021 is a single‑beam UV/Visible spectrophotometer in the Series 1000 line from Cecil Instruments. It’s designed for general laboratory work, including educational, quality control, and routine analytical tasks Features & Functionality Automatic functions at switch‑on: self‑test and calibration. The instrument calibrates itself on Lamp / filter switching: Automatic lamp and filter selection coupled to the wavelength chosen. For example, if you select a UV wavelength, it will switch in the deuterium lamp; if you stay in visible, that lamp can be turned off to save life. Hjdjxhdulopfx Afiefn Absorbance Zero and 100% Transmission setting: Zeroing via button, both at absorbance zero (0 A) and full transmission (100 %T) automatically or by pressing buttons. “Peak Seek”: It has a function for automatically finding peaks, with baseline flattening. Useful for scanning spectra. RS‑232C Interface: There is a serial interface for connecting to a PC or printer in many units

Condition: used, This listing is for the Magellan Tandem Gas Analyser Hfjdpfx Afjxhdufeion The unit is in full working condition and is ready for immediate use Here’s a summary of the Magellan / H.E.L Tandem Gas Analyser (especially the Tandem PRO model), based on available specs and user info. If you want comparison with similar units, or more in‑depth performance data, I can also pull that together. The Tandem (Standard) and Tandem PRO gas analysers are instruments by Magellan Instruments / H.E.L designed primarily for monitoring O₂ (oxygen) and CO₂ (carbon dioxide) in gas streams. They are often used in biological / fermentation / bioreactor / cell culture / metabolic flux settings where gas composition is a key parameter

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Limitations / Considerations Hodpfxoxhdt Ij Afisfn Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Hfedpfxjxhdthe Afijn Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: used, This listing is for 1 of 3 Watson Marlow 630S Peristaltic Pumps These units are in full working condition and ready for immediate use A peristaltic pump moves fluid through a flexible tube by sequentially compressing the tube (like a wave) which pushes the fluid forward. Because only the inner surface of the tube contacts the fluid, the pump mechanism is isolated from the fluid — this is useful for: Handling corrosive, abrasive or sterile fluids Avoiding contamination (the pump body doesn’t contact the fluid) Easy maintenance (replace the tubing rather than the pump’s internal components) Watson‑Marlow is a well-known maker of such pumps in lab, process, pharmaceutical, chemical, water treatment, and industrial settings. Typical applications / use cases Because of the flexibility, purity, and control of peristaltic pumps, the 630S is used in: Hfsdpfx Afoxhdtbjion Chemical dosing / metering (acid, base, reagents) Pharmaceutical / biotech processes Water / wastewater treatment Food & beverage (for sterile or food-contact fluids) Laboratory and pilot-scale processing

Condition: used, This listing is for the Mettler Toledo ICS439 Weighing Terminal + Printer The unit is in full working condition and is ready for immediate use The ICS439 is a scale indicator / weighing terminal used to process signals from load cells (i.e. weight sensors) and display weight, tare, net, etc. It belongs to the ICS4_9 “wet environment / hygienic” family, meaning it is intended for use in harsher or wash‑down conditions (e.g. food processing, pharmaceutical, industrial) where water, cleaning, or humidity are a factor. It can function either as a standalone terminal (connected to a weighing platform) or as a compact scale (terminal + platform combined) depending on configuration Use Cases & Applications Hfjdpfxexhdr Ro Afien Often used in industrial / production settings for basic weighing and checkweighing (i.e. verifying whether a weight is above / below a target threshold) Particularly suitable for hygienic / wet environments (e.g. food processing, chemical, pharma) due to its high ingress protection and stainless steel construction. Can integrate into plant control systems via its communication interfaces to send weight data to a computer/PLC for automation or logging

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use Hfjdpfxjxhdqto Afion The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, This listing is for the Pierre Guerin 1000L Fermenter. The unit is in full working condition and is ready for immediate use. Overview The Pierre Guerin 1000L Fermentation System is a high-capacity, stainless steel bioreactor/fermenter engineered for process development, scale-up, and clinical or commercial production. With a working volume of approximately 700–800 litres, this system bridges pilot and production scale, delivering robust performance, exceptional process control, and full compliance with GMP and FDA requirements. Built by Pierre Guerin, a global leader in sanitary stainless steel process systems, the 1000L fermenter is ideal for demanding applications in biotech, pharmaceutical, food, and industrial biotechnology sectors. Key Features Hfedpfxjxgqcmo Afion Advanced Bioprocess Control Automated Regulation: Precise control of pH, DO, temperature, agitation, antifoam, and feeding, with optional cascade control strategies. SCADA Integration: Seamless connectivity with Siemens, DeltaV, or Rockwell Automation for full process automation and data logging. Sterile Processing: Designed for SIP (Steam-in-Place) and CIP (Clean-in-Place) operation for maximum sterility and cleanability. Robust, Hygienic Design 1000L Total Volume with up to 800L working volume, ideal for late-stage development and pre-commercial production. 316L Stainless Steel Vessel: Internal surfaces electropolished to Ra ≤ 0.6 μm for hygienic and corrosion-resistant performance. Jacketed Construction: Provides accurate temperature control via integrated thermal fluid systems. Technical Specifications Model: Pierre Guerin 1000L Fermentation System Total Volume: 1000 liters Working Volume: Approx. 700–800 liters Vessel Material: 316L stainless steel Surface Finish: Ra ≤ 0.6 µm (electropolished), optional ASME BPE compliance Sterilization: Fully SIP-capable Agitation: Top- or bottom-mounted agitator with mechanical seal Temperature Control: Jacketed vessel with PID regulation Sensor Ports: For pH, DO, temperature, level, pressure, and foam control Applications Pharmaceuticals: Production of therapeutic proteins, enzymes, and vaccines Biotechnology: Cultivation of microbial, yeast, or mammalian cells Food & Beverage: Probiotics, fermentation-derived ingredients Industrial Biotech: Fermentation of biofuels, organic acids, and fine chemicals R&D and Pilot Production: Seamless scale-up from lab-scale to commercial batches System Components 1000L jacketed stainless steel fermenter with dished head and conical bottom High-efficiency agitator with variable speed drive Integrated control system with touchscreen HMI Gas flow regulation via MFCs (Air, O₂, CO₂, N₂) Foam and level control with automated dosing Sampling valve, exhaust condenser, and sterile utility connections CIP/SIP spray devices and drainable piping Quality Assurance Pierre Guerin systems are designed and built to meet global regulatory standards including GMP, FDA, and ASME BPE. Each system undergoes rigorous FAT (Factory Acceptance Testing) and can be delivered with full IQ/OQ documentation, 3.1 material certificates, and orbital weld documentation. Benefits High Productivity: Large working volume supports batch, fed-batch, or continuous processes Scalable Design: Mimics lab-scale conditions to ensure reliable scale-up Superior Cleanability: Full CIP/SIP compatibility and sanitary design Automation-Ready: Compatible with advanced control platforms Regulatory Compliance: Built for use...

Condition: used, This listing is for the Telstar Laminar Air Flow System. The unit is in full working condition and is ready for immediate use. Overview Telstar Laminar Air Flow (LAF) Systems provide a controlled clean air environment by delivering unidirectional, HEPA-filtered airflow designed to protect sensitive processes and personnel from particulate contamination. Engineered with precision and reliability, these systems are widely used in pharmaceutical, biotechnology, electronics, and food industries where contamination control is critical. Key Features Superior Air Quality Control Unidirectional Laminar Flow: Provides a smooth, uniform air stream that prevents cross-contamination by sweeping away airborne particles. HEPA Filtration: High-efficiency particulate air filters (≥99.99% removal of 0.3 µm particles) ensure ultra-clean air supply. Low Turbulence Velocity: Optimized airflow velocity for operator comfort and process protection. Flexible and Ergonomic Design Multiple Configurations: Available as vertical or horizontal laminar flow units to suit different process requirements. Compact & Modular: Easily integrated into laboratory benches, cleanrooms, or production lines. User-Friendly Interface: Intuitive controls and indicators for airflow velocity, filter status, and maintenance alerts. Technical Specifications Model Variants: Telstar offers various models with airflow rates tailored to application size and requirements. Airflow Velocity: Typically 0.3 – 0.5 m/s laminar flow velocity, adjustable depending on model. Filtration: H14 HEPA filters, tested to EN1822 standards. Construction: Stainless steel and powder-coated steel with antimicrobial finish options. Noise Level: Designed for low acoustic emissions, suitable for laboratory environments. Applications Pharmaceutical Manufacturing: Sterile compounding, aseptic filling, and clean area protection. Biotechnology: Cell culture and sterile media preparation. Electronics: Clean assembly of sensitive components. Food & Beverage: Protection during packaging and ingredient handling. Research Laboratories: Sample preparation and analytical processes requiring contamination control. System Components High-efficiency HEPA filtration module Blower/fan assembly with speed controller Laminar flow plenum and diffuser Stainless steel or antimicrobial coated work surface Air velocity sensors and control panel Optional UV-C sterilization module Hfjdpfx Asxgqaxsfijn Pre-filters and pressure gauges for maintenance monitoring Quality Assurance Telstar Laminar Air Flow Systems are manufactured according to ISO 14644 cleanroom standards and undergo rigorous factory testing for airflow uniformity, filtration efficiency, and noise levels. All units are documented with performance certificates to ensure compliance with industry regulations. Benefits Ensures a highly controlled, contamination-free work environment Protects sensitive processes and personnel from airborne particulates Easy installation and integration into existing cleanroom setups Simplifies compliance with GMP and cleanroom classification standards Designed for durability and ease of maintenance Conclusion The Telstar Laminar Air Flow System offers reliable, high-efficiency air cleanliness solutions tailored for sensitive industrial and laboratory applications. Its robust design, combined with superior airflow performance and ease of use, makes it an essential component for maintaining contamination-free environments.